0000000000449587
AUTHOR
Giada La Scalia
showing 49 related works from this author
A multi objective genetic algorithm for the facility layout problem based upon slicing structure encoding
2012
This paper proposes a new multi objective genetic algorithm (MOGA) for solving unequal area facility layout problems (UA-FLPs). The genetic algorithm suggested is based upon the slicing structure where the relative locations of the facilities on the floor are represented by a location matrix encoded in two chromosomes. A block layout is constructed by partitioning the floor into a set of rectangular blocks using guillotine cuts satisfying the areas requirements of the departments. The procedure takes into account four objective functions (material handling costs, aspect ratio, closeness and distance requests) by means of a Pareto based evolutionary approach. The main advantage of the propos…
Innovative Recycling of Lime Slaker Grits from Paper-Pulp Industry Reused as Aggregate in Ambient Cured Biomass Fly Ash-Based Geopolymers for Sustain…
2019
Lime slaker grits and biomass fly ash are solid wastes produced by the Kraft paper-pulp industry that are commonly disposed of in landfill. However, recent studies and European regulations discourage such disposal practices. This work investigates an alternative and innovative way to recycle and reuse these wastes in the production of green geopolymeric mortars intended for application in the construction industry. Here, biomass fly ash was used as the main source of alumino-silicate in the binder precursor (70 wt.% substitution to metakaolin), and grits (ranging from 1&ndash
Simulation analysis of cold chain performance based on time–temperature data
2011
Perishable goods are a fundamental source of revenue for the retail sector; their management, however, constitutes a severe challenge for retailers and supply chain partners. A significant cost in particular is the fraction of products perished through the supply chain, which also constitutes an ethical and environmental concern. Supply chain organisation and operative characteristics have a significant influence on this matter, as in fact ensuring suitable temperature conditions for the stock-keeping units throughout the supply chain is mandatory for perishable products. Recent developments in sensing and communication technologies allow detailed monitoring and control of cold chain; howev…
Coffee biowaste valorization within circular economy: an evaluation method of spent coffee grounds potentials for mortar production
2021
Abstract Purpose Spent coffee grounds (SCG) are biowastes extensively generated within the coffee supply chain. Nowadays, their disposal represents an increasing environmental concern due to its toxicity and organic nature. With the estimated increase of coffee production and consumption in the upcoming years, there is an imperative need to find a proper reverse option, along with a novel industrial application, which allows for the valorization of this coffee by-product within a circular economy perspective. This study aims at investigating a potential reuse of spent coffee grounds to produce novel construction materials to be used for sustainable buildings. Methods After having illustrate…
A sustainable phenolic compound extraction system from olive oil mill wastewater
2017
Abstract The reduction of environmental impact and the achievement of economic advantages based on by-product recovery is the aim of applying methodologies for phenolic compounds extraction from Olive Oil Mill Wastewater. Volume reduction of Olive Oil Mill Wastewater could generate important advantages in terms of waste disposal cost abatement and, in addition, reuse in the production of foods with health properties could lead to economic benefits. Despite the fact that literature shows that several techniques have been developed, few economic approaches have been presented. This paper assesses the economic feasibility of a system based on membrane filtration and reverse osmosis processes f…
Selection of novel geopolymeric mortars for sustainable construction applications using fuzzy topsis approach
2020
Construction is recognized as one of the most polluting and energy consuming industries worldwide, especially in developing countries. Therefore, Research and Development (R&
A non dominated ranking Multi Objective Genetic Algorithm and electre method for unequal area facility layout problems
2013
The unequal area facility layout problem (UA-FLP) comprises a class of extremely difficult and widely applicable optimization problems arising in diverse areas and meeting the requirements for real-world applications. Genetic Algorithms (GAs) have recently proven their effectiveness in finding (sub) optimal solutions to many NP-hard problems such as UA-FLP. A main issue in such approach is related to the genetic encoding and to the evolutionary mechanism implemented, which must allow the efficient exploration of a wide solution space, preserving the feasibility of the solutions and ensuring the convergence towards the optimum. In addition, in realistic situations where several design issues…
From lab to industry: Scaling up green geopolymeric mortars manufacturing towards circular economy
2021
