Experimental determination of viscous damper parameters in low velocity ranges

2017

In the last decades many strategies for seismic vulnerability mitigation of structures have been developed through analytical studies and experimental tests. Among these, energy dissipation by external devices assumes a great relevance for the relative design simplicity, even if applied to complex structures, and the effectiveness in reducing seismic demand. In particular, the use of fluid viscous dampers represents a very attractive solution because of their velocity-dependent behaviour and relatively low costs. The application on structures requires specific study under seismic excitation and a particular care of structural details. In this context the use of proper constitutive models fo…

Influenza della protezione sulla struttura dei popolamenti algali dell’AMP “Isola di Ustica”, un caso di studio.

2008

Benthic megafauna distribution in two different algal assemblages of the Ustica Island rocky infralittoral (NW Mediterranean)

2011

Habitat effect on distribution and feeding of Ophidiaster ophidianus (Lmk.) (Asteroidea)

2016

The purple starfish Ophidiaster ophidianus is an Atlanto-Mediterranean starfish protected under the EU’s Habitats Directive. Despite the wide distribution and the current range expansion of this warm affinity species in the northern Mediterranean areas, nothing is known about its diet. Using field observations and carbon (δ13C) and nitrogen (δ15N) stable isotopes, we explored possible changes in density and diet of O. ophidianus in relation to two different Mediterranean habitats: the coralline barren and the macro algae forest. Data were collected at the Marine Protected Area of Ustica Island (Southern Tyrrhenian Sea) from June to September 2009. Starfish density was not affected by the ha…

Definition of a fiber macro-model for nonlinear analysis of infilled frames

2017

A common way to model infill-frame interaction is the use equivalent strut macromodels. In most cases these are compression only resistant truss elements defined with a multi-linear axial-force / axial-displacement law. The main difficulty in using this approach is to correctly calibrate such a force-displacement curve (slope of ascending and post-peak branches, critical yielding, peak and residual forces) because of the large number of variables (mechanical and elastic properties of materials) and the different possible damage mechanisms activated for the frame-infill system. Another possible way is using fiber-section elements as diagonal struts. In this case the force-displacement law is…

Effetti del comportamento di Thalassoma pavo sul successo predatorio di Marthasterias glacialis

2011

A semi-empirical stress-strain model for equivalent strut fiber-section modeling of infilled frames

2017

Infill-frame interaction is commonly modeled by means of equivalent strut macro-models. The main difficulty in using this phenomenological approach is to properly calibrate a force-displacement curve for the struts, as this depends not only on the geometrical and mechanical properties, but more specifically on the different potential damage mechanisms which may occur for the infill-frame system subject to lateral forces. If fiber-section elements are used as diagonal struts, the force-displacement curve is substituted by a stress-strain law. In both cases, the attribution of the inelastic law of the struts, based on a mechanical approaches, is not valid in general, as mechanical approaches …

Frictional effects in structural behavior of no-end-connected steel-jacketed RC columns: Experimental results and new approaches to model numerical a…

2017

Steel jacketing of reinforced concrete (RC) columns is a common retrofitting technique used to restore bearing and deformation capacity of buildings presenting structural deficiencies. For practical reasons, steel angles are in several cases arranged leaving a gap with the end beams or slabs. Despite this disconnection, the angles are still able to support a non-negligible portion of load because of the frictional forces developed along the column-angle contact interface. In these cases, the definition of computational numerical and analytical models for the assessment of reinforced cross sections becomes more complex and must be handled with care. The actual load-carrying capacity of the a…

Macroelement Model for In-Plane and Out-of-Plane Responses of Masonry Infills in Frame Structures

2018

A new macroelement model is presented in this paper for the simulation of the in-plane (IP) and out-of-plane (OOP) response of infilled frames subjected to seismic actions. The model consists of two diagonal, one horizontal, and one vertical struts. Each strut is represented by two fiber-section beam-column elements. The model is able to capture the arching action of the wall under an OOP load as well as the interaction between the IP and OOP actions. The proposed modeling approach is sufficiently simple and efficient that it can be used for the static or dynamic analysis of an entire structural system. An experimental validation has been carried out. A further numerical study performed wit…

