Trapping Amorphous Intermediates of Carbonates – A Combined Total Scattering and NMR Study

Crystallization via metastable phases plays an important role in chemical manufacturing, biomineralization, and protein crystallization, but the kinetic pathways leading from metastable phases to the stable crystalline modifications are not well understood. In particular, the fast crystallization of amorphous intermediates makes a detailed characterization challenging. To circumvent this problem, we devised a system that allows trapping and stabilizing the amorphous intermediates of representative carbonates (calcium, strontium, barium, manganese, and cadmium). The long-term stabilization of these transient species enabled a detailed investigation of their composition, structure, and morpho…

Anhydrous Amorphous Calcium Oxalate Nanoparticles from Ionic Liquids: Stable Crystallization Intermediates in the Formation of Whewellite

The mechanisms by which amorphous intermediates transform into crystalline materials are not well understood. To test the viability and the limits of the classical crystallization, new model systems for crystallization are needed. With a view to elucidating the formation of an amorphous precursor and its subsequent crystallization, the crystallization of calcium oxalate, a biomineral widely occurring in plants, is investigated. Amorphous calcium oxalate (ACO) precipitated from an aqueous solution is described as a hydrated metastable phase, as often observed during low-temperature inorganic synthesis and biomineralization. In the presence of water, ACO rapidly transforms into hydrated whewe…

Synthesis of Au, Ag, and Au–Ag Bimetallic Nanoparticles Using Pulicaria undulata Extract and Their Catalytic Activity for the Reduction of 4-Nitrophenol

Plant extract of Pulicaria undulata (L.) was used as both reducing agent and stabilizing ligand for the rapid and green synthesis of gold (Au), silver (Ag), and gold&ndash

27Al NMR Study of the pH Dependent Hydrolysis Products of Al2(SO4)3 in Different Physiological Media

Soluble inorganic aluminium compounds like aluminium sulfate or aluminium chloride have been challenged by the European Chemical Agency to induce germ cell mutagenicity. Before conducting mutagenicity tests, the hydrolysis products in water and in physiological solutions should be determined as a function of the concentration and pH. We used different 27Al NMR spectroscopic techniques (heteronuclear Overhauser effect spectroscopy (HOESY), exchange spectroscopy (EXSY), diffusion ordered (DOSY)) in this work to gain the information to study the aluminium species in solutions with Al2(SO4)3 concentrations of 50.0, 5.0, and 0.5 g/L and their pH and time dependent transformation. At low pH, thre…

Die Reaktion von Neopentyllithium mit Kalium-tert -butoxid: Bildung einer alkanlöslichen Lochmann-Schlosser-Superbase

Gemische aus Alkyllithium und Alkoxiden der schweren Alkalimetalle eignen sich zur Herstellung der entsprechenden Alkylverbindungen. Sie zeichnen sich ebenfalls durch ihre Reaktivitat bei Metallierungsreaktionen aus. Diese metallorganischen Mischungen werden oft als LiC-KOR-Superbasen bezeichnet, doch trotz vieler Bemuhungen ist nur wenig uber ihren Aufbau bekannt. Hier werden dimetallische Alkalimetall-Alkyl/Alkoxy-Verbindungen vorgestellt, die durch die Reaktion von Neopentyllithium und Kalium-tert-butoxid gebildet werden. Dank guter Loslichkeit in Alkanen und Temperaturbestandigkeit der Neopentylverbindungen konnten die Losungen in n-Hexan bei Umgebungstemperatur gehandhabt werden und er…

Combining Neopentyllithium with Potassium tert-Butoxide: Formation of an Alkane-Soluble Lochmann-Schlosser Superbase.

