A Thermo-Kinetic Study of Titanium Oxidation Assisted by a Nd-YAG Pulsed Laser

Structural Stability of Hafnia-Based Materials at Ultra-High Temperature

This study assesses the structural stability at ultra-high temperature of the following selected compositions: 6.5 and 14 mol. % of RE2O3 (RE = Dy, Y, Er, Yb, and Lu) doped HfO2. Under thermal cycling and thermal shock, the structural stability was evaluated at 2400°C with water vapor flux using a specific test bench with a 3 kW CO2 laser. The cubic phase stability, which is theoretically important in the broad temperature range from 25 to 2800°C, was determined by a quantitative analysis of the X-ray diffractograms. Fully and partially stabilized HfO2, obtained respectively with 14 mol. % and 6.5 mol. % of dopants, showed different behaviors to thermal damage. Thermal expansion was measure…

Surface modifications induced by pulsed-laser texturing—Influence of laser impact on the surface properties

Abstract Laser cleaning technology provides a safe, environmentally friendly and very cost effective way to improve cleaning and surface preparation of metallic materials. Compared with efficient cleaning processes, it can avoid the disadvantages of ductile materials prepared by conventional technologies (cracks induced by sand-blasting for example) and treat only some selected areas (due to the optical fibers). By this way, laser technology could have several advantages and expand the range of thermal spraying. Moreover, new generations of lasers (fiber laser, disc laser) allow the development of new methods. Besides a significant bulk reduction, no maintenance, low operating cost, laser f…

Turbulences of the supersonic gas flow during cold spraying and their negative effects: A DNS CFD analysis coupled with experimental observation and laser impulse high-speed shadowgraphs of the particles in-flight flow

Abstract This paper investigates the phenomenological flow during cold spraying through DNS CFD analysis and experimental observations. The transient DNS computation shows that the gas flow begins to be instable inside the nozzle and generates self-sustained intermittent swirls across the nozzle exit due the shearing behavior of the flow. There is alternate swirling within the separated sheared layers on top and then on bottom of the jet, at sporadic time intervals. The swirls are not strictly periodic in nature, but they recur with an irregular frequency. The temperature field exhibits analogous variation and the thermal turbulence produces a heating confinement within the end zone of the …

Cold gas dynamic spray technology: A comprehensive review of processing conditions for various technological developments till to date

Abstract Today, cold gas dynamic spray (CGDS) technology has thrived with considerable capabilities for manufacturing various technological depositions. The deposition conditions have been developed through many years and that have led to produce ample experimental data which is available in the literature. But, recent research and development activities also reveal innovative findings regarding various deposition conditions. This paper contains a review of experimental deposition procedures for the cold spray additive manufacturing. Details of processing conditions are reported and classified into various categories of baseline working conditions, specific processing including deposition o…

Microstructure impact on high temperature corrosion behavior of AISI 316L stainless steel additively manufactured by Selective Laser Melting (AM-SLM)

International audience; Additive Manufacturing by Selective Laser Melting (AM-SLM) is a near-net shape method producing dense and geometrically complex materials from micrometric powders. This process involves complete melting and very high cooling rates who induce a refinement of microstructure, improving the mechanical properties of the material [1,2]. However, the impact of these new microstructures on real functioning properties, like for instance the high temperature durability, needs to be studied. In this purpose, AISI 316L is considered in this work. Samples elaborated by AM-SLM and by conventional metallurgy were oxidized under laboratory air at 900°C for periods up to 3000h. The r…

MICRO-SCALE STUDY OF RESIDUAL STRESSES IN CR2O3 COATINGS SPRAYED BY APS

International audience; Whichever the application field, every material forming process generates residual stresses on the surface. While they are likely to enhance the aimed properties of the final mechanical part, these stresses may also drastically reduce them and result in early failures. Therefore, understanding the residual stress state remains a major challenge when coating complex parts, especially as most characterization methods at the microscopic scale involve specific sample preparation procedures which may affect the residual stresses field. This work investigates the residual stress state that exists in chromium oxide coatings deposited via Atmospheric Plasma Spray (APS), usin…

Pulsed laser growth and characterization of thin films on titanium substrates

Abstract Colored layers were obtained by laser surface treatment of Ti substrates with a pulsed Nd:YAG Q-switched laser. The changes in the morphology, structure and chemical composition of the layers were studied by SEM, EDS, XPS, SIMS and Raman spectroscopy as a function of the laser fluence in the 4–60 J cm −2 . For laser fluences lower than 25 J cm −2 , the layers are colorless or yellow. Their surface is smooth, but they display cracks which increase when the fluence increases. The O/Ti ratio, determined by XPS analysis, varies from 0.7 (colorless layers) to 1.3 (yellow layer). Moreover, XPS spectra evidence non-negligible amounts of nitrogen and carbon in these layers. Raman spectra s…