New body metrics to determine asteroid size and weight directly in the field

2015

Asteroids are an important group of predators in many marine ecosystems. The measure of body size is crucial in studying asteroid biology as this variable affects both prey selection and predation impact. Current field techniques for estimating asteroid size (i.e. total length TL, total weight TW) include the measure of correlated variables, such us the central disk (CD) and arm length (AL). However, these variables are often time-consuming and require a direct handling of the organism. We tested the accuracy of new asteroid body metrics, the arm height (AH) or arm width (AW), to rapidly estimate body size in asteroids. AH and AW were measured in three of the most common Mediterranean aster…

Evaluation of infilled frames: an updated in-plane-stiffness macro-model considering the effects of vertical loads

2015

The influence of masonry infills on the in-plane behaviour of RC framed structures is a central topic in the seismic evaluation and retrofitting of existing buildings. Many models in the literature use an equivalent strut member in order to represent the infill but, among the parameters influencing the equivalent strut behaviour, the effect of vertical loads acting on the frames is recognized but not quantified. Nevertheless a vertical load causes a non-negligible variation in the in-plane behaviour of infilled frames by influencing the effective volume of the infill. This results in a change in the stiffness and strength of the system. This paper presents an equivalent diagonal pin-jointed…

Macroelement Model for the Progressive-Collapse Analysis of Infilled Frames

2021

A new multistrut macromodel for the analysis of the progressive-collapse response of infilled reinforced concrete (RC) frames is presented in this paper. The model consists of three struts: two outer infinitely rigid and resistant struts and one inner fiber-section strut. The inclination of the struts as well as the stress-strain response are modulated by two parameters that are obtained by means of analytical correlations provided in the paper. The latter link the geometric and mechanical properties of an infilled frame to the geometric configuration and mechanical response of the equivalent strut model. This confers the model the capability to adapt to consider different collapse configur…

Size-dependent predation of the mesopredator Marthasterias glacialis (L.) (Asteroidea)

2016

Asteroids are largely recognized as important predators in all of the world’s oceans and for this reason, they play a crucial role in shaping the structure and functioning of benthic ecosystems. The spiny starfish Marthasterias glacialis is generally considered a voracious predator of molluscs, in particular bivalves. Using field observations and carbon (δ13C) and nitrogen (δ15N) stable isotopes, we explored possible changes in diet in relation to size of M. glacialis. Data were collected at Ustica Island (Southern Tyrrhenian Sea) from June 2008 to June 2010. M. glacialis showed a size shift in feeding preferences due to different use of food items: bivalves, Columbella rustica, Euthria cor…

Comunità, storia e religione tra Dilthey e il giovane Hegel

Full scale tests of the base-isolation system for an emergency hospital

2019

The paper presents the results of some full-scale tests regarding the base-isolation system of the emergency room building of the polyclinic hospital in Palermo (Italy). This building has been recently realized and its base isolation system is characterized by double friction pendulum isolators. Static lateral pushing tests were aimed at identifying fundamental mechanical properties of the whole isolation level (e.g. friction forces and stiffness) in order to verify the agreement with the design hypotheses. Further dynamic tests provided different displacements of the isolated base followed by the instantaneous release (snap-back tests), in order to verify the effectiveness, the mechanical …

Role of two co-occurring Mediterranean sea urchins in the formation of barren from Cystoseira canopy

2015

Abstract In the Mediterranean Sea the co-occurring sea urchins Paracentrotus lividus and Arbacia lixula are usually considered to share the same ecological role in the formation of barren from Cystoseira canopy. However, their foraging ability may vary due to feeding behavior and species-specific morphological traits. The relative effects of P. lividus and A. lixula on Cystoseira canopy was tested experimentally both in the laboratory, at a density of about 20 ind./m 2 , and in the field by gut content analysis. Field and laboratory results show that A. lixula is unable to affect Cystoseira spp. Furthermore, these results confirmed the great ability of P. lividus to consume Cystoseira canop…

MODELLING IN-PLANE AND OUT-OF-PLANE RESPONSE OF INFILLED FRAMES THROUGH A FIBER MACRO-MODEL

2017

A new fiber macro-model for the simulation of combined in-plane and out-of plane response of infilled frames subjected to seismic actions is presented in the paper. The model consists of 4 pinned struts (two diagonals, one horizontal and one vertical) modeled with the nonlinear beam/column fiber-section elements available in OpenSees. The model is particularly suitable to predict the out-of-plane response as fiber-section elements can account for the coupling between axial load and bending moment occurring because of the arching mechanism developed by the infills beyond the first cracking. Moreover the model can account for the effect of the reciprocal damaging accumulated both in-plane and…

