0000000000957536
AUTHOR
Rosario De Lisi
showing 55 related works from this author
Adsorption of a dye on clay and sand. Use of cyclodextrins as solubility-enhancement agents.
2007
Abstract Laboratory-scale studies were aimed at elucidating the physico-chemical aspects on the removal process of crystal violet (CV) from waters and solid substrates. The laponite clay (RD) and sand were chosen for the double aim at investigating them as CV adsorbents for water treatment and as substrates which mime the soil components. Sand is very effective in removing CV from waters. The cyclodextrins (CDs) were exploited as solubility-enhancement agents to remove CV from the solid substrates. They are powerful solvent media because they extract the CV from sand forming water-soluble CV/CD inclusion complexes and do not show affinity for sand. Optimum performance was shown by the modif…
Aggregation in aqueous media of tri-block copolymers tuned by the molecular selectivity of cyclodextrins
2009
The water + cyclodextrin + poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) mixtures have been investigated to explore the temperature effect on the aggregation of the copolymer in the presence of cyclodextrins (CDs). The CDs with different cavity sizes were chosen because they may include either the hydrophilic poly(ethylene oxides) block or both kinds of blocks. The differential scanning calorimetry and viscosity experiments straightforwardly evidenced that the critical micellar temperature is shifted to larger values by adding a CD which is able to include the middle poly(propylene oxide) block while it is not influenced by the presence of CD which is selective to the poly…
Group contributions to the infinite dilution partial molar volumes of alkanes, alcohols, and glycols in polar organic solvents
1997
Densities of binary mixtures of polar organic solvents with alcohols were measured at 25‡C. The solvents studied were N,N-dimethylformamide, dimethylsulfoxide, and formamide while alcohols were butanol, pentanol, hexanol, and 1,4-butanediol. Density measurements of hydrocarbons (from pentane to dodecane and some heptane isomers) + N,N-dimethylformamide were also performed. From these data the apparent molar volumes of alcohols and hydrocarbons as functions of concentration were calculated. The standard partial molar volumes were obtained by extrapolation to infinite dilution and are discussed in terms of group contributions.
Thermodynamic properties of alcohols in a micellar phase. Binding constants and partial molar volumes of pentanol in sodium dodecylsulfate micelles a…
1984
Densities of the ternary system water-sodium dodecylsulfate (NaDS)-pentanol and of the binary systems butanol-octane and pentanol-octane were measured at 15, 25, and 35 °C. The apparent molar volume of pentanol in the ternary system was analyzed using a mass-action model for the alcohol distribution in micellar solutions. The partial molar volume of alcohol bound to the micelles and the ratio between the binding constant and the aggregation number of the surfactant are calculated. The partial molar volume binding constant, is discussed in terms of solubilization sites of the alcohol in the micelles whereas the binding constant is compared with that derived from the Nernstian partition const…
Copolymers sensitive to temperature and pH in water and in water+oil mixtures: A DSC, ITC and volumetric study
2011
Block copolymer micelles are receiving an increasing interest because of the variety of structures and the possibilities to tune them by changing external and internal parameters achieving the desired properties for a specific purpose. We have investigated the acid/base behavior, self-assembling and solubilization ability towards polar oils of star-like copolymers named Tetronics. They are composed of branched four-arms each one consisting of two blocks made of EO and PO units linked to the diethylenediamine group, which confers pH response ability. The copolymers T1107 and T90R4 were studied with a sequential and reverse architecture. The thermodynamics of the acid/base equilibrium was stu…
Thermodynamics of Surfactant, Block Copolymer and Their Mixtures in Water: The Role of the Isothermal Calorimetry
2009
The thermodynamics of conventional surfactants, block copolymers and their mixtures in water was described to the light of the enthalpy function. The two methodologies, i.e. the van't Hoff approach and the isothermal calorimetry, used to determine the enthalpy of micellization of pure surfactants and block copolymers were described. The van't Hoff method was critically discussed. The aqueous copolymer+surfactant mixtures were analyzed by means of the isothermal titration calorimetry and the enthalpy of transfer of the copolymer from the water to the aqueous surfactant solutions. Thermodynamic models were presented to show the procedure to extract straightforward molecular insights from the …
Thermodynamics of binary mixtures: Volumes, heat capacities, and dilution enthalpies for then-pentanol+2-methyl-2-butanol system
1983
The densities, heat capacities, and dilution enthalpies ofn-pentanol+2-methyl-2-butanol mixtures have been measured, in many cases as a function of temperature, over the complete mole fraction range. Excesses thermodynamic properties, apparent and partial molar heat capacities, volumes and expansibilities were derived. The concentration and temperature dependences of these functions are discussed in terms of the variations of the structure of the system caused by the participation of the two alcohol molecules (with quite different steric hindrance of the alkyl chain around the-OH group) in the dynamic intermolecular association process through hydrogen bonding.
Apparent molar volumes of 1-pentanol in water fromT=298 K toT=413 K atp=0.1 MPa andp=19 MPa
1996
Abstract Densities of 1-pentanol aqueous solutions were measured by using a vibrating tube densimeter especially designed and equipped to perform accurate measurements from ambient conditions up toT=423 K andp=80 MPa. The densimeter was tested by measuring densities of NaCl (aq). A comparison with the most reliable literature data showed very good agreement with differences lower than (0.03 and 0.1) kg·m−3for molalities below and above 0.5 mol·kg−1, respectively. From the density measurements, the apparent molar volumes of 1-pentanol in water,Vφwere determined as a function of molalitymat temperatures fromT=298 K toT=413 K atp=0.1 MPa andp=19 MPa. At a given temperature and pressure, and pa…
Conductance of potassium halides near the temperature of maximum density of water
1981
The conductances of dilute aqueous solutions of KCl, KBr, and KI have been measured over the temperature range 2 to 8°C and have been analyzed by the Fuoss-Hsia equation. The ionic Walden products at infinite dilution have been discussed in terms of local viscosity. The temperature dependence of these products suggest that near the temperature of maximum density of water, the structure-breaking ability of these ions changes in a regular way.
Volume and heat capacity studies to evidence interactions between cyclodextrins and nicotinic acid in water
2008
Density and heat capacity of the water+cyclodextrin (CD), water+nicotinic acid (NA) and water+CD+NA mixtures were determined at 298.15 K. CDs with different cavity size and alkylation were selected. From the experimental data the apparent molar properties were calculated. Assuming the formation of inclusion complexes of 1:1 stoichiometry, these properties were modeled and provided the stability constants of CD/NA inclusion complexes and the corresponding property change. The binding of NA with the smallest sized alpha-cyclodextrin (alpha-CD) generates more stable complexes accompanied by the lower volume and the heat capacity changes. These results are in agreement with earlier proposed bin…