Abstract Construction is nowadays considered an extremely energy intensive industry and one of the main sources of environmental pollution in the world. Therefore, the research and the development of novel energy-saving manufacturing processes and sustainable construction materials is more than ever urgent and challenging. This paper aims at identifying the industrial process for the production of novel geopolymers to be used as a greener substitute for cement, especially the Portland one, widely used for structural applications to significantly reduce the environmental impact of the construction industry. Here, the materials sustainability and the manufacturing process are improved by valo…
Life cycle analysis of innovative building materials based on circular coffee ground supply chain
2022
The construction sector is widely recognized as one of the most polluting mainly due to its intensive exploitation of natural resources and large energy consumption to produce traditional building materials. In the last years, alternative building materials have been developed with the aim to reduce the environmental burden of this sector. In particular, the use of geopolymer mortars as alternative cementitious materials is gaining increasing acceptance among scientists. Numerous laboratory studies demonstrate their suitability for construction applications, highlighting the potential environmental benefits that can be obtained from their large-scale production. This study aims to perform a…
Standardization of islet isolation outcome- A new automatic system to determine pancreatic islet viability
2011
Pancreatic islet transplantation is emerging as a therapeutic approach for patients affected by diabetes. This approach consists of a minimally invasive procedure replacing insulin-producing cells (pancreatic islets). The technique has been proven successful, but limitations have been identified. One of the major challenges of the procedure is the counting of the isolated pancreatic islets, which is currently jeopardized by subjectivity and inaccuracy. Determination of the accurate islet number is a crucial factor in determining the correlation between the isolation product and clinical outcome. In the proposed study, we have developed software capable of objectively evaluating islet number…
Multi-Criteria Decision Making support system for pancreatic islet transplantation
2011
Pancreatic islet transplantation consists of replacing insulin-producing cells to restore normal glycemia in diabetic patients. This is a minimal invasive procedure that has been proved successful. Unfortunately unpredictability of islet transplant outcome remains a frustrating and costly issue limiting the clinical implementation of this procedure. Multiple variables are involved in the procedure and assessment is subjective to individual operators. The aim of this study was to generate a system expressing the probability of transplant success in relation to four classes of identified variables (donor, organ, isolation and recipient). We have proposed the utilization of Multi-Criteria Deci…
A webGIS-based system for real time shelf life prediction
2016
Technologies to acquire and monitor changes in the product shelf life were described.Four different SL predictive models were considered.A simulated transport using a prototype of Smart Logistic Unit was analysed.Real time shelf life prediction system was implemented in a webGIS platform. Shelf-life (SL) prediction and Least Shelf-life First Out (LSFO) stock strategy are important factors in perishable food supply chain in order to reduce quality and economic losses.In particular, distribution represents one of the main critical phases in logistic chain management and only the introduction of monitoring procedure can allow a reduction in food losses. Literature shows several mathematical mo…
Coverage analysis of RFID indoor localization system for refrigerated warehouses based on 2D-ray tracing
2012
Human Factor Interrelationships to Improve Worker Reliability: Implementation of MCDM in the Agri-Food Sector
2023
Performance Shaping Factors (PSFs) are contextual, individual, and cognitive factors used in Human Reliability Analysis (HRA) to quantify the worker contribution to errors when performing a generic task. Although the empirical evidence demonstrates the existence of PSF interrelationships, the majority of HRA methods assume their independence. As a consequence, the resulting Human Error Probability (HEP) might be over- or underestimated. To deal with this issue, only a few qualitative guidelines or statistical-based approaches have been proposed so far. While the former are not well structured, the latter require a high computational effort and a proper number of input data. Therefore, the p…
Solving type-2 assembly line balancing problem with fuzzy binary linear programming
2013
This paper deals with the use of fuzzy set theory as a viable alternative method for modelling and solving the stochastic assembly line balancing problem. This paper presents a fuzzy extension of the simple assembly line balancing problem of type 2 SALBP-2 with fuzzy job processing times since uncertainty, variability, and imprecision are often occurred in real-world production systems. The job processing times are formulated by triangular fuzzy membership functions using their statistical distributions. This study proposes to solve a Fuzzy Binary Linear Problem FBLP with fuzzy coefficients in the objective function and in a constraint. Finally, the effect of the unbalancing of a station in…