Mixtures of alkyllithium and heavier alkali-metal alkoxides are often used to form alkyl compounds of heavier alkali metals, but these mixtures are also known for their high reactivity in deprotonative metalation reactions. These organometallic mixtures are often called LiC-KOR superbases, but despite many efforts their constitution remains unknown. Herein we present mixed alkali-metal alkyl/alkoxy compounds produced by reaction of neopentyllithium with potassium tert-butoxide. The key to success was the good solubility and temperature-stability of neopentyl alkali-metal compounds, leading to hexane-soluble mixtures, which allowed handling at ambient temperatures and isolation by crystalliz…

Multistep Crystallization Pathways in the Ambient‐Temperature Synthesis of a New Alkali‐Activated Binder

Mechanochemical Access to Defect-Stabilized Amorphous Calcium Carbonate

Amorphous calcium carbonate (ACC) is an important precursor in the biomineralization of crystalline CaCO3. The lifetime of transient ACC in nature is regulated by an organic matrix, to use it as an intermediate storage buffer or as a permanent structural element. The relevance of ACC in material science is related to our understanding of CaCO3 crystallization pathways. ACC can be obtained by liquid–liquid phase separation, and it is typically stabilized with the help of macromolecules. We have prepared ACC by milling calcite in a planetary ball mill. The ball-milled amorphous calcium carbonate (BM-ACC) was stabilized with small amounts of Na2CO3. The addition of foreign ions in form of Na2C…

Hydrothermal growth mechanism of SnO2 nanorods in aqueous HCl

Abstract Rutile-type nanorods of SnO2 were obtained in a one-pot hydrothermal synthesis starting from SnCl4·5H2O and HCl in a temperature range between 200 and 240°C. Although the nanorods are polydisperse, the average length of the nanorods could be adjusted from 13 to 65 nm by varying of the reaction temperature. The resulting anisotropic nanocrystals were characterized using powder X-ray diffraction (PXRD), (high resolution-) transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED). The particle growth proceeds via a dissolution-recrystallization process with soluble [SnCl5(H2O)]− intermediates, as confirmed by PXRD, Raman spectroscopy, and magic angle spi…

Polycationic Monomeric and Homodimeric Asymmetric Monomethine Cyanine Dyes with Hydroxypropyl Functionality—Strong Affinity Nucleic Acids Binders

New analogs of the commercial asymmetric monomethine cyanine dyes thiazole orange (TO) and thiazole orange homodimer (TOTO) with hydroxypropyl functionality were synthesized and their properties in the presence of different nucleic acids were studied. The novel compounds showed strong, micromolar and submicromolar affinities to all examined DNA ds-polynucleotides and poly rA–poly rU. The compounds studied showed selectivity towards GC-DNA base pairs over AT-DNA, which included both binding affinity and a strong fluorescence response. CD titrations showed aggregation along the polynucleotide with well-defined supramolecular chirality. The single dipyridinium-bridged dimer showed intercalatio…

Cell adhesion on UV-crosslinked polyurethane gels with adjustable mechanical strength and thermoresponsiveness

Temperature-responsive polyurethane (PU) hydrogels represent a versatile material platform for modern tissue engineering and biomedical applications. However, besides intrinsic advantages such as high mechanical strength and a hydrolysable backbone composition, plain PU materials are generally lacking bio-adhesive properties. To overcome this shortcoming, the authors focus on the synthesis of thermoresponsive PU hydrogels with variable mechanical and cell adhesive properties obtained from linear precursor PUs based on poly(ethylene glycol)s (pEG) with different molar masses, isophorone diisocyanate, and a dimerizable dimethylmaleimide (DMMI)-diol. The cloud point temperatures of the dilute,…

Gram-scale selective synthesis of WO3−x nanorods and (NH4)xWO3 ammonium tungsten bronzes with tunable plasmonic properties

Localized surface plasmon resonance properties in unconventional materials like metal oxides or chalcogenide semiconductors have been studied for use in signal detection and analysis in biomedicine and photocatalysis. We devised a selective synthesis of the tungsten oxides WO3-x and (NH4)xWO3 with tunable plasmonic properties. We selectively synthesized WO3-x nanorods with different aspect ratios and hexagonal tungsten bronzes (NH4)xWO3 as truncated nanocubes starting from ammonium metatungstate (NH4)6H2W12O40·xH2O. Both particles form from the same nuclei at temperatures >200 °C; monomer concentration and surfactant ratio are essential variables for phase selection. (NH4)xWO3 was the prefe…

Polymer-Functionalised Nanograins of Mg-Doped Amorphous Calcium Carbonate via a Flow-Chemistry Approach

Calcareous biominerals typically feature a hybrid nanogranular structure consisting of calcium carbonate nanograins coated with organic matrices. This nanogranular organisation has a beneficial effect on the functionality of these bioceramics. In this feasibility study, we successfully employed a flow-chemistry approach to precipitate Mg-doped amorphous calcium carbonate particles functionalized by negatively charged polyelectrolytes&mdash

Single nanogranules preserve intracrystalline amorphicity in biominerals.

