0000000000217176

AUTHOR

Francesco D'acapito

showing 7 related works from this author

Double implantation in silica glass for metal cluster composite formation: a study by synchrotron radiation techniques

2001

Silica glass containing metal clusters is studied for both basic and applied aspects, related to the physics of cluster formation and to the optical properties of these materials. To obtain such composite structure, Cu+ Ni, Au+ Cu, Au+ Ag, Cu+ Co, and Cu+ Ag sequential implantations in fused silica were realized. The resulting systems, after possible annealing in various atmospheres, were studied by synchrotron radiation-based techniques, namely, extended X-ray absorption fine structure (EXAFS) spectroscopy, grazing incidence X-ray diffraction (GIXRD), and grazing incidence small angle X-ray scattering (GISAXS). The unique potential of these techniques is the capability to investigate dilut…

Materials scienceExtended X-ray absorption fine structureScatteringSmall-angle X-ray scatteringAnalytical chemistrySynchrotron radiationCondensed Matter PhysicsElectronic Optical and Magnetic MaterialsCrystallographyIon implantationMaterials ChemistryCeramics and CompositesCluster (physics)Grazing-incidence small-angle scatteringSpectroscopyJournal of Non-Crystalline Solids
researchProduct

The evolution of the fraction of Er ions sensitized by Si nanostructures in silicon-rich silicon oxide thin films

2009

Photoluminescence (PL) and time-resolved PL experiments as a function of the elaboration process are performed on Er-doped silicon-rich silicon oxide (SRO:Er) thin films grown under NH(3) atmosphere. These PL measurements of the Er(3+) emission at 1.54 microm under non-resonant pumping with the Er f-f transitions are obtained for different Er(3+) concentrations, ranging from 0.05 to 1.4 at.%, and various post-growth annealing temperatures of the layers. High resolution transmission electron microscopy (HRTEM) and energy-filtered TEM (EFTEM) analysis show a high density of Si nanostructures composed of amorphous and crystalline nanoclusters varying from 2.7 x 10(18) to 10(18) cm(-3) as a fun…

PhotoluminescenceMaterials scienceEr ions; photoluminescence; Energy transfer; X-ray absorption spectroscopy[SPI.OPTI] Engineering Sciences [physics]/Optics / PhotonicAbsorption spectroscopySiliconAnnealing (metallurgy)[SPI.NANO] Engineering Sciences [physics]/Micro and nanotechnologies/MicroelectronicsAnalytical chemistrychemistry.chemical_elementBioengineering02 engineering and technology[SPI.MAT] Engineering Sciences [physics]/Materials01 natural sciencesNanoclusters[SPI.MAT]Engineering Sciences [physics]/Materials0103 physical sciencesGeneral Materials ScienceElectrical and Electronic Engineering[SPI.NANO]Engineering Sciences [physics]/Micro and nanotechnologies/MicroelectronicsHigh-resolution transmission electron microscopySilicon oxideComputingMilieux_MISCELLANEOUS010302 applied physicsMechanical EngineeringX-ray absorption spectroscopyEr ionsGeneral Chemistry021001 nanoscience & nanotechnology[PHYS.COND.CM-MS] Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Amorphous solidchemistryMechanics of MaterialsEnergy transfer[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci][SPI.OPTI]Engineering Sciences [physics]/Optics / Photonicphotoluminescence0210 nano-technology
researchProduct

Decorated pottery study: Analysis of pigments by x-ray absorbance spectroscopy measurements

2007

Characterization of pigments on decorated pottery fragments has been fully carried out by nondestructive x-ray absorbance spectroscopy (XAS). The samples were a series of pottery shards excavated from the archeological site of Caltagirone (Sicily, Italy), a well-known ceramic production center. Aesthetical criteria and morphological observations allowed us to attribute the samples to quite different historical periods, starting from the 18th century B.C. up to the 16th century A.D. An extensive time interval led us to suppose that different materials and techniques were used for the production of the ceramic paste and also for the preparation of pigments. XAS measurements were performed at …

ABSORPTION FINE-STRUCTUREX-ray absorption spectroscopyMaterials scienceExtended X-ray absorption fine structureAbsorption spectroscopyIDENTIFICATIONXASXAFSx-ray absorbance spectroscopy; XANES; EXAFS; pottery shardsXRFAnalytical chemistryGeneral Physics and AstronomyCOPPERXANESEXAFS XANES pigment potterypigmentvisual_artvisual_art.visual_art_mediumpigment; XRF; XASPotteryCeramicAbsorption (electromagnetic radiation)SpectroscopyRAMAN MICROSCOPY
researchProduct