An oxygen monitoring and control system inside a malaxation machine to improve extra virgin olive oil quality
2013
In recent years, oxygen content regulation during malaxation has been noted as a process parameter. The aim of this study was to identify the optimal time during the malaxation process of the olives of the Sicilian cultivar Nocellara del Belice when the presence of oxygen in the machine headspace activates the enzyme complex in favour of the volatile compounds, without compromising the phenolic composition. During the malaxation process, the atmosphere inside the malaxation machine was modified by blowing pure oxygen from cylinders at specific stages of the process (i.e., 5, 15, 25, and 35 min after the start of malaxation), using a system that allows the automatic and continuous maintenanc…
Facility layout problem: Bibliometric and benchmarking analysis
2019
Facility layout problem is related to the location of departments in a facility area, with the aim of determining the most effective configuration. Researches based on different approaches have been published in the last six decades and, to prove the effectiveness of the results obtained, several instances have been developed. This paper presents a general overview on the extant literature on facility layout problems in order to identify the main research trends and propose future research questions. Firstly, in order to give the reader an overview of the literature, a bibliometric analysis is presented. Then, a clusterization of the papers referred to the main instances reported in literat…
The sustainability of olive orchard planting management for different harvesting techniques: An integrated methodology
2019
Abstract The globalization of the olive oil market has caused greater competitiveness in terms of olive oil quality and production costs and the main countries interested in olive growing, have introduced efficient planting design and horticultural techniques in order to meet these requirements. In this paper the sustainability of olive orchard planting management for different olive fruit-harvesting methods has been assessed on the basis of the data gathered by the Geographic Information System and processed using a Multi-Criteria Decision Making Analysis. In particular, three different agronomic scenarios have been analyzed and a specific cultivar has been considered in order to ensure th…
Firefly algorithm based upon slicing structure encoding for unequal facility layout problem
2019
Finding the locations of departments or machines in a workspace is classified as a Facility Layout Problem. Good placement of departments has a relevant influence on manufacturing costs, work in process, lead times and production efficiency. This paper analyses the problem of allocating departments with restrictions in terms of unequal area and rectangular shape within a facility, in order to minimize the sum of material handling costs taking into account the satisfaction of the aspect ratio requested. In particular, we propose for the first time a Firefly Algorithm based on the slicing structure encoding. The proposed method was tested comparing the results obtained from other authors on t…
Real time assessment of hand-arm vibration system based on capacitive MEMS accelerometers
2012
Vibrations are a well known potential cause of health diseases and therefore constitute a main concern for the safety of workers in a large number of activities. In order to prevent health hazards, national and international institutions have issued laws and directives which establish recommended limits to the workers' exposure to vibrations during operations. Consequently, if the amount of adsorbed vibration exceeds the allowable daily limits the worker has to stop his job. Recent wireless sensing and communicating technologies can effectively be employed for such purpose, allowing to develop monitoring customized devices at affordable cost which could be easily employed during the workers…
Reducing waste and ecological impacts through a sustainable and efficient management of perishable food based on the Monte Carlo simulation
2019
Abstract In today’s competitive global market it is mandatory to improve warehousing operations integrating economic, environmental and social aspects. The recent advancement in monitoring technologies can greatly improve the performance of the food supply chain reducing product loss. In particular, in the perishable food supply chain, initially inventory operations are critical because they manage the material flows in very variable conditions. The deterioration level of the products as well as the market demand are the main factors that can influence warehouse strategy. This research aims to consider the application of sustainability principles in the context of warehouse storage, evaluat…
Preliminary analysis of warehouse localization systems based on RFID technology
2010
