Relationship between scanning near-field optical images and local density of photonic states

2001

From numerical calculations based on Green's dyadic formalism, we show that a scanning near-field optical microscope (SNOM) working with a point-like illuminating probe delivers images that contain features directly related to the local density of photonic states (LDOS). More precisely, an unambiguous identification of the partial LDOSs (x, y or z polarized) can be made in the SNOM images when the solid angle of detection reaches 2π sr.

Surface plasmon near-field imaging of very thin microstructured polymer layers.

2004

We report on the near-field imaging of microstructured polymer layers deposited on an homogeneous metal thin film on which a surface plasmon mode is excited. The microstructures in the polymer layers are designed by electron beam lithography, and the near-field imaging is performed with a photon scanning tunneling microscope (PSTM). We show that, despite their very small height, the microstructures can be conveniently imaged with a PSTM thanks to the field enhancement at the surface of the metal thin film supporting the surface plasmon. The influence of the illumination conditions on the contrast of the PSTM images is discussed. In particular, we show that both the field enhancement and the…

Refractive micro-optical elements for surface plasmons: from classical to gradient index optics.

2010

Controlling the propagation of surface plasmons along a metal-dielectric interface is a key feature for the development of surface plasmon based circuits. We have designed various two-dimensional refractive dielectric optical elements for surface plasmons (SP) and characterized their capacity to route SP, using near- or far-field techniques. We first present basic devices analogous to usual optical components and the associated challenges for SP optics. We then use a metamaterial approach to locally vary the refractive index and fabricate gradient index structures for SP circuitry.

Silicon-loaded surface plasmon polariton waveguides for nanosecond thermo-optical switching

2014

A MHz-bandwidth thermo-optical (TO) plasmonic switch operating at telecommunication wavelengths and based on a hybrid solid-state silicon-loaded surface plasmon polariton waveguide design is demonstrated numerically. The nanosecond (ns) TO response of the switch is due to the high thermal conductivities of the employed materials and we demonstrate specifically a 10 dB extinction ratio in the time-dependent switch transmission which features a pulsed 1 ns rise time followed by a 25 ns fall time when the switch is photo-thermally activated by a ns pulse at 532 nm wavelength.

High spatial resolution strain measurements at the surface of duplex stainless steels

2007

International audience; The determination of local strain fields at the surface of materials is of major importance for understanding their reactivity. In the present paper, lithography is used to fabricate grid points at the microscale and to map strain gradients within grains and between grains. This method was applied to duplex stainless steels which exhibit heterogeneous strain distributions under straining conditions. The influence of various parameters (the specimen microstructure, the density of slip bands, the number of systems activated and the grid geometry) on the strain value was discussed.

Active plasmonics in WDM traffic switching applications

2012

With metal stripes being intrinsic components of plasmonic waveguides, plasmonics provides a "naturally" energy-efficient platform for merging broadband optical links with intelligent electronic processing, instigating a great promise for low-power and small-footprint active functional circuitry. The first active Dielectric-Loaded Surface Plasmon Polariton (DLSPP) thermo-optic (TO) switches with successful performance in single-channel 10 Gb/s data traffic environments have led the inroad towards bringing low-power active plasmonics in practical traffic applications. In this article, we introduce active plasmonics into Wavelength Division Multiplexed (WDM) switching applications, using the …

Submicrometer in-plane integrated surface plasmon cavities.

2007

International audience; The optical properties of in-plane integrated surface plasmon polariton (SPP) cavities comprised of a thin film area sandwiched between two one-dimensional Bragg SPP mirrors are investigated numerically and experimentally. We discuss the resonance condition of these cavities, and we analyze in details the physical origin of the dispersion of this resonance. On the basis of numerical results, we show that in-plane SPP cavities can be used to achieve local SPP field enhancement and antireflecting SPP layers. The numerical results are compared to near-field optical images recorded by operating a photon scanning tunneling microscope. From the near-field images recorded o…

Surface plasmon interference fringes in back-reflection

2010

We report the experimental observation of surface plasmon polariton (SPP) interference fringes with near-unity visibility and half-wavelength periodicity obtained in back reflection on a Bragg mirror. The presented method based on leakage radiation microscopy (LRM) represents an alternative solution to optical near-field analysis and opens new ways for the quantitative analysis of SPP fringes. With LRM we investigate various SPP interference patterns and analyze the high reflectivity of Bragg mirror in comparison with theoretical models.

