Search results for " Anode"
showing 10 items of 37 documents
Structural, catalytic and electrical investigation on La1-xSrxCr1-yFeyO3- δ as anodes for IT-SOFCs
2012
Oxidation of carboxylic acids in water at IrO2-Ta2O5 and Boron Doped Diamond anodes
2011
Abstract A detailed study was dedicated to the anodic oxidation of three carboxylic acids (namely, oxalic, formic and maleic acid) with the objective to evaluate in a systematic way the effect on the oxidation of carboxylic acids of numerous relevant parameters, including the nature and the concentration of the carboxylic acid, the alimentation regime (potentiostatic vs. amperostatic), the current density and the working potential values, the flowdynamic regime, the temperature and the nature of the electrode material. It was observed that the effect of some operative parameters strongly depends on the nature of the electrode and of the carboxylic acid. As an example, the efficacy of abatem…
Facile crosslinking of poly(vinylpyrrolidone) by electro-oxidation with IrO2-based anode under potentiostatic conditions
2018
Abstract: The modification of polymer architectures by reaction with chemically adsorbed hydroxyl radicals has been thoroughly investigated by electrolyzing dilute aqueous solutions of the biocompatible polymer poly(vinylpyrrolidone) (PVP), using an undivided electrolytic cell with a Ti/IrO2–Ta2O5(DSA®) anode. Several electrolyses were performed to assess the influence of the applied potential, the circulated charge and the PVP concentration, which was always kept low to avoid chain overlapping. From the results obtained, it can be concluded that the electro-oxidation of PVP solutions using a cheap anode is an effective method to crosslink initially isolated polymer chains, eventually incre…
A new route to grow oxide nanostructures based on metal displacement deposition. Lanthanides oxy/hydroxides growth
2012
Abstract A metal displacement reaction has been used in order to cause precipitation of oxide nanostructures within pores of anodic alumina membrane (AAM) templates. Here, we focus on the displacement deposition of LnO/OH (Ln = La, Ce, Sm, Er) nanostructures using Zn as sacrificial anode, employing a specific cell arrangement where a galvanic couple was formed between zinc anode and the Au thin layer covering template pore bottom. Progress of displacement deposition reaction into template channels was monitored measuring the open circuit potential as well as pH changes of the electrolyte. A progressive de-activation of the anode surface was observed for long deposition times, caused by depo…
Chitosan-Coating Deposition via Galvanic Coupling
2019
A galvanic method to deposit chitosan coatings on stainless steel substrate is reported. Deposition of suitable coatings is desired to improve biocompatibility and corrosion resistance of metallic medical devices to be implanted in human body. In the present work, a thin hydrogel layer of chitosan was deposited on 304SS by a galvanic displacement reaction, which is advantageous first as it does not require external power supply. 304SS was immersed into an aqueous solution of chitosan/lactic acid and electrochemically coupled with magnesium acting as a sacrificial anode. SEM images showed the formation of a uniform layer of chitosan with a thickness controlled by deposition time. Corrosion t…
Reduction of oxygen to H2O2 at carbon felt cathode in undivided cells. Effect of the ratio between the anode and the cathode surfaces and of other op…
2019
Abstract In the last years, the electrochemical conversion of oxygen to hydrogen peroxide at carbon felt has been largely studied in order to define a new route for the production of H2O2 and to optimize the electro-Fenton process, which is based on the cathodic generation of H2O2. In particular, many studies regarding electro-Fenton process were carried out in undivided cells in order to avoid the costs of the separator and to reduce the cell potentials. Hence, in order to optimize the cathodic conversion of oxygen to H2O2 in undivided cells, the effect of many parameters linked to the anodic process were here evaluated. In particular, it was demonstrated that the performances of the proce…
Calcium phosphate/polyvinyl acetate coatings on SS304 via galvanic co-deposition for orthopedic implant applications
2021
Abstract In this work, the galvanic deposition method is used to deposit coatings of brushite/hydroxyapatite/polyvinyl acetate on 304 stainless steel. Coatings are obtained at different temperatures and with different sacrificial anodes, consisting of a mixture of brushite and hydroxyapatite. Samples are aged in a simulated body fluid (SBF), where a complete conversion of brushite into hydroxyapatite with a simultaneous change in morphology and wettability occurred. The corrosion tests show that, compared with bare 304, the coating shifts Ecorr to anodic values and reduces icorr Ecorr, and icorr has different values at different aging times due to chemical interactions at the solid/liquid i…
Nanostructured anode material for Li-ion batteries
2010
The present paper focuses on a nanostructured SnCo alloy electrochemically prepared by template method in view of its use as anode material alternative to graphite in lithium-ion batteries. The fabrication of SnCo nanowire arrays was carried out by potentiostatic co-deposition of the two metals by using nanostructured anodic alumina membranes as template. Electrochemical tests on lithiation-delithiation of these SnCo electrodes in conventional organic electrolyte (EC:DMC LiPF6) at 30°C showed that their specific capacity was stable for about the first 12 cycles at a value near to the theoretical one for Li22Sn5 and, hence, progressively decayed.
SnCo nanowire array as negative electrode for lithium-ion batteries
2011
Abstract Amorphous SnCo alloy nanowires (NWs) grown inside the channels of polycarbonate membranes by potentiostatic codeposition of the two metals (SnCo- PM ) were tested vs. Li by repeated galvanostatic cycles in ethylene carbonate-dimethylcarbonate – LiPF 6 for use as negative electrode in lithium ion batteries. These SnCo electrodes delivered an almost constant capacity value, near to the theoretical for an atomic ratio Li/Sn of 4.4 over more than 35 lithiation–delithiation cycles at 1 C. SEM images of fresh and cycled electrodes showed that nanowires remain partially intact after repeated lithiation–delithiation cycles; indeed, several wires expanded and became porous. Results of amorp…
The influence of aluminium cations on electrocarboxylation processes in undivided cells with Al sacrificial anodes
2005
Abstract The influence of Al cations on the electrochemical carboxylation of acenaphthylene ( 1 ), benzophenone ( 2 ), 6-methoxy-2-acetonaphthone ( 3 ), and benzyl chloride ( 4 ) has been investigated in dimethylformamide at a glassy carbon cathode. The Al 3+ ions were either added at the beginning of the experiment or were released from the anode during electrocarboxylation. It has been found that when Al cations are added to the reaction medium, they strongly influence the reduction process, in most cases leading to a complete change of the mechanism. For example, in the case of 1 , the radical anion ( 1 − ) formed upon 1e − reduction rapidly reacts with Al 3+ to give an Al(III) adduct, w…