We revisit the ultrastructural features of different calcareous biominerals and identify remarkable similarities: taxonomically very distant species show a common nanogranular structure, even if different extracellular secretion patterns are employed or calcium carbonate polymorphs formed. By these analyses, we elucidate the locus of the small fraction of intracrystalline organic matrix revealing its intergranular character and localize the intracrystalline amorphous calcium carbonate moiety commonly found in mesocrystalline biominerals and provide a first explanation for the pathway by which it is preserved.

Nonclassical crystallization in vivo et in vitro (I): Process-structure-property relationships of nanogranular biominerals.

A distinct nanogranular fine structure is shared by a wealth of biominerals from several species, classes and taxa. This nanoscopic organization affects the properties and behavior of the biogenic ceramic material and confers on them attributes that are essential to their function. We present a set of structure-relationship properties that are rooted in the nanogranular organization and we propose that they rest on a common pathway of formation, a colloid-driven and hence nonclassical mode of crystallization. With this common modus operandi, we reveal the most fundamental and wide spread process-structure-property relationship in biominerals. With the recent increase in our understanding of…

Monitoring Thiol–Ligand Exchange on Au Nanoparticle Surfaces

Surface functionalization of nanoparticles (NPs) plays a crucial role in particle solubility and reactivity. It is vital for particle nucleation and growth as well as for catalysis. This raises the quest for functionalization efficiency and new approaches to probe the degree of surface coverage. We present an (in situ) proton nuclear magnetic resonance (1H NMR) study on the ligand exchange of oleylamine by 1-octadecanethiol as a function of the particle size and repeated functionalization on Au NPs. Ligand exchange is an equilibrium reaction associated with Nernst distribution, which often leads to incomplete surface functionalization following “standard” literature protocols. Here, we show…

Pseudomorphic transformation of amorphous calcium carbonate films follows spherulitic growth mechanisms and can give rise to crystal lattice tilting

Amorphous calcium carbonate films synthesized by the polymer-induced liquid-precursor (PILP) process convert into crystallographically complex calcite spherulites. Tuning the experimental parameters allows for the generation of crystal lattice tilting similar to that found in calcareous biominerals. This contribution evidences the role of spherulitic growth mechanisms in pseudomorphic transformations of calcium carbonate.

Supramolecular Linear-g-Hyperbranched Graft Polymers: Topology and Binding Strength of Hyperbranched Side Chains

Complex, reversible hyperbranched graft polymer topologies have been obtained by spontaneous self-assembly. Well-defined adamantyl- and β-cyclodextrin-functionalized polymers were employed to generate linear-g-(linear–hyperbranched) supramolecular graft terpolymers. For this purpose the synthesis of monoadamantyl-functionalized linear polyglycerols (Ada-linPG) and hyperbranched polyglycerols (Ada-hbPG) as well as poly(ethylene glycol)-block-linear polyglycerol (Ada-PEG-b-linPG) and poly(ethylene glycol)-block-hyperbranched poly(glycerol) (Ada-PEG-b-hbPG) block copolymers was established. Isothermal titration calorimetry (ITC) with β-cyclodextrin revealed a shielding effect of hyperbranched …

A Generalized Method for High‐Speed Fluorination of Metal Oxides by Spark Plasma Sintering Yields Ta 3 O 7 F and TaO 2 F with High Photocatalytic Activity for Oxygen Evolution from Water

A general method to carry out the fluorination of metal oxides with poly(tetrafluoroethylene) (PTFE, Teflon) waste by spark plasma sintering (SPS) on a minute scale with Teflon is reported. The potential of this new approach is highlighted by the following results. i) The tantalum oxyfluorides Ta3 O7 F and TaO2 F are obtained from plastic scrap without using toxic or caustic chemicals for fluorination. ii) Short reaction times (minutes rather than days) reduce the process time the energy costs by almost three orders of magnitude. iii) The oxyfluorides Ta3 O7 F and TaO2 F are produced in gram amounts of nanoparticles. Their synthesis can be upscaled to the kg range with industrial sintering …