Analysis of the angular acceptance of surface plasmon Bragg mirrors

2007

International audience; We analyze an important aspect of the behavior of surface plasmon polariton (SPP) Bragg mirrors: the dependence of the angular acceptance for reflection on the incidence angle. By means of leakage radiation microscopy, both in direct and Fourier space, we observe that the angular acceptance diminishes for increasing incidence angles. This effect, which can considerably affect the design of devices based on these elements, is shown to be the consequence of the decrease of the bandgap width with increasing incidence angle. (c) 2007 Optical Society of America.

Determinant role of the edges in defining surface plasmon propagation in stripe waveguides and tapered concentrators

2012

International audience; In this paper, we experimentally show the effect of waveguide discontinuity on the propagation of the surface plasmon in metal stripes and tapered terminations. Dual-plane leakage microscopy and near-field microscopy were performed on Au stripes with varied widths to imag29e the surface plasmon intensity distribution in real and reciprocal spaces. We unambiguously demonstrate that edge diffraction is the limiting process determining the cutoff conditions of the surface plasmon mode. Finally, we determine the optimal tapered geometry leading to the highest transmission.

Design, near-field characterization, and modeling of 45 circle surface-plasmon Bragg mirrors

2006

The development of surface plasmon polariton (SPP) optical elements is mandatory in order to achieve surface plasmon based photonics. A current approach to reach this goal is to take advantage of the interaction of SPP with defects and design elements obtained by the micro- or nano-structuration of the metal film. In this work, we have performed a detailed study of the performance and behavior of SPP-Bragg mirrors, designed for 45\ifmmode^\circ\else\textdegree\fi{} incidence, based on this approach. Mirrors consisting of gratings of both metal ridges on the metal surface and grooves engraved in the metal, fabricated by means of electron beam lithography and focused ion beam, have been consi…

Measuring the differential scattering cross-section of gold nanoparticles - art. no. 70321E

2008

International audience; In this paper we present an experimental apparatus capable of measuring the differential scattering cross sections of individual nanoparticles and arrangement of nanoparticles. We show that the mapping a partial differential scattering cross section, qualitative information about the electromagnetic local density of states dominated by evanescent modes scattered by the structure can be obtained.

Plasmon polaritons of metallic nanowires for controlling submicron propagation of light

1999

Laboratoire de Physique, Optique Submicronique, Universite´de Bourgogne, BP 47870, F-21078 Dijon, France~Received 29 April 1999!We use the Green dyadic technique to study the propagation of a local excitation along metallic nanowiresof a subwavelength cross section. The metallic nanowires are elongated parallelepipeds deposited on a trans-parent substrate. A tightly focused plane wave illuminates one end of the nanowires. The localized surface-plasmon resonances of the nanowires propagate the local excitations over distances larger than the incidentwavelength. The properties of the electromagnetic eigenmodes of the nanowires are analyzed in terms of thelocal density of states. @S0163-1829~9…

Squeezing the Optical Near-Field Zone by Plasmon Coupling of Metallic Nanoparticles

1999

We report on the experimental observation of near-field optical effects close to Au nanoparticles using a photon scanning tunneling microscope (PSTM). Constant height operation of the PSTM allowed an unprecedented direct comparison with theoretical computations of the distribution of the optical near-field intensity. An unexpected squeezing of the optical near field due to plasmon coupling was observed above a chain of Au nanoparticles.

Efficient unidirectional nanoslit couplers for surface plasmons

2007

5 pages, 4 figures.

Detection of the optical magnetic field by circular symmetry plasmons

2000

We report on the influence of coating a sharpened optical fiber tip with Au when observing nanofabricated dielectric structures with a Photon Scanning Tunneling Microscope (PSTM) in constant-height mode. For well-defined incident wavelengths and coating thicknesses, we found that such tips detect the distribution of the magnetic field associated with the optical wave in the near-field zone. A simple tip model indicates that this phenomenon is related to the excitation of circular symmetry plasmons in Au coated tips.

