Search results for " AGRICULTURE"
showing 10 items of 2212 documents
Characterization and Processability of Blends of Polylactide Acid with a New Biodegradable Medium-Chain-Length Polyhydroxyalkanoate
2015
In this work the processability and the mechanical performance of polylactide acid (PLA) based blends with a sample of a new biodegradable medium-chain-length poly (hydroxyalkanoate) (PHA) were investigated. The two polymers are incompatible with scarce adhesion and with the dispersed PHA particles size increasing with the PHA content. Rheological tests in shear flow indicate that adding PHA improves the processability of the matrix by increasing the content of this second component in the blend, as observed also for the torque curves, due to the very low viscosity of this new sample of PHA. The processability is only slightly worsened in non-isothermal elongational flow as the melt strengt…
“Clickable PEG” via anionic copolymerization of ethylene oxide and glycidyl propargyl ether
2017
A straight forward synthesis of poly(ethylene glycol) (PEG) with multiple alkyne groups distributed along the polymer chain is introduced. Direct access to clickable PEG is achieved by the monomer-activated anionic ring-opening copolymerization (AROP) of ethylene oxide (EO) with glycidyl propargyl ether (GPgE). Notably for successful polymerization no protection of the alkyne unit is required owing to the mild reaction conditions. Defined PEG-co-PGPgE and PGPgE (co)polymers with PDIs of 1.18–1.60 and molecular weights of Mn = 3000–9500 g mol−1 were prepared. In situ1H NMR kinetic studies revealed remarkably disparate reactivity ratios of rEO = 14.8 and rGPgE = 0.076, representing a pronounc…
PEO/CHCl3. Crystallinity of the Polymer and Vapor Pressure of the Solvent. Equilibrium and Nonequilibrium Phenomena
2003
Vapor pressures were measured for the system CHCl3/PEO 1000 (PEO stands for poly(ethylene oxide) and 1000 for Mw in kg/mol) at 25 °C as a function of the weight fraction w of the polymer by means of a combination of headspace sampling and gas chromatography. The establishment of thermodynamic equilibria was assisted by employing thin polymer films. The degrees of crystallinity α of the pure PEO and of the solid polymer contained in the mixtures were determined via DSC. An analogous degree of polymer insolubility β was calculated from the vapor pressures measured in this composition range. The experiments demonstrate that both quantities and their concentration dependence are markedly affect…
Synthesis, characterisation and properties of α,β-poly(N-2-hydroxyethyl)-dl-aspartamide-graft-maleic anhydride precursors and their stimuli-responsiv…
2009
Abstract A family of poly(amino acid)-maleic anhydride hydrogels were designed and synthesized. Water soluble polymeric precursors were prepared by partially substituting the hydroxyl groups of the α,β-poly( N -2-hydroxyethyl)- dl -aspartamide backbone with maleic anhydride, so as to provide double bonds for crosslinking and carboxylic acid groups for pH and electric field responsiveness. Reaction conditions (reactive mixture composition and catalysis) were systematically varied in order to obtain PHEA–MA precursors with different and reliable graft-maleic anhydride levels. PHEA–MA precursors were characterised by titration, Nuclear Magnetic Resonance ( 1 H NMR), Fourier-Transformed Infrare…
Comparison of living polymerization systems
1994
Recent developments in the field of living polymerization are surveyed. Comparison of the available mechanistic and kinetic information is made for living anionic, cationic, free radical, group transfer, ring-opening metathesis, Ziegler-Natta and immortal polymerizations. This evaluation indicates that the majority of living polymerizations involve quasiliving equilibrium between active (propagating) and dormant (nonpropagating) polymer chains. On the basis of the kinetics of a general model for quasiliving and ideal living polymerizations it is concluded that ideal living polymerization is a special subclass of quasiliving polymerizations. Classification of living polymerization systems is…
Supramolecular Linear-g-Hyperbranched Graft Polymers: Topology and Binding Strength of Hyperbranched Side Chains
2013
Complex, reversible hyperbranched graft polymer topologies have been obtained by spontaneous self-assembly. Well-defined adamantyl- and β-cyclodextrin-functionalized polymers were employed to generate linear-g-(linear–hyperbranched) supramolecular graft terpolymers. For this purpose the synthesis of monoadamantyl-functionalized linear polyglycerols (Ada-linPG) and hyperbranched polyglycerols (Ada-hbPG) as well as poly(ethylene glycol)-block-linear polyglycerol (Ada-PEG-b-linPG) and poly(ethylene glycol)-block-hyperbranched poly(glycerol) (Ada-PEG-b-hbPG) block copolymers was established. Isothermal titration calorimetry (ITC) with β-cyclodextrin revealed a shielding effect of hyperbranched …
Synthesis and characterization of water-swellable?,?-polyasparthydrazide derivatives
1995
α, β-polyasparthydrazide (PAHy) was crosslinked by glutaraldehyde to form water-swellable materials possessing a three-dimensional molecular network. Different crosslinking degrees were prepared varying glutaraldehyde/PAHy ratio and samples containing 5-fluorouracil were obtained by incorporating the drug into the polymer networks during the crosslinking reaction. All samples were characterized by swelling tests, thermal, x-ray and SEM analysis. Their microstructure was observed through scanning electron microscopy. Furthermore, for samples containing the anticancer drug,in vitro release studies were performed in pH 7.4 buffer solution.
Aqueous Laponite Clay Dispersions in the Presence of Poly(ethylene oxide) or Poly(propylene oxide) Oligomers and their Triblock Copolymers
2008
The effect of polyethylene oxide (PEO) or polypropylene oxide (PPO) oligomers of various molecular weight (Mw) as well as of triblock copolymers, based on PEO and PPO blocks, on aqueous laponite RD suspensions was studied with small-angle neutron scattering (SANS). The radius of gyration (RG) increases for low Mw whereas the opposite occurs for larger Mw. This behavior is explained on the-basis that an effective RG is given by two contributions: (1) the size of the particles coated with the polymer and (2) the interactions between the laponite RD particles which are attractive for small and repulsive for large polymers. The SANS curves in the whole Q-range are well described by a model of n…
Multivalent ion-exchange model of biopolymer chromatography for mass overload conditions
1991
Abstract The simple model of multivalent ion-exchange biopolymer chromatography is analyzed on the basis of classical quasi-chemical temperature. The rigorous isotherm equation deduced from the stoichiometric displacement model (SDM) was used to stimulate the migration of a solute through the chromatographic column in the isocratic and gradient elution modes. The peak profiles generated for various sample sizes were compared with those obtained on the basis of a Langmuir isotherm. Peak tailing increases with the value of the exponent Z, defined as the ratio of the protein valency to the displacing counter-ion valency. For large Z the asymmetries due to the non-linearity of the isotherm are …
Rheological behaviour, filmability and mechanical properties of biodegradable polymer films
2014
The rheological properties in shear flow and non isothermal elongational flow of two biodegradable polymers, belonging to two different classes of materials, have been measured and compared with those of a film blowing grade high density polyethylene in order to assess the filmability of these polymers. The mechanical properties of isotropic and anisotropic samples have been also reported.