Definition of diagonal Poisson's ratio and elastic modulus for infill masonry walls

2014

The prediction of the response of infilled frames through the simplified approach of substituting the infill with an equivalent pin-jointed strut is treated. In this framework the results of an experimental study for the mechanical characterization of different types of masonry infills having the aim of estimating strength, Young modulus and Poisson's ratio are presented. Four types of masonry were investigated and subjected to ordinary compressive tests orthogonally to the mortar beds and along the directions of the mortar beds. The experimental campaign confirmed the possibility of using an orthotropic plate model for prediction of the Poisson's ratio and Young modulus along the diagonal …

Traditional vs. sliding-joint masonry infilled frames: Seismic reliability and EAL

2020

Abstract In reinforced concrete (RC) multi-storey buildings, the important role of the seismic interaction of structural frames with masonry infills has been revealed by several earthquakes and investigated by many authors. Recently, several innovative infill solutions have been proposed to mitigate such interaction, which could result in widespread damage in both the masonry and the RC structure and sometimes jeopardize the building stability and the occupants’ safety. One solution consists in the partitioning of the masonry infill into several sub-panels, relatively sliding along specific joints. This paper investigates the seismic assessment of this technological solution in the framewor…

Prediction of the out-of-plane response of infilled frames under seismic loads by a new fiber-section macro-model

2016

This chapter suggests that an extension of the capability of the traditional inplane macro-models to capture the simultaneous in-plane and Out-Of-Plane (OOP) response of infills. A new simplified macro-model for the assessment of both in plane and out-of-plane responses of infilled frames was developed and validated. The possibility to simulate the arching action is achieved by using distributed plasticity fiber-section elements, able to directly account for the coupling between axial load and bending moment. The arching action is explicitly introduced by the use of fiber-section beam-column elements, which can model the coupling between axial-load and bending moment. The model presented is…

Numerical modelling of out-of-plane response of infilled frames: State of the art and future challenges for the equivalent strut macromodels

2017

Abstract Infill-frame interaction constitutes a still open question both in research and in practicing engineering. Computational models used to predict this interaction are, in most cases, addressing the estimation of the response of the infilled frames when subjected to actions parallel to their plane. However, the observation of the post-earthquake damage has demonstrated that infills, weakened by the in-plane actions, may fail out-of-plane increasing the risks associated to the earthquake scenarios. In spite of this, different studies have shown that infills, if properly designed and supported by the frame, exhibit a significant strength and displacement capacity when called to resist t…

A simplified method for ductility calculation in RC jacketed columns

2015

Reinforced concrete (RC) jacketing is a common method to retrofit existing columns with poor structural performance. It can be applied in two different ways: if the continuity of the jacket is ensured, the axial load of the column can be transferred to the jacket, which will be directly loaded; conversely, if no continuity is provided, the jacket induces only confinement action. In both cases the strength and ductility evaluation is rather complex, due to the different physical phenomena included, such as confinement, composite action core-jacket, preload, buckling of longitudinal bars. Although different theoretical studies have been carried out to calculate the confinement effects, a prac…

Shear and flexural strength of corroded R.C. beams

2016

Simplified equations aimed at evaluating the flexural and shear capacity of corroded R.C. beams are presented and discussed in this paper, with reference to ordinary beams reinforced both longitudinally (with same-size bars) and transversely (with stirrups). A model is developed to take care of diffused and localised corrosion (pitting corrosion), concrete decay in compression and bond-strength decay at concrete-reinforcement interface. A fairly innovative contribution of this study is the introduction into the proposed equations of the main parameters governing the corrosion processes. The proposed approach is simple and effective, and may be adopted in the assessment of many damaged struc…

Analysis of local shear effects in brick masonry infilled RC frames

2013

Masonry infills panels placed among framed structures meshes have a relevant influence in presence seismic actions in terms of strength stiffness and global displacement capacity. In the case of RC structures, the modifications of internal forces due to infill-frame interaction may be not compatible with surrounding frame members strength especially considering additional shear forces arising at the ends of beams and columns in contact with the panel under lateral actions. Such effects may be in many cases the cause of unexpected brittle collapse mechanisms which compromise the safety of the entire structure. In this paper by means of a double (micromodeling and macromodeling) procedure reg…