0000000000807428
AUTHOR
Antonio Díez
Recent Advances in Forward Brillouin Scattering: Sensor Applications
In-fiber opto-mechanics based on forward Brillouin scattering has received increasing attention because it enables sensing the surrounding of the optical fiber. Optical fiber transverse acoustic resonances are sensitive to both the inner properties of the optical fiber and the external medium. A particularly efficient pump and probe technique—assisted by a fiber grating—can be exploited for the development of point sensors of only a few centimeters in length. When measuring the acoustic resonances, this technique provides the narrowest reported linewidths and a signal-to-noise ratio better than 40 dB. The longitudinal and transverse acoustic velocities—normalized with the fiber radius—can b…
Long- and short-term stability of all polarization-maintaining thulium doped passively mode-locked fiber lasers with emission wavelengths at 1.95 µm and 2.07 µm
In this work, we compare the operation of a passively modelocked polarization-maintaining emission in two thulium-doped fiber lasers pumped at 1561 nm, with emission at wavelengths of 1.951 μm in one case and 2.07 μm in the other. We obtained a sequence of light pulses at 15.6 MHz, whose temporal width was 81 ps at 1.95 μm, and a sequence of light pulses at 13.1 MHz, whose temporal width was 94 ps at 2.07 μm. Finally, we also measured the long-term stability of this setup during a 24-h operation, as well as the short-term stability in a simulated harsh environment. The results confirm the superior performance of fiber laser systems with a fully polarization-maintaining design.
Nonlinearity measurement undergoing dispersion and loss
Accurate knowledge of the nonlinear coefficient is extremely important to make reliable predictions about optical pulses propagating along waveguides. Nevertheless, determining this parameter when dispersion and loss are as important as nonlinear effects brings both theoretical and experimental challenges that have not yet been solved. A general method for measuring the nonlinear coefficient of waveguides under these demanding conditions is here derived and demonstrated experimentally in a kilometer-long standard silica fiber pumped close to 2 µm.