0000000000253929

AUTHOR

Dorina Ines Donato

Modelling small angle neutron scattering data from polymers in supercritical fluids

In this paper we report a SANS investigation of micelle formation by fluorocarbon-hydrocarbon block copolymers in supercritical CO2(scCO2) at 313K. A sharp unimer-micelle transition is obtained due to the tuning of the solvating ability of scCO2 by profiling pressure. At high pressure the copolymer is in a monomeric state with a random coil structure. By lowering the pressure aggregates are formed with the hydrocarbon segments forming the core and the fluorocarbon segments forming the corona of spherical aggregates. This aggregate-unimer transition is driven by the gradual penetration of CO2 molecules toward the core of the aggregate and is critically related to the density of the solvent, …

research product

Ceremonial customs of Greek age (5th Century, bC) in Sicily: a study by GC-MS of some fictile unguentaria from two necropolises

research product

SAXS investigation on aggregation phenomena in supercritical CO2.

Synchrotron Small-Angle X-Ray scattering (SAXS) measurements on aggregate formation of a Polyvinyl acetate- b-Perfluoro octyl acrylate (PVAc- b-PFOA) block copolymer in supercritical CO(2) are here reported. Experiments were carried out for a series of different thermodynamic conditions, changing the solvent density by profiling both the pressure at constant temperature and the temperature at constant pressure. This block copolymer and in general fluorocarbon-hydrocarbon di-blocks form aggregates depending on the value of CO(2) density. A sharp transition between monomers dissolved as random coils and micelles characterized by a solvophilic shell and a solvophobic core occurs when the CO(2)…

research product

La polimerizzazione dell'isoeugenolo per il consolidamento dei legni: Caratterizzazioni fisiche ed indagini SEM-EDS su campioni provenienti da reperti differenti per taxon e degrado

research product

Consolidamento di legni degradati tramite polimerizzazione in situ di isoeugenolo

research product

Polimerizzazione in situ per il consolidamento di materiali lignei

research product

POROSITY DETERMINATION WITH HELIUM PYCNOMETRY AS A METHOD TO CHARACTERIZE WATERLOGGED WOODS AND THE EFFICACY OF THE CONSERVATION TREATMENTS

research product

Molecular association in water-isomeric pentanol mixtures at 25�C

The results of static dielectric constant and viscosity measurements on solutions of water (concentration range 0 to 0.3 mole fraction) in 2-pentanol, 3-pentanol, 2-methyl-1-butanol, 3-methyl-1-butanol, and 2-methyl-2-butanol together with previous results for solutions of water in n-pentanol are discussed in terms of the information that they provide on the nature and the extent of molecular association in these solutions. We conclude that in most systems this association leads to the formation of tetrahedral complexes such as H2O(ROH)4. Evidences of the correlation of water-alcohol interactions with molecular parameters (position of OH group, steric hindrance of alkyl chain) of alcohols a…

research product

NMR di materiali lapidei e di legni archeologici

research product

Studi preliminari mediante MRR e MRI su legni bagnati d'interesse archeologico

research product

Dilute and semi dilute solutions of block copolymers in water, near-critical and super-critical CO2: a small angle scattering study of the monomer–aggregate transition

Abstract Small angle neutron (SANS) and X-ray (SAXS) Scattering measurements on aggregate formation of block copolymers in water and in near-critical and supercritical CO2 are reported here. Time Resolved SAXS (TR-SAXS) has also been performed in the supercritical region. Experiments have been carried out for a series of different thermodynamic conditions, changing the solvent density by profiling the pressure at constant temperature. A sharp transition between monomers dissolved as random coils and micelles characterized by a solvo-philic shell and a solvo-phobic core occurs when the solvent density reaches the critical micellization value. This is easily shown in the case of scCO2.

research product

Composti polimerici per il consolidamento di legni degradati

research product

Strengthening of waterlogged wood. Impregnation and polymerization within the wood EMA/MA and AIBN.

research product

Trattamenti a plasma per la protezione di manufatti lignei.

