Time-resolved XRD experiments for a fine description of mechanisms induced during reactive sintering

The control of Mechanically Activated Field Activated Pressure Assisted Synthesis hereafter called the MAFAPAS process is the main objective to be achieved for producing nanostructure materials with a controlled consolidation level. Consequently, it was essential to develop characterization tools "in situ" such as the Time Resolved X-ray Diffraction (TRXRD), with an X-ray synchrotron beam (H10, LURE Orsay) coupled to an infrared thermography to study simultaneously structural transformations and thermal evolutions. From the 2003 experiments, we took the opportunity to modify the sample-holder in order to reproduce the better synthesis conditions of the MAFAPAS process, but without the conso…

"Spark plasma synthesis from mechanically activated powders: a versatile route for producing dense nanostructured iron aluminides

Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activated powder mixtures

The preparation of highly dense bulk materials with a grain size in the range of a few to a few hundreds nanometers is currently the objective of numerous studies. In our research we have achieved a measure of success in this regard by using the methods of mechanically-activated, field-activated, pressure-assisted synthesis, MAFAPAS, which has been patented, and mechanically-activated spark plasma sintering, MASPS. Both methods, which consist of the combination of a mechanical activation step followed by a consolidation step under the simultaneous influence of an electric field and mechanical pressure, have led to the formation of dense nanostructured ceramics, intermetallics, and composite…

Investigation of MAFAPAS processing parameters for producing dense nanostructured FeAl

Electrochemical behavior of nanocrystalline iron aluminide obtained by mechanically activated field activated pressure assisted synthesis

Abstract The corrosion behavior of nanocrystalline iron aluminide obtained by mechanically activated field—activated pressure—assisted synthesis was investigated in sulphuric acid media using potentiodynamic curves. The effect of microstructure on the electrochemical corrosion resistance was investigated by examining samples which were heat treated to effect a change in crystallite size and microdistorsion.

Bulk FeAl nanostructured materials obtained by spray forming and spark plasma sintering

Abstract This paper examines the efficiency of two consolidation processing techniques high velocity oxy-fuel (HVOF) spray forming and spark plasma sintering (SPS) which allow to obtain bulk dense nanostructured materials. An oxide dispersion strengthened (ODS) Fe–40Al (at.%) based milled powder (with a nanostructure

Flexible and Modular Support for Multicast Rate Adaptation in WLANs

The flexibility and virtualization capabilities provided by wireless cards have received significant attention as a means to reduce development costs. In this paper we present a modular architecture that exploits the features provided by emerging PHY and MAC implementations to rapidly develop new rate adaptation algorithms for multicast trans- mission in wireless LANs. We validate our solution by developing three rate adapta- tion algorithms that use an innovative sensing mechanism to evaluate the frame recep- tion correlation of the members of the multicast group. The experimental results obtained on a real-life testbed show that our solutions permit to increase the performance of multicas…

Mechanical Activation as a New Method for SHS

The use of mechanical activation (the elemental powder mixture is milled for a short time at given frequency and impact energy) as a precursor to self-propagating high-temperature synthesis (SHS) results in the formation of nanostructured porous materials. The mechanical activation step was found necessary (i) to modify the thermal parameters of the combustion front (i.e. combustion front velocity, thermal heating rate…) in the cases of Mo-Si, Fe-Al, Ni-Si (ii) to initiate a combustion front in the case of systems having a low exothermicity. Nevertheless, the control of the mechanically activated mixture characteristics and, the understanding of the mechanical activation role on the SHS par…

Investigation of mechanically activated field-activated pressure-assisted synthesis processing parameters for producing dense nanostructured FeAl

The parameters of the mechanically activated field-activated pressure-assisted synthesis (MAFAPAS) process, which were recently developed and patented for producing dense nanostructured materials, were studied in the case of the B2-FeAl intermetallic. Based on x-ray diffraction (XRD) experiments, residual stresses XRD analysis, relative density measurement, and secondary-electron microscopic observations, the optimal synthesis conditions (time, current intensity, and pressure) were studied. Fe + Al powders were comilled in a specially designed planetary mill to obtain a mixture of reactants at the nanoscale without the formation of any product. The milled mixtures were then subjected to a h…

Microstructural study of titanium carbonitride elaborated by combustion synthesis

Abstract The self-propagating high-temperature synthesis (S.H.S.) process, which is promising for the fabrication of ceramic materials, was chosen to elaborate titanium carbonitride materials. The influence of parameters such as nitrogen gas pressure and carbon ratio on the microstructure was studied. A single phase product of Ti(C,N) is obtained for a carbon ratio under 15 at.% and a nitrogen pressure of 36 MPa. The increase of the carbon ratio corresponds to a decrease of the maximum temperature reached during the synthesis. Time resolved X-ray diffraction measurements (TRXRD) with the synchrotron radiation were used to determine the reaction mechanisms. We could observe that the synthesi…

Investigation of the SHS mechanisms of titanium nitride by in situ time-resolved diffraction and infrared thermography

Abstract The self-propagating high-temperature synthesis (SHS) or combustion synthesis is a promising process to produce advanced ceramics due to the high purity of the elaborated materials and the very short synthesis time. Titanium nitride has been synthesised from pressed titanium powder and a nitrogen gas flow under a 0.1 MPa pressure. The influence of the addition of a TiN diluent was investigated. For the first time, SHS reaction mechanisms were determined from in situ time-resolved X-ray diffraction (TRXRD) experiments using the synchrotron radiation. These experiments were coupled with infrared thermography to study the propagation of the combustion reaction. It appeared that the in…

Effect of Microstructure on the High Temperature Oxidation and Pesting Behaviour of MoSi<sub>2</sub>

Spark plasma synthesis from mechanically activated powders: a versatile route for producing dense nanostructured iron aluminides

Abstract The possibility of mechanically activated spark plasma sintering (MASPS) to perform simultaneously within a very short period of time the synthesis and the consolidation of nanophase iron aluminide from mechanically activated powders of Fe and Al in two different ratio (Fe53 at.% and Fe60 at.%) were confirmed in this work.