In the industrial warehouse design domain, today's computerized information systems have gained a relevant interest due to the issues related to asset tracking and traceability. In such context, the employment of new information technologies on warehouse management systems has opened new business opportunities due to the sensible price reduction in the last years. This paper focuses on the technical issues related to the realization of wireless localization systems for warehouses, which are necessary for the implementation of random allocation policies, and in particular investigates the opportunities offered by RFID technology in such context. The enforcement of random allocation policies …
Clean Agent Selection Approached by Fuzzy TOPSIS Decision-Making Method
2008
Abstract. It is well known that halons are ozone-depleting substances and their release into the atmosphere has contributed in the last decades to the reduction in the ozone layer. In consequence to the Montreal Protocol, an international agreement designed to gradually eliminate the use of such substances, fire protection industry researchers faced the challenge of finding effective solutions to replace halon extinguishers. This research aims to provide a method to support the decision maker in the selection of the most suitable extinguisher substance for a specific application. According to such framework, a set of quantitative and qualitative criteria has been established in the decision…
An expert system for vineyard management based upon ubiquitous network technologies
2011
Vineyard operations for quality wines production are currently based upon costly and time-consuming manual sampling operations required to assess the maturity phases of grapevines. The ripening process however is significantly influenced by the environmental parameters which nowadays can be effectively monitored by means of ubiquitous computing technologies. Besides the possibility of gathering data, hence, suitable tools are required to support the vineyard management process. The present research concerns the development of an expert system to effectively manage the vineyard operations. The methodology is based on the analysis of the time series of indices related to the maturation phases…
Selection of a Sustainable Functional Pasta Enriched with Opuntia Using ELECTRE III Methodology
2017
In the last decade, the nutritional and health benefits of Opuntia (Opuntia ficus-indica (L.) Mill.) were discussed by academic scientists and private companies. In particular, the introduction of this substance in frequently consumed foods, like, for example, pasta and bakery products, could have a wide diffusion due to its rich composition in polyphenols, vitamins, polyunsaturated fatty acids, and amino acids. The identified natural cactus compounds are responsible for biologically relevant activities including anti-inflammatory, antioxidant, hypoglycemic, antimicrobial, and neuro-protective properties. The aim of this paper is the evaluation of the best combination of Opuntia quantity an…
Predictive shelf life model based on RF technology for improving the management of food supply chain: A case study
2016
The aim of this paper was the development of a Smart Logistic Unit (SLU) based on RF technology to support the management of the food supply chain, in order to guarantee the shelf life of products in agreement with logistic efficiency and system sustainability. For this purpose, the main parameters that influence the quality of perishable products were determined and a shelf life equation based on Volatile Organic Compounds (VOCs) was modelled. The levels of VOCs were gathered by the sensors allocated inside the SLU, which configures as the remote element of a system for identification and data transmission. The proposed model was then validated through an experimental test, simulating the …
A multifunctional plant for a sustainable reuse of marble waste toward circular economy
2021
The marble processing cycle involves the production of large quantities of wastes whose disposal represents an economic and environmental concern for marble companies due to the difficulty of identifying suitable landfills and the high transfer costs. In this context, the design of a sustainable industrial plant that allows the reuse of the calcium carbonate (CaCO3) contained in the marble waste is extremely challenging. With this recognition, the main industrial applications of CaCO3 are firstly analyzed in the present work to identify the physical–chemical properties required to CaCO3 in these contexts. Later, different plant solutions are suggested to recover CaCO3 from marble sludge in…
Economic and Environmental Assessment of Biomass Power Plants in Southern Italy
2022
In 2019, Europe adopted the New Green Deal as a strategic plan to become a competitive, resource-efficient, and driven economy by reducing its gas emissions and carbon footprint. Due the COVID-19 pandemic, this strategic plan was recently updated to expedite the green transition of European industries. Therefore, the present paper deals with the problem of deciding an appropriate size for a biomass plant that directly produces electric energy by means of two different conversion processes: combustion and gasification. After an initial estimation of the energy potential in western Sicily, GIS data of biomass growth were used to identify the appropriate size for the power plants under investi…
