Corrosion in amine units for acid gas treatment : a laboratory study
International audience; Corrosion represents one of the most important operational issues in amine units used for acid gas treatment. Considerable experience is available in the literature both on laboratory and in the field. Based on this experience, proven mitigation strategies are available, using corrosion inhibitors or corrosion resistant alloys at selected locations in the plant. However, the technical causes of the corrosivity of amine solvents are still not well understood. Furthermore, recent field experience showing severe corrosion in sweet units pointed out the difficulty to transpose design solutions from sour to sweet gas. There is obviously a need for more precise data on the…
Corrosion in alkanolamine used for acid gas removal: From natural gas processing to CO2 capture
The aim of this paper is to review some of the parameters influencing the corrosivity of alkanolamine solvents used for natural gas purification or for CO2 capture. In the light of literature data and of new experimental results, the influences of temperature and of acid gas loading are discussed. These two parameters appear to have a strong impact on corrosion rates of carbon steel, with extrapolated corrosion rates of several tens of mm/year for the highest temperature and acid gas loading condition.
Corrosion in alcanolamines for natural gas treatment - High temperature experiments in lean and rich conditions
International audience; In the oil and gas industry, acid gas removal is required for the treatment of natural gas. New applications were also recently pushed forward for CO 2 capture from the flue gas of power plants. For both applications, the most widespread industrial processes use absorption-desorption by an alcanolamine solvent. In such amine units for acid gas removal, corrosion represents an important operational concern. Influent parameters governing corrosion are temperature and acid gas loading, amine nature, and the presence of degradation by-products. Some of these parameters were studied with corrosion experiments in autoclave. Test temperature was between 110°C and 120°C, i.e…