Search results for " Accuracy"

Feasibility of Coulomb blockade thermometry in metrology

2000

Abstract Coulomb blockade thermometer (CBT) is a simple, magnetic-field-independent primary thermometer for everyday use at cryogenic temperatures. Its properties are well understood by now. The absolute accuracy at present is about ±0.5%. Recently, we have started studying the possibility of using CBT in metrological applications. We have especially in mind the future extension of the international temperature scale below 0.65 K, which is the lower end of ITS-90. Experiments with arrays containing more than 100 tunnel junctions in series are in progress in order to decrease the effects of electromagnetic environment and of co-tunnelling even below the present level.

One and two dimensional tunnel junction arrays in weak Coulomb blockade regime-absolute accuracy in thermometry

1999

We have investigated one and two dimensional (1D and 2D) arrays of tunnel junctions in partial Coulomb blockade regime. The absolute accuracy of the Coulomb blockade thermometer is influenced by the external impedance of the array, which is not the same in the different topologies of 1D and 2D arrays. We demonstrate, both by experiment and by theoretical calculations in simple geometries, that the 1D structures are better in this respect. Yet in both 1D and 2D, the influence of the environment can be made arbitrarily small by making the array sufficiently large.

Investigation of an entropic stabilizer for the lattice-Boltzmann method

2015

The lattice-Boltzmann (LB) method is commonly used for the simulation of fluid flows at the hydrodynamic level of description. Due to its kinetic theory origins, the standard LB schemes carry more degrees of freedom than strictly needed, e.g., for the approximation of solutions to the Navier-stokes equation. In particular, there is freedom in the details of the so-called collision operator. This aspect was recently utilized when an entropic stabilizer, based on the principle of maximizing local entropy, was proposed for the LB method [I. V. Karlin, F. Bosch, and S. S. Chikatamarla, ¨ Phys. Rev. E 90, 031302(R) (2014)]. The proposed stabilizer can be considered as an add-on or extension to b…

Data quality oriented procedure, for detailed mapping of heavy metals in urban topsoil as an approach to human health risk assessment

2021

Abstract Urban soils' health is important to the community because of the soils' potential use for recreational activities. A data quality-oriented approach to sampling design is proposed for performing soil representative surveys that gives support to defensible and statistically-based decisions. Krowoderski park in Cracow (Poland) was selected as a study case to investigate heavy metals (HMs) accumulation and to assess human risk exposure according to simulated scenarios. Statistical power was computed for optimizing the number of samples to compare HMs concentration against legal upper tolerance levels (LUTL). The samples' location was iteratively designed as random spatial distribution …

An Efficient Numerical Method for Time Domain Computational Electromagnetic Simulation

2018

In this paper an efficient numerical method in approximating the electric and magnetic fields is provided. The method is based on an implicit leapfrog arrangement in time and without mesh in space. Moreover, a projection scheme is introduced in order to improve the accuracy of the proposed approach and applied into the computational electromagnetic (CEM) framework. The PDEs governing the process are solved and some numerical results are reported to validate the numerical process.

Energy-Efficiency and Coverage Quality Management for Reliable Diagnostics in Wireless Sensor Networks

2020

International audience; The processing of data and signals provided by sensors aims at extracting rnrelevant features which can be used to assess and diagnose the health state rnof the monitored targets. Nevertheless, Wireless Sensor Networks (WSNs) present rna number of shortcomings that have an impact on the quality of the gathered rndata at the sink level, leading to imprecise diagnostics rnof the observed targets. To improve data accuracy, two main critical and related issues, namely the energy consumption and coverage quality, need to be considered. The goal is to maximize the network lifetime while guaranteeing the complete coverage of all the targets. Unfortunately, these performance…

Impact of prompt gamma emission of 44Sc on quantification in preclinical and clinical PET systems

2021

Abstract 44Sc is an increasingly investigated positron emitter for use in positron emission tomography (PET) imaging. However, 44Sc is a non-pure positron emitter, since prompt photons are co-emitted during the decay process. This study investigates coincidence energy spectra of 44Sc and its impact on PET quantification on a preclinical and clinical PET system in comparison with 18F. The raw data of the coincidence events revealed characteristic differences comparing the photon energy distribution of 44Sc and 18F. Due to prompt gamma emission of 44Sc, activity recovery is underestimated on PET systems. However, clinical PET imaging of 44Sc with acceptable quantitative accuracy appears feasi…

2021

Purpose First, this experimental study aims at comparing out-of-field doses delivered by three radiotherapy techniques (3DCRT, VMAT (two different accelerators), and tomotherapy) for a pediatric renal treatment. Secondly, the accuracy of treatment planning systems (TPS) for out-of-field calculation is evaluated. Methods EBT3 films were positioned in pediatric phantoms (5 and 10 yr old). They were irradiated according to four plans: 3DCRT (Clinac 2100CS, Varian), VMAT (Clinac 2100CS and Halcyon, Varian), and tomotherapy for a same target volume. 3D dose determination was performed with an in-house Matlab tool using linear interpolation of film measurements. 1D and 3D comparisons were made be…

3D digitization of transparent objects by polalization techniques in IR & by triangulation in UV

2011

Two non-conventional methods for the 3D digitization of transparent objects via non-contact measurement are reported in this thesis. 3D digitization is a well acknowledged technique for opaque objects and various commercial solutions based on different measurement approaches are available in the market offering different types of resolution at different prices. Since these techniques require a diffused or lambertian surface, their application to transparent surfaces fails. Indeed, rays reflected by the transparent surface are perturbed by diverse inter-reflections induced by the refractive properties of the object. Therefore, in industrial applications like quality control, the transparent …

Applications and numerical convergence of the partial inverse method

2006

In 1983, J.E. Spingarn introduced what he called the Partial Inverse Method in the framework of Mathematical Programming. Since his initial articles, numerous applications have been given in various fields including Lagrangian multipliers methods, location theory, convex feasibility problems, analysis of data, economic equilibrium problems. In a first part of this paper we give a survey of these applications. Then by means of optimization problems relevant to location theory such as single and multifacility minimisum or minimax location problems, we examine the main advantages of the algorithm and we point out its drawbacks mainly concerning the rate of convergence. We study how different p…