research product

Applied neutron tomography in modern archaelogy

The use of neutron tomography for archaeometric purposes is quite a new technique. The property of neutron to transmit easily large, dense samples is of great importance in modern archaeology. The three-dimensional visualisation of the inner structure of samples of archaeological interest helps to make suggestions about the technological process of manufacturing or reveals information about the origins of delivering of noble materials used in ancient masterpieces. Another application field in modern archaeology is the non-destructive inspection of the quality of specimen conservation where the neutron tomography allows visualization of impregnation solutions in wood or metal matrices. The h…

research product

Conductance in homomorphous solvents: Tetrabutylammonium salts and alkali picrates in butyrolactone-sulfolane mixtures

Conductance measurements are reported for LiPi, NaPi, KPi, RbPi, CsPi, Bu4NPi, Bu4NBr, Bu4NClO4, Bu4NNO3, and Bu4NBBu4 at 25°C in γ-butyrolactone-sulfolane mixtures. In these mixtures of solvents that are practically homomorphous, isodielectic and with comparable dipole moments, the ion pair association and ionic mobilities of large ions conform to the expectations of the primitive model. Electrolytes containing lithium or sodium ions show anomalies indicating that other factors besides shape, dipole moment, and polarizability of the solvent molecules are involved in the association and transport processes of these ions.

research product

Wood coated with plasma-polymer for water repellence

The effects of cold HMDSO and HMDSO + SF6 plasma treatments on spruce, chestnut and poplar wood were investigated in order to obtain a hydrophobic surface evaluated by microscopic, spectroscopic (FT-IR and LIBS) and contact angle analyses. Cold plasma treatments can increase the surface hydro-repellence without modifying the external aspect and bulk properties of different woods.

research product

Consolidamento con polimeri di reperti lignei provenienti da siti sommersi

research product

The static dielectric constant of solutions of water inn-alcohols at 15, 25, 35, and 45°C

Dielectric constants (measured at 1 MHz) are reported for solutions of water (concentration range 0 to 0.2 mole fraction) in 1-propanol at 25°C, and in 1-butanol, 1-pentanol, and 1-hexanol at 15, 25, 35, and 45°C. These results, together with literature values for solutions of water in methanol, ethanol, 1-heptanol, and 1-octanol, show that water interacts with alcohols in at least two ways: (1) it can participate in the formation of dynamic hydrogen-bonded chains, thereby raising the polarizability; (2) it can form relatively stable structures such as H2O(ROH)4 which have zero net dipole moment and consequently diminish volume polarizability. For C n H 2n+1 OH alcohols,n≥4, most of the ini…

research product

Moisture absorption, thermal conductivity and noise mitigation of clay based plasters: The influence of mineralogical and textural characteristics

Abstract Three pre-mixed clay based plasters successfully employed in green building practices in several European countries (Spain, France, Germany, and United Kingdom), mainly used for interior wall coating and finishing, were tested in this paper. Their compositional and textural characteristics as well as plastic behaviour were investigated through a multi-analytical approach in a previous paper. A natural earth (Terra Rossa red soil sampled in north-western Sicily), theoretically appropriate for the production of earthen plaster, was also subjected to the same analytical routine and compared with the three commercially available products. Humidity control capacity by the determination …

research product

Determining the selective impregnation of waterlogged archaeological woods with poly(ethylene) glycols mixtures by differential scanning calorimetry

The differential scanning calorimetry (DSC) technique was demonstrated to be a reliable and fast tool for the investigation of the selective impregnation of archaeological woods with poly(ethylene) glycols (PEGs) mixtures. To this aim, waterlogged archaeological woods were impregnated by using aqueous mixtures of PEG 4000 and PEG 400 as well as mixtures of these polymers in the melt state. The efficiency of the treatments was also estimated by determining the total consolidant content entrapped into the cavities of degraded wood by means of DSC and thermogravimetry.

research product

Preliminary studies on treated waterlogged wood by low field NMR spectroscopy

research product

A comparative thermogravimetric study of waterlogged archaeological and sound woods

Waterlogged archaeological woods Pinus pinaster and Fagus sylvatica L. were analyzed by using TG technique. Degradation processes ascribable to the holocellulose decay were evidenced at nearly the same temperature for sound and archaeological samples. The residual matters at 600 and 900 °C of the sound woods are much lower than those of archaeological waterlogged woods in agreement with the presence of inorganic materials encapsulated during the burial into the marine environment. It was proposed a new protocol to rapidly calculate the maximum water content parameter, which is related to the wood degradation state. TG experiments at variable heating rates were performed to obtain kinetic pa…

research product

Interactions in water-alcohol mixtures: Conductance of lithium picrate in solutions of water and isomeric pentanols at 25�C

