0000000000384473
AUTHOR
Daniel Dobslaw
Removal of 2-butoxyethanol gaseous emissions by biotrickling filtration packed with polyurethane foam
The removal of 2-butoxyethanol from gaseous emissions was studied using two biotrickling filters (BTF1 and BTF2) packed with polyurethane foam. Two different inoculum sources were used: a pure culture of Pseudomonas sp. BOE200 (BTF1) and activated sludge from a municipal wastewater treatment plant (BTF2). The bioreactors were operated at inlet loads (ILs) of 130 and 195 g m(-3) hour(-1) and at an empty bed residence time (EBRT) of 12.5s. Under an IL of ∼130 g m(-3) hour(-1), BTF1 presented higher elimination capacities (ECs) than BTF2, with average values of 106±7 and 68±8 g m(-3) hour(-1), respectively. However, differences in ECs between BTFs were decreased by reducing the irrigation inte…
Comparison of inoculums in the removal of 2-butoxyethanol from air emissions by biotrickling filter: Performance and microbial monitoring
2-butoxyethanol is one of the most used glycol ether in industrial activities and the treatment of air 2-butoxyethanol-emissions become necessary. Biotechnologies are potential treatment technologies due to their low operational costs. The use of two inoculums in the treatment of 2-butoxyethanol by biotrickling filters (BTFs) packed with polyurethane-foam was studied. A pure culture of Pseudomonas putida, previously adapted to 2-butoxyethanol, was used as inocula in a BTF operated in the University of Stuttgart. Fresh activated sludge from a municipal waste water treatment plant was used as inocula in a BTF operated in the University of Valencia. An empty bed residence time of 12.5 s and in…