A new cell for the study of in situ chemical reactions using X-ray absorption spectroscopy

2005

An in situ cell for reductive and oxidative treatments at different temperatures that allows the possibility of recording data as a function of temperature has been designed and constructed for X-ray absorption experiments at the GILDA beamline BM08 of ESRF. The cell is linked to a mass quadrupole spectrometer providing control of the reaction gases and monitoring of the products. The apparatus allows measurements to be performed both in transmission and fluorescence geometry. The cell was tested by studying the CO oxidation reaction promoted by a Pt/ceria-zirconia-supported catalyst. The CO(2) yield is correlated with the structural results confirming the existence of a strong metal-suppor…

In situNuclear and High Energy PhysicsAnalytical chemistryChemical reactionRedoxCatalysisSpecimen HandlingCatalysisthree-way catalystX-Ray DiffractionAbsorption (electromagnetic radiation)InstrumentationPlatinumX-ray absorption spectroscopyRadiationSpectrometerChemistryTemperatureSpectrometry X-Ray EmissionCarbon Dioxidein situ EXAFSOxygenYield (chemistry)Flow Injection AnalysisZirconiumOxidation-Reductionstrong metal support interaction
researchProduct

Treatment of grazing-incidence small-angle X-ray scattering data taken above the critical angle

2001

The equations taking into account refraction at the sample surface in grazing-incidence small-angle X-ray scattering (GISAXS) when the angle between the incoming beam and the sample surface is slightly larger than the critical angle are derived and discussed. It is demonstrated that the refraction of both the incoming and the scattered beam at the sample surface affects the GISAXS pattern and that, when a planar bidimensional detector perpendicular to the incoming beam is used, the effect depends on the azimuthal detector angle. The smearing of the pattern depending on the size of the illuminated sample area in grazing incidence is estimated by simulations with Cauchy functions of different…

DiffractionTotal internal reflectionsmall angle scatteringbusiness.industryScatteringChemistrynanoclustersPhysics::OpticsRefractionGeneral Biochemistry Genetics and Molecular BiologyAzimuthOpticsgrazing incidenceGrazing-incidence small-angle scatteringion implantationgrazing incidence; small angle scattering; nanoclusters; ion implantationSmall-angle scatteringbusinessBeam (structure)
researchProduct

On the use of grazing-incidence small-angle X-ray scattering (GISAXS) in the morphological study of ion-implanted materials.

2004

Grazing-incidence small-angle X-ray scattering has become a widely used technique for the morphological analysis of surface systems. Here it is show how this technique can be applied to a buried system, like metallic clusters in glass obtained by ion implantation. The optimization of the data-collection geometry is described as well as the details of the quantitative data analysis. An experimental example on Cu + Au-implanted glasses shows the potentiality of the technique.

Nuclear and High Energy PhysicsRadiationAmorphous metalMaterials sciencebusiness.industryScatteringSmall-angle X-ray scatteringSynchrotron radiationSmall-angle neutron scatteringIonOpticsIon implantationGrazing-incidence small-angle scatteringIon implantation Surface plasmon resonance third-order opticalbusinessInstrumentationJournal of synchrotron radiation
researchProduct

Effects of heat treatments on the properties of copper phthalocyanine films deposited by glow-discharge-induced sublimation

2006

Copper phthalocyanine films have been deposited by glow-discharge-induced sublimation. The films have undergone postdeposition heat treatments in air at 250 and 290 °C for different times, ranging from 30 min to 14 h. The properties of as-deposited and heated films have been investigated by different techniques in order to determine the effects of heat treatments on the film properties. Fourier transform infrared analysis and UV−visible optical absorption analysis point out a gradual evolution of the film structure from a mixture of α and β polymorphs to the only β polymorph in the sample heated at 290 °C for 14 h. A pronounced decrease of carbon and nitrogen atomic percentages against an o…

Materials Chemistry2506 Metals and Alloysgas sensingGlow dischargeMaterials sciencephthalocyanine EXAFSIon beamAbsorption spectroscopyGeneral Chemical EngineeringAnalytical chemistryAmbientaleGeneral ChemistryRutherford backscattering spectrometryNO2 detectionx-ray absorption spectroscpy; gas sensing; thin films; NO2 detectionX-ray photoelectron spectroscopythin filmsMaterials Chemistry2506 Metals and Alloys; Materials Science (all)Nuclear reaction analysisMaterials Chemistryx-ray absorption spectroscpySublimation (phase transition)Materials Science (all)Thin film
researchProduct