0000000000267527
AUTHOR
Niwut Juntavee
showing 9 related works from this author
Role of coefficient of thermal expansion on bond strength of ceramic veneered yttrium-stabilized zirconia
2017
Background Incompatible coefficient of thermal expansion (CTE) is supposed to be a reason for chipping of ceramic veneered zirconia. This study evaluates the effect of veneering ceramic at varied CTE on bond strength to zirconia. Material and Methods Zirconia disks (Z, O 10 mm, 1.0 mm thickness) were prepared from Y-TZP (Cercon®) and sintered at 1350°C for 6 hours. All zirconia disks were veneered with ceramics ((O 7.0 mm, 1.5 mm thickness) with varied CTE including VITADur® alpha (VDα), VITAVM®7 (VM7), VITAVM®9 (VM9), Cercon® ceramkiss (CCK), IPSe.max® ceram (IeC), and IPS dSIGN® (IdS) (n=15). The specimens were thermo-cycled (5-55 °C, 500 cycles) prior to determine the shear bond strength…
Effect of different sintering process on flexural strength of translucency monolithic zirconia
2018
Background Sintering process is responsible for the strength of zirconia restoration. This study evaluated the effect of different sintering temperatures and sintered-holding times on flexural strength of translucency monolithic zirconia. Material and Methods One hundred and thirty five zirconia bar specimens (width-length-thickness = 10×20×1.5 mm) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic and randomly divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintered-holding times [shortening- (HS, 60 min), regular- (HR, …
Influence of different veneering techniques and thermal tempering on flexural strength of ceramic veneered yttria partially stabilized tetragonal zir…
2019
Background Different technique for ceramic veneering and thermal tempering process are expected to be a reason for alteration in strength of ceramic veneered zirconia. This study evaluates the effect of different veneering technique and varied thermal tempering process on flexural strength of ceramic veneered zirconia. Material and Methods Ceramic veneered zirconia bars (25 mm length, 4 mm width, 0.7&1.0mm of zirconia & ceramic thickness) were prepared from zirconia block (e.max® ZirCAD), sintered at 1500°C for 4 hours, and veneered with ceramics with different techniques including CAD-fused using e.max CAD® (C), Pressed-on using e.max® Zirpress (P), and layering using e.max® ceram (L), wit…
Shear bond strength of ceramic bracket bonded to different surface-treated ceramic materials
2018
Background This study evaluated the effect of ceramic surface treatments on bond strength of ceramic brackets to machine-able ceramics and ceramic veneering metal. Material and Methods Machined ceramic specimens (10x10x1.5 mm) were prepared from Empress® CAD (EP), and e.max® CAD (EM). Ceramic veneering metal specimens (PF) were fabricated from sintered d.Sign® porcelain (1.27 mm thickness) over d.Sign®10 metal (0.23 mm thickness). Each ceramic was divided into 3-groups and treated surface by Er-YAG laser (LE) or etching with 9.6% HF acid for 5 seconds (A5) or 15 seconds (A15). Resin adhesive (Transbond™-XT) was used for attaching ceramic brackets for each group (n=15) and cured with LED (Bl…
Shear bond strength of ceramic fused to CAD-CAM milled alloys
2018
Background This study evaluated the metal ceramic bond strength of cast Ni-Cr, cast Co-Cr, sintered Co-Cr and milled Co-Cr alloys to ceramic through two application procedures including the ceramic layering technique and ceramic pressed-on technique. Material and Methods Ceramic materials (Ø 8 mm, 1.5 mm thickness) were veneered by either the layering or pressed-on technique to cast Ni-Cr, cast Co-Cr, sintered Co-Cr and hard milled Co-Cr alloy disc (12 × 12 × 0.5 mm) (n=15). All specimens were treated with a thermal cycle process for 500 cycles at the temperature between 5 °C and 55 °C with immerse time of 30 seconds and 5 seconds for specimen transfer. The shear bond strength was determine…
Influence of thermal tempering processes on color characteristics of different monolithic computer-assisted design and computer-assisted manufacturin…
2019
Background The optical properties of dental restoration were influenced by the sintering parameters. This study investigated the effects of different tempering processes on optical properties of three monolithic Cad-Cam ceramics. Material and Methods 135 monolithic material bars (4 mm width, 14 mm length, 1.2 mm thickness) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (inCoris TZI, I), zirconia-reinforced lithium silicate (Vita Suprinity, V), and lithium disilicate glass (e.max CAD, E) ceramics, with different tempering processes through slow (S), normal (N), and fast (F) cooling (n=15). The color appearance (∆EW), translucency parameter (TP), contrast ratio (CR),…
Fracture toughness of different monolithic zirconia upon post-sintering processes
2021
Background Surface treatments are expected to be a reason for alteration in fracture resistance of zirconia. This study evaluated the effect of post-sintering processes on the fracture toughness of different types of monolithic zirconia. Material and Methods Classical- (Cz) and high-translucent (Hz) monolithic zirconia discs (1.2 mm thickness, 14 mm in Ø) were prepared, and randomly divided for surface treatments with 1) as-glazed (AG); 2) finished and polished (FP); 3) finished, polished, and overglazed (FPOG); and 4) finished, polished, and heat-treated (FPHT) technique (n=15/group). Fracture toughness (KIC) was determined with indentation fracture toughness method at load 1 kg for AG, FP…
Role of sintered temperature and sintering time on spectral translucence of nano-crystal monolithic zirconia
2018
Background Sintering process is accountable for aesthetic appearance of zirconia restoration. This study appraised the effect of different sintering procedure via sintered temperatures and sintering times on spectral translucence of monolithic zirconia. Material and Methods One hundred and thirty five monolithic zirconia specimens (width, length, thickness = 10, 20, 1.5 mm) were prepared from yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP, Ceramill®) and unintentionally divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintering times [shortening…
Effect of sintering process on color parameters of nano-sized yttria partially stabilized tetragonal monolithic zirconia
2018
Background Sintering process is responsible for aesthetic of zirconia restoration. This study evaluated the effect of different sintering temperatures and sintered-holding times on color parameters of monolithic zirconia. Material and Methods One hundred and thirty five zirconia bar specimens (width-length-thickness = 10×20×1.5 mm) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic and randomly divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintered-holding times [shortening- (HS, 60 min), regular- (HR, 120 min), and pro…