Integrated plasmonic waveguides: A mode solver based on density of states formulation

2009

International audience; We express the density of states (DOS) near guided resonances of plasmonic waveguides by using multiple-scattering theory. In direct analogy with the case of localized electronic defect states in condensed matter, we demonstrate that optical DOS variations follow a lorentzian profile near guided modes resonances. The lorentzian shape gives quantitative information on the guided modes (effective index, propagation length, and polarization state). We numerically investigate both leaky and bound (lossy) modes supported by dielectric-loaded surface-plasmon-polariton waveguides.

Super-Resolution Scanning Near-Field Optical Microscopy

2007

Scanning near-field optical microscopy (SNOM) is a method to obtain information about the optical properties of a sample at a lateral resolution below the diffraction limit of far-field microscopy. In SNOM, a light source of a dimension which is small compared to the wavelength of light and which is held at a small distance from the sample is scanned across the surface of the sample. The modulation by the sample of the light emitted from the source is recorded as a signal. As a general rule one may say that the size of the source and the distance to the sample limit the resolution of SNOM. A radiating self-emitting point dipole may be regarded as an idealized SNOM source. With such a source…

Dielectric-loaded surface plasmon polariton waveguides: Figures of merit and mode characterization by image and Fourier plane leakage microscopy

2008

International audience; Waveguiding of surface plasmon polaritons by dielectric-loaded metal structures is studied in detail by combining numerical simulations and leakage radiation microscopy. These types of waveguides are first numerically investigated using the effective index model and the differential method. We analyzed systematically the influence of the ridge width and thickness of the waveguide on the properties of the surface plasmon guided modes. In particular we investigated the confinement factor of the modes and their associated propagation lengths. These two parameters can be optimized by adjusting the thickness of the dielectric layer. Waveguides loaded with thick and thin d…

Recess photomask contact lithography and the fabrication of coupled silicon photonic and plasmonic waveguide switches

2015

Display Omitted A lithography technique capable of printing submicron-sized features inside deep cavities is presented.A so-called recess photomask adapted to the wafer's topography is employed.Based on a standard mask aligner, Recess Photomask Contact Lithography has moderate cost.Its efficiency for a photonic/plasmonic switch application was demonstrated experimentally.The technique is extensible to any design and to wafers with multiple level recesses. A novel lithographic method is presented, based on the use of a mask aligner in the contact mode with a modified photomask, the so-called recess photomask; its goal is the printing of submicron-sized patterns into deep cavities of a chip, …

Near-field observation of surface plasmon polariton propagation on thin metal stripes

2001

International audience; We use a photon scanning tunneling microscope to probe the field of surface plasmon polariton modes excited on finite-width thin metal films (metal stripes). We first investigate the coupling between surface plasmons launched by a focused beam on a homogeneous thin film and the modes sustained by metal stripes of different widths. We show that. if the width of the metal stripe is about a few micrometers, a strong coupling with the stripe modes can be achieved at visible frequencies. A sharp transverse confinement of the field associated with the surface plasmon modes propagating on the metal stripe is unambiguously observed on the constant height photon scanning tunn…

Optical near-field distributions of surface plasmon waveguide modes

2003

International audience; Thin gold stripes, featuring various widths in the micrometer range, were microfabricated to obtain surface-plasmon guides on a glass substrate. Each metal stripe (MS) was excited by an incident surface-plasmon polariton which was itself launched on an extended thin gold film by the total internal reflection of a focused beam coming through the substrate. The optical near-field distributions of the surface-plasmon (sp) modes sustained by the stripes were then recorded using a photon scanning tunneling microscope (PSTM). For a fixed frequency of the incident light, these field distributions are found to depend on the widths of the stripes. We first provide an experime…

Near-field characterization of Bragg mirrors engraved in surface plasmon waveguides

2004

International audience; Surface plasmon waveguides (SPW's) are metal ridges featuring widths in the micrometer range and thicknesses of a few tens of nanometers. A focused ion beam has been used to carve microscatterers into gold SPW's and the near-field distributions around these microstructures are observed by means of photon scanning tunneling microscopy (PSTM). On the basis of near-field images, we show that a finite length periodic arrangement of narrow slits can reflect a surface plasmon mode propagating along a SPW. The reflection efficiency of the micrograting is found to depend upon the number of slits, the period of the grating, and the incident wavelength. The optimum reflection …

