0000000000341677
AUTHOR
M. J. Marqués
Electrothermal Atomic Absorption Determination of Chromium in Sediments
Abstract An electrothermal atomic absorption spectrometric method has been developed to determine total chromium concentration in natural sediment samples. Samples were mineralized by dry ashing at 550°C and fused at 1100°C for 30 min with lithium metaborate. Dissolved samples were injected in graphite tubes, mineralized at 1100°C, and atomized at 2600°C. Standard addition calibration made unnecessary the use of chemical modifiers. The method provided a limit of detection from 23 to 45 ng liter −1 . The relative standard deviation for chromium determination was between 3 and 14%. Results obtained for a standard reference material agree well with the certified value. A series of natural samp…
Chromium speciation in liquid matrices: a survey of the literature
A thorough review of the literature published (1983 - March 1999) on chromium speciation in liquid samples is presented, and analytical techniques used in the 404 articles are summarized. The discussion focuses on atomic spectrometric techniques, which are mainly employed for chromium speciation in liquid matrices (134 articles). Details on the type of pretreatment, species, samples, techniques and analytical features of the methodologies proposed are given.
Analytical methodologies for chromium speciation in solid matrices: a survey of literature
The analytical literature about chromium speciation in solid samples has been surveyed. From 451 articles published on the speciation of chromium from 1983 to 1997, the methodologies to do speciation in solids after sample pretreatment are discussed, through consideration of the types of samples and their dissolution, the analytical techniques employed for chromium measurement, and the figures of merit of the 86 papers reported in the Analytical Abstracts data base.
Trace element determination in sediments: a comparative study between neutron activation analysis (NAA) and inductively coupled plasma-mass spectrometry (ICP-MS)
An inductively coupled plasma-mass spectrometry (ICP-MS) method has been employed for trace element determination in five real sediment samples and a standard reference material. These samples were mineralized by dry ashing at 550°C and fused at 1100°C for 30 min with lithium metaborate. Dissolved samples were measured by a semiquantitative methodology with external calibration and with Rh as an internal standard. More than 50 elements have been measured. As a reference technique, a direct analysis of the solid samples was carried out by neutron activation analysis. Results obtained by ICP-MS have been compared with those obtained by neutron activation analysis (NAA) by applying the paired …
Chromium speciation using activated alumina microcolumns and sequential injection analysis-flame atomic absorption spectrometry
Abstract A new procedure has been developed for chromium speciation in water by sequential injection analysis and flame atomic absorption spectrometry. The method involves the online retention of Cr(VI) anionic species and Cr(III) cationic species on alumina microcolumns, prepared by packing activated alumina in polytetrafluoroethylene tubes, followed by selective elution of Cr(VI) with 2 mol l −1 NH 4 OH and of Cr(III) with 0.2 mol l −1 HNO 3 . Studies were carried out on the effect of retention and elution conditions for both Cr species. The limit of detection values, established as the concentration corresponding to three times the standard deviation of blank measurements divided by the …