0000000000273591
AUTHOR
D. J. Yusá Marco
Study and dating of medieval ceramic tiles by analysis of enamels with atomic absorption spectroscopy, X-ray fluorescence and electron probe microanalysis
Abstract This paper reports an analytical study of enamel on fragments of medieval tiles using atomic spectroscopy techniques — AAS, XRF and SEM/EDX. The samples came from a hermitage in the region of Valencia (Spain) and have different motifs, mainly floral ones in a wide variety of colors. A study of the soluble salts in the biscuits and mortar was carried out using AAS to determine their present capacity to produce efflorescence and the type of efflorescence. XRF was used to identify the oxides responsible for the different colors and the pigments used over large areas of the tiles (white and green). SEM/EDX was used to characterize the white and green and smaller areas of other colors. …
Analytical Study of Raw Materials of Zinc Oxide Used for Enamels on Industrial Ceramics: Quantitative Analysis of Zinc, Lead, and Sulfur in These Samples by X‐ray Fluorescence and Flame Atomic Absorption Spectrometry
Abstract An analytical study is carried out to optimize X‐ray fluorescence (XRF) and flame atomic absorption spectrometry (FAAS) quantitative analysis of Zn, Pb, and S in ZnO samples commonly used to obtain industrial ceramic enamels. Pb and S in the raw materials often contaminate ZnO and are very detrimental in industrial applications. Thus, very accurate analytical determination of these elements in ceramic samples is extremely important. First of all, a mineralogical study by X‐ray diffraction (XRD) on the different components in these raw materials and the materials produced during the firing process is performed in order to establish the mineral forms in a reference sample for analysi…
Quantitative analysis of chromite ores using glass discs in moderate dilutions of lithium tetraborate by x-ray fluorescence spectrometry
A method for the quantitative analysis of chromite ores by x-ray fluorescence spectrometry using beads is proposed. The work concerned the serious problems caused by the refractory nature of these materials which prevents the use of glass discs in x-ray fluorescence. An in-depth study was done to optimise the variables which influence the glass disc formation process. Sufficiently homogeneous glass discs were obtained under the following experimental conditions: lithium tetraborate as flux with moderate sample dilution (1:40), with the addition of one or two drops of LiBr solution(250 g l−1), at a temperature of 1200 °C for 30 min. The qualitative and semiquantitative results for the chromi…