Tailoring the transmittance of integrated optical waveguides with short metallic nanoparticle chains

2004

We study the ability of noble metal nanoparticle chains supporting localized surface plasmons to tailor the transmittance of channel waveguides on which they are deposited. The optical interaction between a microwaveguide ~MWG! and various arrangements of nanoparticles is first analyzed by means numerical calculations based on the Green’s tensor formalism. For specific geometries of the particle chains, the transmission spectra of the composite device ~MWG and nanoparticles! exhibits strong modulations in the optical range with the appearance of a neat band gap. The results of an experiment inspired by this theoretical study are also discussed. The photon scanning tunneling microscope image…

Influence of the filling factor on the spectral properties of plasmonic crystals

2006

Plasmonics crystals (PCs) comprised of finite-size triangular lattices of gold bumps deposited on a gold thin film are studied by means of a near-field optical microscope. The plasmonic crystals fabricated by electron-beam lithography are illuminated by an incident surface plasmon polariton excited in the Kretschmann-Raether configuration at the gold/air thin-film interface for incident free-space wavelengths in the range $740--820\phantom{\rule{0.3em}{0ex}}\mathrm{nm}$. Based on the measurement of the surface plasmon polariton (SPP) damping distance in the crystals, the existence of a band gap for an incident SPP traveling along the two symmetry axes $\ensuremath{\Gamma}M$ and $\ensuremath…

Octave Spanning Supercontinuum in Titanium Dioxide Waveguides

2018

International audience; We report on the experimental generation of an octave-spanning supercontinuum in a 2.2 cm-long titanium dioxide optical waveguide with two zero dispersion wavelengths. The resulting on-chip supercontinuum reaches the visible wavelength range as well as the mid-infrared region by using a femtosecond fiber laser pump at 1.64 µm.

Dielectric-loaded plasmonic waveguide components: Going practical

2013

Surface plasmon propagating modes supported by metal/dielectric interfaces in various configurations can be used for radiation guiding similarly to conventional dielectric waveguides. Plasmonic waveguides offer two attractive features: subdiffraction mode confinement and the presence of conducting elements at the mode-field maximum. The first feature can be exploited to realize ultrahigh density of nanophotonics components, whereas the second feature enables the development of dynamic components controlling the plasmon propagation with ultralow signals, minimizing heat dissipation in switching elements. While the first feature is yet to be brought close to the domain of practical applicatio…

Titanium Dioxide Waveguides for Data Transmissions at 1.55 µm and 1.98 µm

2017

International audience; We demonstrate error free transmissions of 10 Gbps signals in titanium dioxide waveguides at wavelengths of 1.55 or 2 µm. An efficient coupling of light is achieved thanks to metal grating couplers and we have checked that the component could be used with standard CWDM SFP+ devices.

Surface plasmon polaritons in metal stripes and wires

2004

Surface plasmon polaritons (SPPs) are collective electron oscillations coupled to a light field which are propagating along the interface of a metal and a dielectric. As a surface wave, SPP modes feature properties essentially different from light-field modes in all dielectric structures. These properties could allow the realization of novel photonic devices that overcome certain limitations of conventional devices. Specifically, the realization of two-dimensional optics and light-field transport in sub-wavelength SPP waveguides seems feasible. In this review we discuss recent experimental advances regarding SPP waveguides, i.e. laterally confined metal thin films that guide SPPs. Electron-…

Direct observation of localized surface plasmon coupling

1999

We report on the direct observation of localized surface plasmon coupling using a photon scanning tunneling microscope. The surface plasmons are excited in gold nanostructures tailored by electron beam lithography. Electromagnetic energy transfer from a resonantly excited nanoparticle to a nanowire, which is not directly excited by the incident light is observed. Our experimental results appear to be in good agreement with theoretical computations based on Green's dyadic technique.

