0000000000190230
AUTHOR
Nick Thom
Use of bitumen-stabilised ballast for improving railway trackbed conventional maintenance
Despite its many advantages, ballasted track needs frequent maintenance to ensure an adequate quality of service. However, tamping, traditionally used to correct geometry, causes ballast degradation and loosening of the already compacted ballast layer, which quickly returns the track to its pre-maintenance position. Then, other maintenance techniques such as stoneblowing, as well as diverse solutions that reinforce trackbed, have been developed to reduce ballast settlement and particles degradation. Given the need to further advance research in this field, bitumen-stabilised ballast (BSB) has started to be investigated by the authors as a feasible solution thanks to its easy and quick appl…
Evaluation of Load transfer in rigid pavements by Rolling wheel deflectometer and Falling weight deflectometer
Abstract Rigid pavements have widespread use, e.g, in motorways and airports, due to their excellent properties such as high bearing capacity and long lifetime. However, when rigid pavements fail it is often due to bad load transfer efficiency (LTE) at its joints. Traditional methods of measuring LTE can be time consuming. Here, we study the possibility of measuring LTE using a moving load with the aim of achieving higher productivity. An experiment simulating Rolling Weight Deflectometer (RWD) measurements on a joint was carried out to gain understanding and confidence that can guide the analysis of real RWD data. Continuous data from measurements across a joint allows for determination of…
Thermo-rheological analysis of WMA-additive modified binders
AbstractThermo-rheological characteristics of unmodified and modified bitumen have significant impacts on the mechanical response of asphalt. This study investigates the impacts of an organic and a chemical Warm Mix Asphalt additive on bitumen thermo-rheological and mechanical characteristics. Modified binders with different concentrations of each additive were studied and analysed comparatively to a 40/60 penetration grade bitumen. Frequency sweep tests were performed at different ageing levels to characterise the Linear Viscoelastic properties. The multiple stress creep and recovery, linear amplitude sweep (LAS) and low temperature creep stiffness tests, together with the Glover–Rowe (G–R…
Data Compression Approach for Long-Term Monitoring of Pavement Structures
Pavement structures are designed to withstand continuous damage during their design life. Damage starts as soon as the pavement is open to traffic and increases with time. If maintenance activities are not considered in the initial design or considered but not applied during the service life, damage will grow to a point where rehabilitation may be the only and most expensive option left. In order to monitor the evolution of damage and its severity in pavement structures, a novel data compression approach based on cumulative measurements from a piezoelectric sensor is presented in this paper. Specifically, the piezoelectric sensor uses a thin film of polyvinylidene fluoride to sense the ener…
Novel performance-based technique for predicting maintenance strategy of bitumen stabilised ballast
Abstract Despite being the most used worldwide, railway ballasted tracks presents high maintenance cost related to ballast settlement and particle degradation. With the aim of reducing life cycle costs, bitumen stabilised ballast (BSB) has been recently proposed as a relatively cheap alternative maintenance solution to be applied to existing tracks. This study aims at assessing the potential advantages of this technology, defining a novel maintenance strategy of traditional ballasted track-beds. A protocol for the application of the BSB technology and its associated maintenance strategy is defined. To estimate minor and major maintenance operations of BSB scenario in comparison to tradition…
Bitumen stabilized ballast: a potential solution for railway track-bed
Railway ballast degradation under dynamic loads progressively leads to loss of mechanical performance and geometry of the track, so that maintenance interventions are frequently needed. In order to system- atically avoid this issue, recently solutions have been proposed to reinforce track-bed by using polyur- ethane and/or resins as well as asphalt layers among others. Nonetheless, their main limitations are related to the high initial cost and low productivity. To cope with these limitations, in this study, bitumen stabilized ballast (BSB) is proposed as a new solu- tion for ballast stabilization. This method aims at improving durability and reducing settlement by mod- ifying both stiffnes…
Design considerations of high RAP-content asphalt produced at reduced temperatures
In many countries recycling of reclaimed asphalt pavement (RAP) for road surface layers is limited to a maximum of 10–30%. This is due to technical limitation of common asphalt plant but also to specifications that are still restrictive when it comes to increasing RAP in surface courses. The mistrust in this practice is mainly related to uncertainty in performance of these mixes as well as to existing fundamental issues with the mix design, especially when production temperatures are lowered. This paper analyses some of the factors affecting the design of warm asphalt mixtures for surface course layers containing 50% RAP, and suggests a framework to justify the common assumption of full ble…
Optimización de las propiedades de emulsión de betún para la estabilización de balasto
Ballasted track, while providing economical and practical advantages, is associated with high costs and material consumption due to frequent maintenance. More sustainable alternatives to conventional ballasted trackbeds should therefore aim at extending its durability, particularly considering ongoing increases in traffic speed and loads. In this regard, the authors have investigated a solution consisting of bitumen stabilised ballast (BSB), designed to be used for new trackbeds as well as in reinforcing existing ones. This study presents the idea behind the technology and then focuses on a specific part of its development: the optimisation of bitumen emulsion properties and dosage in relat…
Toward the Development of Load Transfer Efficiency Evaluation of Rigid Pavements by a Rolling Wheel Deflectometer
The jointed rigid pavement is currently evaluated by the Falling weight deflectometer which is rather slow for the testing of the jointed pavements. Continuous nondestructive evaluation of rigid pavements with a rolling wheel deflectometer can be used to measure the load transfer and is investigated. Load transfer is an important indicator of the rigid pavement&rsquo
Monitoring road pavement performance through a novel data processing approach, accelerated pavement test results
This research presents a novel performance-based interpretation method for continuous monitoring of pavement condition through the use of piezoelectric sensors. The objective of this study is to validate the compressed cumulative loading event approach, implemented in a previously developed piezoelectric sensor, for detecting subsurface fatigue cracking through full-scale accelerated pavement testing. A piezo-electric film of polyvinylidene fluoride is used to harvest the microstrain energy induced by the traffic loading at the surface. Epoxy is used to protect the sensor following a H-shape packaging. Piezoelectric sensors were exposed to approximately 1.0 million load repetitions between …