Project Management Information Systems (PMISs): A Statistical-Based Analysis for the Evaluation of Software Packages Features
2021
Project Managers (PMs) working in competitive markets are finding Project Management Information Systems (PMISs) useful for planning, organizing and controlling projects of varying complexity. A wide variety of PMIS software is available, suitable for projects differing in scope and user needs. This paper identifies the most useful features found in PMISs. An extensive literature review and analysis of commercial software is made to identify the main features of PMISs. Afterwards, the list is reduced by a panel of project management experts, and a statistical analysis is performed on data acquired by means of two different surveys. The relative importance of listed features is properly comp…
Safety in the use of portable olive harvesters
2011
Risk Assessment of Hand-Arm Vibration in Different Types of Portable Shakers for Olives Harvesting
2010
La shelf life per la gestione delle scorte
2011
EXPERIMENTAL EVALUATION OF THE ACCURACY OF RFID BASED LOCALIZATION SYSTEMS FOR INDUSTRIAL WAREHOUSES
2009
A novel device for assessing the health risk caused by hand-arm vibrations in olives harvesting
2012
The mechanization of olive harvesting is very important both to reduce the costs of production and to assure the oil quality because the manual harvest does not allow to operate at the right time and also need a long period to be completed. The use of portable shakers, that are spreading more than others typologies, can give a solution to the problem. However, the use of such equipment may involve risk of exposure to hand-transmitted vibration. The aim of this study was to assess the level of exposure to hand-arm vibration of the operators using portable shakers (reference standards UNI EN ISO 5349-1:2004, Italian Low Decree 81/2008). The research presented here concerns the definition of a…
Evaluation of maintenance service procurement contracts
2009
Analisi Multicriterio per l'ottimizzazione delle pratiche colturali in olivicoltura
Solving type-2 Assembly Line Balancing Problem with Fuzzy Binary Linear Programming
2013
Controller temperature grinding under atmosphere for Almond (Prunus Dulcis) Paste production
2010
Coverage analysis of RFID indoor localization system for refrigerated warehouse based on 2-D Ray tracing
2010
Due to the ever increasing diffusion of Radio Frequency IDentification (RFID) in logistic processes, the localization of the tags in the environment is becoming an important feature for many RFID-based inventory management systems. RFID-based Location system will allow offering value-added services logistics operators, and RFID tags can be used for more than just labeling items. This paper proposes a Received Signal Strength (RSS) based positioning system for perishable products equipped with active UHF RFID tags inside a refrigerated warehouse (4C°). The major performance metrics of interest for indoor positioning systems are the accuracy and the precision in estimating signal strength wit…
A system for detecting hand-arm vibration in the use of portable shakers for olives harvesting
2012
The mechanization of olive harvesting is very important both to reduce the costs of production and to assure the oil quality because the manual harvest does not allow to operate at the right time and also need a long period to be completed. The use of portable shakers, that are spreading more than others typologies, can give a solution to the problem. However, the use of such equipment may involve risk of exposure to hand-transmitted vibration. The aim of this study was to assess the level of exposure to hand-arm vibration of the operators using portable shakers (reference standards UNI EN ISO 5349-1:2004, Italian Low Decree 81/2008). An effective approach would rather involve to equip the …
Controlled temperature grinding under modified atmosphere for Almond (Prunus Dulcis)paste production
2010
The research is focused on almond paste production and aims at developing a new production process to deliver the high nutitional content of the raw almonds into finished product
Biomass power plants in western Sicily, Italy
2011
DOUBLE UMBILICAL IDENTIFICATION DEVICE MOTHER-INFANT, AND METHOD THEREOF
2011
Standardization of islet isolation outcome: a new automatic system to determine pancreatic islet viability
2009
An Innovative Shelf Life Model Based on Smart Logistic Unit for an Efficient Management of the Perishable Food Supply Chain
2017
Despite the recent interest towards food safety and control, it is generally difficult to ensure full products traceability through industrial food chains, due to the lack of efficient information and communication systems. Consequently, nowadays, the protection of food products often ends at the gates of the producer without any investigation about the status of their quality at the consumer’s location. The aim of this paper was the development of a supply chain monitoring system based on a smart logistic unit (SLU) to support the integrated management of the food supply chain from “farm to fork” in order to guarantee and control food safety and shelf life (SL) of products in agreement wit…