Local detection of the optical magnetic field in the near zone of dielectric samples

2000

International audience; We present a study of the influence of the probe composition on the formation of constant-height photon scanning tunneling microscope images when observing a dielectric sample. Dramatic effects due to the metallization of the tip are presented and discussed in detail. We show how the recorded images can look quite different when the probe is dielectric or coated with gold. Comparison with numerical calculations indicate that the experimental signals are of electric or magnetic nature depending on the composition of the tip. For well-defined conditions, gold-coated tips provide images of the distribution of the magnetic field intensity associated with the optical near…

Efficient photo-thermal activation of gold nanoparticle-doped polymer plasmonic switches

2012

International audience; We report on the photo-thermal activation of dielectric loaded plasmonic switches comprised of gold nanoparticle-doped polymer deposited onto a gold film. The plasmonic switches rely on a multi-mode interferometer design and are fabricated by electron beam lithography applied to a positive resin doped with gold nanoparticles at a volume ratio of 0.52%. A cross-bar switching is obtained at telecom wavelengths by pumping the devices with a visible beam having a frequency within the localized surface plasmon resonance band of the embedded nanoparticles. By comparing the switching performances of doped and undoped devices, we show that for the modest doping level we cons…

Colloidal Quantum Dot Integrated Light Sources for Plasmon Mediated Photonic Waveguide Excitation

2016

We operate micron-sized CdSe/CdS core–shell quantum dot (QD) clusters deposited onto gold patches as integrated light sources for the excitation of photonic waveguides. The surface plasmon mode launched by the QD fluorescence at the top interface of the gold patches are efficiently coupled to photonic modes sustained by titanium dioxide ridge waveguides. We show that, despite a large effective index difference, the plasmonic and the photonic modes can couple with a very high efficiency provided the vertical offset between the two kinds of waveguides is carefully controlled. Based on the effective index contrast of the plasmonic and the photonic modes, we engineer in-plane integrated hybrid …

Controlling Light Confinement by Excitation of Localized Surface Plasmons

2007

Localized surface plasmons can be used to control near-field optical phenomena in the subwavelength range. Specifically, this chaper reviews recent results which show that localized surface plasmons can confine the optical intensity down to nanoscopic dimensions. The discussion first considers how a collection-mode near-field optical microscope can observe the squeezing of the plasmon field of metallic nanostructures deposited on a flat surface. Numerical simulations then provide illustrations of the confined fields associated with nanostructures which are feasible using current microfabrication techniques. Finally, we present arguments which explain how localized surface plasmons can deliv…

Exploring 10 Gb/s transmissions in Titanium dioxide based waveguides at 1.55 pm and 2.0 pm

2017

Exploring new spectral bands for optical transmission is one of the solutions to support the increasingly demand of data traffic. The recent development of dedicated hollow-core photonic bandgap fibers [1], associated to the emergence of thulium doped fiber amplifiers [2] has recently focused the attention further in the infrared, and more specifically around 2 μm. Regarding integrated photonics, it becomes therefore interesting to find a suitable platform to operate at 2 μm as well as in the other more conventional spectral bands (going from 800 nm to 1550 nm). Here, we propose titanium dioxide (TiO 2 ) as a good candidate for integrated waveguide photonics and demonstrate, for the first t…

Light field propagation by metal micro- and nanostructures

2001

The ability to sustain plasmon oscillations gives rise to unique properties of metal nanostructures, which can be exploited for the controlled manipulation of light fields on the nanoscale. In this context we investigate electromagnetic coupling effects within lithographically produced ensembles of gold nanoparticles with a photon scanning tunnelling microscope. To provide an interface between these nano-optical devices and classical far-field optics, we investigate surface plasmon propagation on microstructured metal thin films.

Tuning of an Optical Dimer Nanoantenna by Electrically Controlling Its Load Impedance

2009

International audience; Optical antennas are elementary units used to direct optical radiation to the nanoscale. Here we demonstrate an active control over individual antenna performances by an external electrical trigger. We find that by an in-plane command of an anisotropic load medium, the electromagnetic interaction between individual elements constituting an optical antenna can be controlled, resulting in a strong polarization and tuning response. An active command of the antenna is a prerequisite for directing light wave through the utilization of such a device.

Observation of Light Confinement Effects with a Near-Field Optical Microscope.

1996

This Letter reports the experimental observation of light confinement effects by near-field optical microscopy. Depolarization effects giving rise to light confinement close to nanoscopic objects have been unambiguously observed in near-field optical images of subwavelength dielectric pads etched on a flat glass substrate. According to the incident polarization, this phenomenon leads to reverse contrasts in the near-field optical image of the same subwavelength objects.

