0000000000276997
AUTHOR
Janitha C. Bandara
Air gasification of wood chips, wood pellets and grass pellets in a bubbling fluidized bed reactor
Abstract Gasification is an attractive method for biomass-to-energy conversion and fluidized bed design is one of the best options for large scale operation. A bubbling fluidized bed reactor was used to analyze the effects of biomass type, equivalence ratio (ER) and temperature for product gas compositions. Wood chips, wood pellets and grass pellets were gasified between 650 °C and 800 °C temperature. The ER was varied between 0.08 and 0.16. Gasification of grass pellets was difficult at 800 °C due to agglomeration and the gas composition was poor compared to wood. The reactor performances improved over the temperature and 650 °C was not sufficient to achieve a reasonable carbon conversion.…
Circulating fluidized bed reactors – part 01: analyzing the effect of particle modelling parameters in computational particle fluid dynamic (CPFD) simulation with experimental validation
A CPFD hydrodynamic model was developed for a circulating fluidized bed system and the simulation results were validated against experimental data based on particle circulation rate. Sensitivity of the computational mesh was primarily tested and extended grid refinement was needed at the loopseal to match the particle circulation rate with experimental data. The particle circulation rate was independent of the range of number of computational particles used in this study. A 10% reduction of the particle circulation rate was observed as the particle-wall interaction parameter was changed from 0.85 to 0.55 and 17% increment when the close-packed volume fraction was changed from 0.56 to 0.62. …
Sensitivity Analysis and Effect of Simulation parameters of CPFD Simulation in Fluidized Beds
Fluidized bed technology is broadly applied in industry due to its distinct advantages. CFD simulation of fluidized beds is still challenging compared to single-phase systems and needs extensive validation. Multiphase particle-in-cell is a recently developed lagrangian modeling technique and this work is devoted to analyze the sensitivity of grid size, time step, and model parameters, which are the essences of accurate results. Barracuda VR 17.1.0 commercial CFD package was used in this study. 500µm sand particles and air was used as the bed material and fluidization gas respectively. Five different grids, having 27378, 22176, 16819, 9000 and 6656 computational cells were analysed, where fi…
Loop seals in circulating fluidized beds – Review and parametric studies using CPFD simulation
Abstract Loop seal is a robust particle recycling technique used in circulating fluidized bed (CFB) reactors. The rate and the location of the loop seal aeration exert a significant impact on the rate of particle circulation (GS). The standpipe balances the cumulative pressure drop across the rest of the CFB by adjusting its particle height or gas-particle slip velocity. Higher fraction of the loop seal aeration naturally flows down to riser. Increased pressure drop in the standpipe results in high rate of particle circulation. Computational-particle-fluid-dynamic (CPFD) code is customized for multiphase flow modelling. The inbuilt tool of “BC connectors” was incorporated to downsize a CFB …