Search results for " CIRCUIT"
showing 10 items of 634 documents
Monolithic integration of Giant Magnetoresistance (GMR) devices onto standard processed CMOS dies
2014
Giant Magnetoresistance (GMR) based technology is nowadays the preferred option for low magnetic fields sensing in disciplines such as biotechnology or microelectronics. Their compatibility with standard CMOS processes is currently investigated as a key point for the development of novel applications, requiring compact electronic readout. In this paper, such compatibility has been experimentally studied with two particular non-dedicated CMOS standards: 0.35 μm from AMS (Austria MicroSystems) and 2.5 μm from CNM (Centre Nacional de Microelectrònica, Barcelona) as representative examples. GMR test devices have been designed and fabricated onto processed chips from both technologies. In order …
Volume integrated phase modulator based on funnel waveguides for reconfigurable miniaturized optical circuits.
2015
We demonstrate the integration of a miniaturized 30(x) μm × 30(y) μm × 2.7(z) mm electro-optic phase modulator operating in the near-IR (λ = 980 nm) based on the electro-activation of a funnel waveguide inside a paraelectric sample of photorefractive potassium lithium tantalate niobate. The modulator forms a basic tassel in the realization of miniaturized reconfigurable optical circuits embedded in a single solid-state three-dimensional chip.
SIMULATION OF THERMAL EFFECTS IN OPTOELECTRONIC DEVICES USING COUPLED ENERGY-TRANSPORT AND CIRCUIT MODELS
2008
A coupled model with optoelectronic semiconductor devices in electric circuits is proposed. The circuit is modeled by differential-algebraic equations derived from modified nodal analysis. The transport of charge carriers in the semiconductor devices (laser diode and photo diode) is described by the energy-transport equations for the electron density and temperature, the drift-diffusion equations for the hole density, and the Poisson equation for the electric potential. The generation of photons in the laser diode is modeled by spontaneous and stimulated recombination terms appearing in the transport equations. The devices are coupled to the circuit by the semiconductor current entering the…
Design approach for high efficiency NFC systems with magnetic shielding materials
2020
The performance of a Near Field Communication (NFC) antenna may be diminished when it is placed close to any conductive surface such as a metallic case or a battery. This degradation is caused due to the stray magnetic field created by the eddy currents induced on the surface, which is opposite to the intended field generated by the NFC antenna. One of the first solutions that come to mind to designers when facing this problem is the use of high permeability magnetic shielding based on sintered ferrite sheets. This is a good approach but something that is not generally taken into account is that these materials introduce an additional inductance to the NFC antenna. If the permeability of th…
Switchable surface structured hydrogel coatings
2017
Switchable surface structures based on hydrogels are an emerging field in material science, microfluidics, soft robotics and anti-fouling. Here, we describe a novel method that uses a photo-cross-linkable terpolymer to create a hydrogel coating with a switchable surface structure. The terpolymer is based on poly(N-isopropylacrylamide) (PNIPAm) and it is shown that simple coating technologies like slit die coating can be used under ambient conditions. It is also shown that the swelling ratio of the coating is controlled by the energy dose of ultraviolet (UV) light. Simple and complex surface structures were created using respectively single or multiple UV illumination steps through masks and…
Microwave characterization and modeling of packaged HEMTs by a direct extraction procedure at cryogenic temperatures
2004
In the present work we employ a direct extraction procedure to determine small signal equivalent circuit of microwave GaAs FETs by means of scattering (S-) parameter measurements down to cryogenic temperatures. The direct extraction procedure was tested on packaged AlGaAs/InGaAs HEMTs and good agreement between the simulated and measured S-parameters was obtained at different bias and temperature conditions. We employed a properly designed cryogenic set-up operating in our laboratory that allows to perform DC and RF characterization down to 30 K.
Scalable manufacturing of fibrous nanocomposites for multifunctional liquid sensing
2021
This research is supported by the Advanced Manufacturing Program (No. 1927623) from the National Science Foundation and by the McIntire-Stennis Cooperative Forestry Research Program (No. 1020630) from the USDA National Institute of Food and Agriculture. The authors also thank WestRock Paper Company for donated the wood pulp used in this research. Open access funding is enabled and organized by CERN. Cellulose-based paper electronics is an attractive technology to meet the growing demands for naturally abundant, biocompatible, biodegradable, flexible, inexpensive, lightweight and highly miniaturizable sensory materials. The price reduction of industrial carbon nanotube (CNT) grades offers op…
Surface plasmon subwavelength optics.
2003
International audience; Surface plasmons are waves that propagate along the surface of a conductor. By altering the structure of a metal's surface, the properties of surface plasmons- in particular their interaction with light-can be tailored, which offers the potential for developing new types of photonic device. This could lead to miniaturized photonic circuits with length scales that are much smaller than those currently achieved. Surface plasmons are being explored for their potential in subwavelength optics, data storage, light generation, microscopy and bio-photonics.
Electron-induced limitation of surface plasmon propagation in silver nanowires
2013
Plasmonic circuitry is considered as a promising solution-effective technology for miniaturizing and integrating the next generation of optical nano-devices. A key element is the shared metal network between electrical and optical information enabling an efficient hetero-integration of an electronic control layer and a plasmonic data link. Here, we investigate to what extend surface plasmons and current-carrying electrons interfere in such a shared circuitry. By synchronously recording surface plasmon propagation and electrical output characteristics of single chemically-synthesized silver nanowires we determine the limiting factors hindering the co-propagation of electrical current and sur…
Nanorings and rods interconnected by self-assembly mimicking an artificial network of neurons
2013
[EN] Molecular electronics based on structures ordered as neural networks emerges as the next evolutionary milestone in the construction of nanodevices with unprecedented applications. However, the straightforward formation of geometrically defined and interconnected nanostructures is crucial for the production of electronic circuitry nanoequivalents. Here we report on the molecularly fine-tuned self-assembly of tetrakis-Schiff base compounds into nanosized rings interconnected by unusually large nanorods providing a set of connections that mimic a biological network of neurons. The networks are produced through self-assembly resulting from the molecular conformation and noncovalent intermo…