Photo-thermal modulation of surface plasmon polariton propagation at telecommunication wavelengths

2013

International audience; We report on photo-thermal modulation of thin film surface plasmon polaritons (SPP) excited at telecom wavelengths and traveling at a gold/air interface. By operating a modulated continuous-wave or a Q-switched nanosecond pump laser, we investigate the photo-thermally induced modulation of SPP propagation mediated by the temperature-dependent ohmic losses in the gold film. We use a fiber-to-fiber characterization set-up to measure accurately the modulation depth of the SPP signal under photo-thermal excitation. On the basis of these measurements, we extract the thermo-plasmonic coefficient of the SPP mode defined as the temperature derivative of the SPP damping const…

Optical analogy to electronic quantum corrals.

2000

We describe full multiple-scattering calculations of localized surface photonic states set up by lithographically designed nanostructures made of a finite number of dielectric pads deposited on a planar surface. The method is based on a numerical solution of the dyadic Dyson's equation. When the pads are arranged to form a closed circle, we find field patterns that look like the electronic charge density recently observed above quantum corrals. We propose two experimental techniques that could be used to observe these electromagnetic modes in direct space.

Physics of Near-Field Optical Images

2005

Efficient unidirectional polarization-controlled excitation of surface plasmon polaritons

2014

Efficient excitation of surface plasmon polaritons (SPPs) remains one of the most challenging issues in areas of plasmonics related to information communication technologies. In particular, combining high SPP excitation efficiency and acceptance of any polarization of incident light appeared to be impossible to attain due to the polarized nature of SPPs. Here we demonstrate plasmonic couplers that represent arrays of gap SPP resonators producing upon reflection two orthogonal phase gradients in respective linear polarizations of incident radiation. These couplers are thereby capable of efficiently converting incident radiation with arbitrary polarization into SPPs that propagate in orthogon…

Surface plasmon interference excited by tightly focused laser beams

2007

International audience; We show that interfering surface plasmon polaritons can be excited with a focused laser beam at normal incidence to a plane metal film. No protrusions or holes are needed in this excitation scheme. Depending on the axial position of the focus, the intensity distribution on the metal surface is either dominated by interferences between counterpropagating plasmons or by a two-lobe pattern characteristic of localized surface plasmon excitation. Our experiments can be accurately explained by use of the angular spectrum representation and provide a simple means for locally exciting standing surface plasmon polaritons.

Plasmonic Stripes in Aqueous Environment Co-Integrated With Si3N4 Photonics

2018

We demonstrate the design, fabrication, and the experimental characterization of gold-based plasmonic stripes butt-coupled with low-pressure-chemical-vapor-deposition (LPCVD)-based Si3N4 waveguides for the excitation of surface-plasmon-polariton (SPP) modes in aqueous environment. Plasmonic gold stripes, in aqueous environment, with cross-sectional dimensions of 100 nm × 7 μm were interfaced with 360 nm × 800 nm Si3N4 waveguides cladded with low-temperature-oxide, exploiting linear photonic tapers with appropriate vertical (VO) and longitudinal (LO) offsets between the plasmonic and photonic waveguide facets. An interface insertion loss of 2.3 ± 0.3 dB and a plas…

Computation of near field diffraction by a dielectric grating: a comparison with experiments

1995

We use an eigenmode method to compute the near field diffracted by one-dimensional dielectric gratings. We present a set of easily programmable recurrence relations that give the diffracted field from the incident one. The numerical results are compared with the experimental images obtained with the Photon Scanning Tunneling Microscope (PSTM).

Near-field characterization of plasmon polariton propagation along periodically nano-structured metal thin films

2007

We operate a near-field optical microscope to investigate the properties of periodically nano-structured metal thin films designed to control at the micron scale the propagation or the excitation of surface plasmon polaritons.

