Analysis of Protected Accidental Transients in the EFIT Reactor With the RELAP5 Thermal-Hydraulic Code

The European Facility for Industrial Transmutation (EFIT) is aimed at demonstrating the feasibility of transmutation process through the Accelerator Driven System (ADS) route on an industrial scale. The conceptual design of this reactor of about 400 MW thermal power is under development in the frame of the European EUROTRANS Integrated Project of the EURATOM Sixth Framework Program (FP6). EFIT is a pool-type reactor cooled by forced circulation of lead in the primary system where the heat is removed by steam generators installed inside the reactor vessel. The reactor power is sustained by a spallation neutron source supplied by a proton beam impinging on a lead target at the core centre. A …

Updated design and integration of the ancillary circuits for the European Test Blanket Systems

The validation of the key technologies relevant for a DEMO Breeding Blanket is one of the main objectives of the design and operation of the Test Blanket Systems (TBS) in ITER. In compliance with the main features and technical requirements of the parent breeding blanket concepts, the European TBM Project is developing the HCLL (Helium Cooled Lithium Lead) and HCPB (Helium Cooled Pebble Bed)-TBS, focusing in this phase on the design life cycle and on R&D activities in support of the design. The TBS ancillary systems are mainly circuits devoted to the removal of thermal power and to the extraction and recovery of the tritium generated in the Test Blanket Modules. They are: • The Helium C…

Preliminary T/H and Transient Analyses for EFIT Reactor design

Decay Heat Removal and Transient Analysis in Accidental Conditions in the EFIT Reactor

The development of a conceptual design of an industrial-scale transmutation facility (EFIT) of several 100 MW thermal power based on accelerator-driven system (ADS) is addressed in the frame of the European EUROTRANS Integral Project. In normal operation, the core power of EFIT reactor is removed through steam generators by four secondary loops fed by water. A safety-related decay heat removal (DHR) system provided with four independent inherently safe loops is installed in the primary vessel to remove the decay heat by natural convection circulation under accidental conditions which are caused by a loss-of-heat sink (LOHS). In order to confirm the adequacy of the adopted solution for decay…