Conductance measurements of lithium picrate in solutions of water in n-pentanol, 2-pentanol, 3-pentanol, 2-methyl-1-butanol and 3-methyl-1-butanol have been carried out at 25°C. Ionic association and conductance were found to change with water content and with the molecular structure of the alcohols (i.e. position of the OH group and degree of branching of the alkyl chain). These results indicate that both conductance and ion pair formation are not the consequence of the simple motion of ions in the electrical field as required by the continuum model. A more realistic approach, involving the internal structure of the solvent mixtures, has been considered.

research product

Application of Neutron Techniques in Archaeometry

research product

Thermodynamics of binary mixtures: Volumes, heat capacities, and dilution enthalpies for then-pentanol+2-methyl-2-butanol system

The densities, heat capacities, and dilution enthalpies ofn-pentanol+2-methyl-2-butanol mixtures have been measured, in many cases as a function of temperature, over the complete mole fraction range. Excesses thermodynamic properties, apparent and partial molar heat capacities, volumes and expansibilities were derived. The concentration and temperature dependences of these functions are discussed in terms of the variations of the structure of the system caused by the participation of the two alcohol molecules (with quite different steric hindrance of the alkyl chain around the-OH group) in the dynamic intermolecular association process through hydrogen bonding.

research product

Static dielectric constant, viscosity, and structure of pure isomeric pentanols

Static dielectric constants, viscosities, densitites and refractive indices of 2-pentanol, 3-pentanol, 2-methyl-1-butanol, 3-methyl-1-butanol and 2-methyl-2-butanol were measured at 15, 25, 35 and 45°C. These results together with the previous data on n-pentanol have been analyzed in terms of the Kirkwood correlation factor g k and of the energy of activiation for viscous flow. With the exception of 2-methyl-2-butanol, g k was found to be greater than unity. These results show that the monomeric units of isomeric pentanols interact by means of hydrogen bonding to form dynamic structures essentially of two types: linear chains where co-association raises the total polarizability and cyclic d…

research product

Consolidamento di reperti lignei con metodiche innovative. Studi per la valutazione dell'impatto ambientale

research product

Physical properties of waterlogged wood. Measurements with Accupyc 1330, Helium pycnometer

research product

Polimerizzazione in situ per il consolidamento di materiali lignei attraverso tecniche ambientalmente compatibili.

research product

Preliminary 1H NMR studyon waterlogged wood strengthened with Klucel

Waterlogged woods from sea or lakes are very fragile because chemical, physical and biological decay. Wood artefacts, if directly dried in air, risk a structurally collapse and loss original form and dimension. The progressive substitution of water with suitable strengthening materials can preserve the characteristic of the wood finds. Among various natural and synthetic polymers suitable for this porpoise we have chosen aqueous solutions of Klucel (hydroxypropylcellulose), a polymer obtained from etherification of cellulose. This compound can interact with all the components of the wooden structure (cellulose, hemicellulose and lignin) and can cover the cavities by a protective and stabili…

research product

Processo di invecchiamento chimico dei legni: verifica dell'efficacia del trattamento da misure di densità

research product

Materiali e metodi utilizzati nel consolidamento dei legni umidi ed applicabili alla conservazione dei tessuti e delle fibre

research product

Consolidation of waterlogged woods by in-situ polymerisation of isoeugenol

research product

Thermogravimetric analysis. A tool to evaluate the ability of mixtures in consolidating waterlogged archaeological woods

Waterlogged archaeological woods (Pinus pinaster, Ulmus cf. minor and Fagus sylvatica L.) were consolidated by using Colophony, Rosin 100, and a mixture of Poly(ethylene) glycol (PEG) 3000 and Poly(propylene) glycol (PPG) 425. The efficiency of the consolidants was estimated by determining the content entrapped into the cavity of degraded wood. For this purpose, thermogravimetry was demonstrated to be a reliable tool. In the case that the polymeric mixture was used for impregnation, it was also possible to discriminate the amount of PEG 3000 from that of PPG 425 captured by the wood capillaries. Regardless of the wood nature, all the consolidants were present in treated samples in large amo…

research product

Legni archeologici bagnati. Valutazione dello stato di degrado mediante misure di porosità

research product

1H MRI study on waterlogged wood streghtened with Klucel

research product