Low energy routing platforms for optical interconnects using active plasmonics integrated with Silicon Photonics

2013

Power consumption and bandwidth of electronics appear as the main set of technology barriers in next-generation Data Center and High-Performance Computing (HPC) environments. The limited capacity and pitch lane of electrically wired interconnects require the development of new disruptive technologies to cope with the massive amount of data moving across all hierarchical communication levels, namely rack-to-rack, backplane, chip-to-chip and even on-chip interconnections. Plasmonics comes indeed as a disruptive technology that enables seamless interoperability between light beams and electronic control signals through the underlying metallic layer, providing thereby an inherent energy-efficie…

Excitation of a one-dimensional evanescent wave by conical edge diffraction of surface plasmon

2011

International audience; The experimental observation of a one-dimensional evanescent wave supported by a 90◦ metal edge is reported. Through a measurement of in-plane momenta, we clearly demonstrate the dimensional character of this surface wave and show that it is non-radiative in the superstrate. Excitation conditions, lateral extension and polarization properties of this wave are discussed. Finally, we explore the effect of the surrounding dielectric medium and demonstrate that a single edge can sustain distinct excitations.

Modulation of surface plasmon coupling-in by one-dimensional surface corrugation

2008

Surface plasmon-polaritons have recently attracted renewed interest in the scientific community for their potential in sub-wavelength optics, light generation and non-destructive sensing. Given that they cannot be directly excited by freely propagating light due to their intrinsical binding to the metal surface, the light-plasmon coupling efficiency becomes of crucial importance for the success of any plasmonic device. Here we present a comprehensive study on the modulation (enhancement or suppression) of such coupling efficiency by means of one-dimensional surface corrugation. Our approach is based on simple wave interference and enables us to make quantitative predictions which have been …

Theoretical principles of near-field optical microscopies and spectroscopies

2000

International audience; This paper deals with the principles of detection of optical signals near a surface in a manner permitting the mapping of the distribution of the fields close to various kinds of illuminated samples. We begin with a discussion of the main physical properties of the optical fields near a surface in the absence of any probe tip. This mainly concerns phenomena involving evanescent waves for which the local decay lengths are governed not only by the sizes but also by the intrinsic properties of the surface structures. The interpretation of the detection process is reviewed on the basis of a discussion about the possibility of establishing direct comparisons between exper…

Differential method for modelling dielectric-loaded surface plasmon polariton waveguides

2008

International audience; This paper demonstrates the efficiency of the differential method, a conventional grating theory, to investigate dielectric loaded surface plasmon polariton waveguides (DLSPPWs), known to be a potential solution for optical interconnects. The method is used to obtain the mode effective indices (both real and imaginary parts) and the mode profiles. The results obtained with the differential method are found to be in good agreement with those provided by the effective index method or finite elements. The versatility of the differential method is demonstrated by considering complex configurations such as trapezoidal waveguides or DLSPPWs lying on a finite width metal st…

Near-field optical contrasts in the Fresnel evanescent wave

1998

The surface waves generated by total internal reflection at the surface of a transparent material may be viewed as quasi-two-dimensional, because they decay exponentially in the direction normal to the sample surface. These waves are appropriate to analyze polarization effects associated with light confinement phenomena in near-field optics. In this paper we derive four useful analytical relations governing the near-field contrast around dielectric nanometer-sized particles versus a limited number of external parameters. In the $p$-polarized mode, unlike to what happens with the electric near field, we show that the magnitude of the magnetic near-field contrast can be adjusted by increasing…

Scaling the Sensitivity of Integrated Plasmo-Photonic Interferometric Sensors

2019

We present a new optical biosensing integration approach with multifunctional capabilities using plasmonic and photonic components on the same chip and a new methodology to design interferometric b...

Modelling resonant coupling between microring resonators addressed by optical evanescent waves

2004

In this paper we study the properties of microring resonator structures fabricated with high-index-of-refraction dielectric material. These structures concentrate light and can produce very strong optical potential gradients. They are of great interest for the trapping, manipulation and transport of cold atoms near surfaces. The study consists of two parts: in the first part we investigate the symmetry properties of the resonator response for simple models of the microring structures. In the second part we present detailed numerical calculations of the actual spectra for realistic microfabricated structures. We employ the direct space integral equation method (DSIEM). This method, based on …

Titanium dioxide waveguides for supercontinuum generation and optical transmissions in the near-and mid-infrared

2019

International audience; We report the development of titanium dioxide-based waveguides for applications in the near-and mid-infrared. Thanks to embedded metal grating couplers, we demonstrate error free 10 Gbit/s optical transmissions at 1.55 and 2 µm. With additional management of the dispersion profile, we also demonstrate octave spanning supercontinuum in cm-long TiO2 waveguides.