Systematical, experimental investigations on LiMgZ (Z= P, As, Sb) wide band gap semiconductors

This work reports on the experimental investigation of the wide band gap compounds LiMgZ (Z = P, As, Sb), which are promising candidates for opto-electronics and anode materials for Lithium batteries. The compounds crystallize in the cubic (C1_b) MgAgAs structure (space group F-43m). The polycrystalline samples were synthesized by solid state reaction methods. X-ray and neutron diffraction measurements show a homogeneous, single-phased samples. The electronic properties were studied using the direct current (DC) method. Additionally UV-VIS diffuse reflectance spectra were recorded in order to investigate the band gap nature. The measurements show that all compounds exhibit semiconducting be…

Monitoring a Mechanochemical Reaction Reveals the Formation of a New ACC Defect Variant Containing the HCO 3 – Anion Encapsulated by an Amorphous Matrix

Crystal growth & design 20(10), 6831 - 6846 (2020). doi:10.1021/acs.cgd.0c00912

Insights into the In Vitro Formation of Apatite from Mg‐Stabilized Amorphous Calcium Carbonate

Rational Design of Thermoresponsive Microgel Templates with Polydopamine Surface Coating for Microtissue Applications.

Functional microgels provide a versatile basis for synthetic in vitro platforms as alternatives to animal experiments. The tuning of the physical, chemical, and biological properties of synthetic microgels can be achieved by blending suitable polymers and formulating them such to reflect the heterogenous and complex nature of biological tissues. Based on this premise, this paper introduces the development of volume-switchable core-shell microgels as 3D templates to enable cell growth for microtissue applications, using a systematic approach to tune the microgel properties based on a deep conceptual and practical understanding. Microscopic microgel design, such as the tailoring of the microg…

Polysiloxane-backbone block copolymers in a one-pot synthesis: a silicone platform for facile functionalization.

Block copolymers consisting exclusively of a silicon-oxygen backbone are synthesized by sequential anionic ring-opening polymerization of different cyclic siloxane monomers. After formation of a poly(dimethylsiloxane) (PDMS) block by butyllithium-initiated polymerization of D3, a functional second block is generated by subsequent addition of tetramethyl tetravinyl cyclotetrasiloxane (D4(V) ), resulting in diblock copolymers comprised a simple PDMS block and a functional poly(methylvinylsiloxane) (PMVS) block. Polymers of varying block length ratios were obtained and characterized. The vinyl groups of the second block can be easily modified with a variety of side chains using hydrosilylation…

Glycine-functionalized copper(ii) hydroxide nanoparticles with high intrinsic superoxide dismutase activity

Superoxide dismutases (SOD) are a group of enzymes that catalyze the dismutation of superoxide (O2−) radicals into molecular oxygen (O2) and H2O2 as a first line of defense against oxidative stress. Here, we show that glycine-functionalized copper(II) hydroxide nanoparticles (Gly-Cu(OH)2 NPs) are functional SOD mimics, whereas bulk Cu(OH)2 is insoluble in water and catalytically inactive. In contrast, Gly-Cu(OH)2 NPs form water-dispersible mesocrystals with a SOD-like activity that is larger than that of their natural CuZn enzyme counterpart. Based on this finding, we devised an application where Gly-Cu(OH)2 NPs were incorporated into cigarette filters. Cigarette smoke contains high concent…

Solid State Fluorination on the Minute Scale: Synthesis of WO 3− x F x with Photocatalytic Activity

Hydrogen Bonding in Amorphous Alkaline Earth Carbonates

Amorphous intermediates play a crucial role during the crystallization of alkaline earth carbonates. We synthesized amorphous carbonates of magnesium, calcium, strontium, and barium from methanolic solution. The local environment of water and the strength of hydrogen bonding in these hydrated modifications were probed with Fourier transform IR spectroscopy,

Magneli-type tungsten oxide nanorods as catalysts for the selective oxidation of organic sulfides