Imaging the Local Density of States of Optical Corrals

2002

International audience; This paper reports the experimental observation, at optical frequencies, of the electromagnetic local density of states established by nanostructures corresponding to the recently introduced concept of optical corral [G. Colas des Francs et al., Phys. Rev. Lett. 86, 4950 (2001)]. The images obtained by a scanning near-field optical microscope under specific operational conditions are found in agreement with the theoretical maps of the optical local density of states. A clear functionality of detection by the scanning near-field optical microscope is thereby identified since the theoretical maps are computed without including any specific tip model.

Computation of the field diffracted by a local surface defect: application to tip–sample interaction in the photon scanning tunneling microscope

1996

We use a method based on the Fourier transform of the electromagnetic field to compute the field diffracted by a local deformation of a plane boundary surface. We give a complete development of each step of the technique. To show the interaction that exists between the probe of a near-field optical microscope and the observed sample, we use the model of a truncated cone-shaped tip above a rectangular surface defect. We compute the electrical intensity along a line located between the tip and the local surface defect. We show the influence of the polarization of the incident wave and the effect of the position of the tip with respect to the position of the surface defect.

Spatial Distribution of the Nonlinear Photoluminescence in Au Nanowires

2019

When gold nanowires are excited with a tightly focused femtosecond laser a distributed nonlinear photoluminescence (N-PL) develops throughout the entire structure. A complete spaced-resolved analysis of the spectral signature of the nanowire nonlinear response is carried out to understand the origin of the distributed nonlinear response. We discuss various mechanisms to explain the experimental data and unambiguously demonstrate that the spatial and spectral extension of the N-PL in the nanowire are mainly dictated by the propagation of a surface plasmon excited at the pump wavelength. We also present experimental signature of near-field excitation of a broadband continuum of surface plasmo…

Surface plasmon routing in dielectric-loaded surface plasmon polariton waveguides - art. no. 70330S

2008

International audience; Waveguiding by dielectric-loaded surface plasmon-polaritons (DLSPP) structures are numerically and experimentally investigated. We used the effective index model to understand the influence of basic waveguide parameters such as width and thickness on the properties of the surface plasmon guided modes. A waveguide was fabricated and experimentally studied. The effective indices of the modes supported by the waveguide and their propagation length are evaluated by leakage radiation microscopy in both the Fourier and imaging planes. Several excitation schemes were tested including surface plasmon coupling by diascopic or episcopic illumination as well as defect-mediated …

Ultracompact and Low-Power Plasmonic MZI Switch Using Cyclomer Loading

2015

We present a $2\times 2$ hybrid silicon-plasmonic thermooptic (TO) asymmetric Mach–Zehnder interferometric (MZI) switch having only 40- $\mu \text{m}$ long active cyclomer-loaded plasmonic phase arms. It requires less than 12 mW of power and has 2/5- $\mu \text{s}$ ON/OFF-times, respectively, a modulation depth higher than 90% and a 13.2-dB extinction ratio. Data traffic evaluation has been carried out using 10-Gb/s nonreturn-to-zero streams, yielding error-free operation at both switching states with power penalties ranging between 1 to 4.8 dB. The use of the cyclomer loading having a higher TO coefficient than polymethyl methacrylate has resulted to the smallest footprint among plasmonic …

Supercontinuum generation in titanium dioxide waveguides

2019

International audience; Optical supercontinua are a fundamental topic that has stimulated a tremendous practical interest since the early works of Alfano et al. in the 70’s in bulk components. Photonic crystal fibers have then brought some remarkable potentialities in tailoring the dispersive properties of a waveguide while maintaining a high level of confinement over significant propagation distances. The next breakthrough is to further reduce the footprint of the nonlinear component and to achieve the generation of optical supercontinuum on a photonic chip. To reach this aim, several platforms have been successfully investigated such as silicon, silicon germanium, silicon nitride, chalcog…

Demonstration of high speed optical transmission at 2 µm in various material based waveguides

2018

International audience

Octave-spanning supercontinuum generation in titanium dioxide waveguides

2018

International audience

Le dioxyde de titane pour la photonique

2021

National audience

High speed optical transmission at 2 µm in subwavelength waveguides made of various materials

2018

International audience