Selective oxidation of thioethers is an important reaction to obtain sulfoxides as synthetic intermediates for applications in the chemical industry, medicinal chemistry and biology or the destruction of warfare agents. The reduced Magneli-type tungsten oxide WO3−x possesses a unique oxidase-like activity which facilitates the oxidation of thioethers to the corresponding sulfoxides. More than 90% of the model system methylphenylsulfide could be converted to the sulfoxide with a selectivity of 98% at room temperature within 30 minutes, whereas oxidation to the corresponding sulfone was on a time scale of days. The concentration of the catalyst had a significant impact on the reaction rate. R…

Calcium Sulfate Nanoparticles with Unusual Dispersibility in Organic Solvents for Transparent Film Processing

Calcium sulfate is one of the most important construction materials. Today it is employed as high-performance compound in medical applications and cement mixtures. We report a synthesis for calcium sulfate nanoparticles with outstanding dispersibility properties in organic solvents without further functionalization. The nanoparticles (amorphous with small γ-anhydrite crystallites, 5–50 nm particle size) form long-term stable dispersions in acetone without any sign of precipitation. 1H NMR spectroscopic techniques and Fourier-transform infrared spectroscopy (FTIR) reveal absorbed 2-propanol on the particle surfaces that induce the unusual dispersibility. Adding water to the nanoparticle disp…

Mixed Ligand Shell Formation upon Catechol Ligand Adsorption on Hydrophobic TiO2 Nanoparticles

Modifying the surfaces of metal oxide nanoparticles (NPs) with monolayers of ligands provides a simple and direct method to generate multifunctional coatings by altering their surface properties. T...

(1-Adamantyl)methyl glycidyl ether: a versatile building block for living polymerization.

(1-Adamantyl)methyl glycidyl ether (AdaGE) is introduced as a versatile monomer for oxyanionic polymerization, enabling controlled incorporation of adamantyl moieties in aliphatic polyethers. Via copolymerization with ethoxyethyl glycidyl ether (EEGE) and subsequent cleavage of the acetal protection groups of EEGE, hydrophilic linear polyglycerols with an adjustable amount of pendant adamantyl moieties are obtained. The adamantyl unit permits control over thermal properties and solubility profile of these polymers (LCST). Additionally, AdaGE is utilized as a termination agent in carbanionic polymerization, affording adamantyl-terminated polymers. Using these structures as macroinitiators fo…

Batch-to-Melt Conversion Kinetics in Sodium Aluminosilicate Batches Using Different Alumina Raw Materials

The batch-to-melt conversion in batches of sand, soda ash and corundum (C), alumina spinel (A), boehmite (B), or gibbsite (G) as Al2O3 carrier are studied using thermal analysis, X-ray diffraction, and 27Al nuclear magnetic resonance spectroscopy. Laboratory-scaled batches are either heated continuously or quenched from 1600°C in a series of increasing dwell times. The results show that the conversion from the raw materials to the fresh melt proceeds in two kinetic stages. During the first stage (3–5 min), fast conversion of nearly 95% by mass occurs and the conversion coefficient increases in the order G < C ≈ A < B. The second stage is controlled by the slow dissolution of intermediate cr…

High-speed solid state fluorination of Nb2O5 yields NbO2F and Nb3O7F with photocatalytic activity for oxygen evolution from water

Solid state reactions are slow because the diffusion of atoms or ions through the reactant, intermediate and crystalline product phases is the rate-limiting step. This requires days or even weeks of high temperature treatment, and consumption of large amounts of energy. We employed spark-plasma sintering, an engineering technique that is used for high-speed consolidation of powders with a pulsed electric current passing through the sample to carry out the fluorination of niobium oxide in minute intervals. The approach saves time and large amounts of waste energy. Moreover, it allows the preparation of fluorinated niobium oxides on a gram scale using poly(tetrafluoroethylene) (®Teflon) scrap…

CCDC 1455868: Experimental Crystal Structure Determination

Related Article: Philipp Benrath, Maximilian Kaiser, Thomas Limbach, Mihail Mondeshki and Jan Klett|2016|Angew.Chem.,Int.Ed.|55|10886|doi:10.1002/anie.201602792

CCDC 1455867: Experimental Crystal Structure Determination

Related Article: Philipp Benrath, Maximilian Kaiser, Thomas Limbach, Mihail Mondeshki and Jan Klett|2016|Angew.Chem.,Int.Ed.|55|10886|doi:10.1002/anie.201602792