Search results for " Chemical engineering"
showing 10 items of 2965 documents
Beyond Biodegradability of Poly(lactic acid): Physical and Chemical Stability in Humid Environments
2017
International audience; Poly(lactic acid) (PLA) is the most traded biodegradable and biobased material. It is largely used as ecofriendly substitute of conventional plastics. Nevertheless, one of the main limiting factors is its water sensitivity. PLA reacts with water and is hydrolyzed during time, which determines its performance. Limited information related to the hydrolysis mechanism driven by water in vapor state is available in scientific literature. Literature is mainly focused on the effects of water in liquid state. This lack of information is of significant importance, since PLA interacts with water in both phases. This work was aimed to give a full depiction of the chemical and p…
The influence of the nature of the surface oxide on the adhesive fracture energy of aluminium-bonded joints as measured by T-peel tests
2008
Abstract Modification of aluminium alloy substrates microstructure and morphology by depositing new oxide layers on top of the metal surface has been investigated, with the aim of improving adhesion. The effect of treating the metal with boiling water or immersing it in a cerate bath has been studied by means of electron microscopy, contact angle measurements and peeling tests. The formation of pseudoboehmite layers or cerium conversion coatings both led to an increase in joint's adhesive fracture energy and more durable adhesive bonds with respect to joints obtained with “mechanically grinded only” substrates. Differences in the performance of the bonded joints has been discussed in terms …
Isobaric Vapor−Liquid Equilibrium in the Systems 2,3-Dimethylpentane + Methyl 1,1-Dimethylethyl Ether, + Diisopropyl Ether and + Methyl 1,1-Dimethylp…
1999
New, consistent vapor−liquid equilibrium data for the binary systems 2,3-dimethylpentane + methyl 1,1-dimethylethyl ether, + diisopropyl ether, and + methyl 1,1-dimethylpropyl ether are reported at 101.3 kPa. The measured systems deviate slightly from ideal behavior, and only the system methyl 1,1-dimethylpropyl ether + 2,3-dimethylpentane presents an azeotrope. The activity coefficients for the solutions were correlated with their compositions by the Wilson, UNIQUAC, and NRTL models. Wisniak−Tamir equations were used to correlate the boiling points of the solutions with their compositions.
Liquid gas techniques for GC trace analysis
1990
Liquid gases (LG), i.e. low boiling compounds with vapor pressures below 5 bar at room temperature, are introduced as solvents for trace analyses. A system for preparin, diluting and handling LG solutions safely and conveniently in 5 to 500 μl amounts was developed as well as a syringe for direct injection of μl-LG samples into capillary GC. Even technical grade LG are of high purity. GC/FID of LG solutions (starting at −60°C) allows the separation of volatile traces from the solvent peak: e.g., dichloromethane can be measured in the picogram range.
Favoring alkane primary carbon-hydrogen bond functionalization in supercritical carbon dioxide as reaction medium
2019
The selectivity of a catalytic alkane functionalization process can be modified just changing the reaction medium from neat alkane to supercritical carbon dioxide (scCO2). A silica supported copper complex bearing an Nheterocyclic carbene ligand promotes the functionalization of carbon-hydrogen bonds of alkanes by transferring the CHCO2Et group from N2=CHCO2Et (ethyl diazoacetate, EDA). In neat hexane only 3% of the primary C-H bonds (ethyl heptanoate being the product) are functionalized in that manner, whereas the same reaction carried out in scCO2 provides a 30% yield in this linear ester. Such effect seems to be induced by an electronic density flux from the NHC ligand to the surroundin…
Analytical methods for the characterization and determination of nonionic surfactants in cosmetics and environmental matrices
2013
Nonionic synthetic surfactants, constituted of an assortment of classes, are common ingredients of industrial, household and body-care products. Alone or in combination with anionic surfactants, they perform a variety of functions including cleaning action, emulsification, skin conditioning, appearance and consistency modification, solubilization and dispersing agents. By far fatty alcohol ethoxylates (AEs) and alkylphenol ethoxylates (APEs) are more extensively used than any other nonionic surfactant class; however, works appearing in the literature making reference to the analysis of other nonionic surfactant classes have also been collected in this review. The production volume worldwide…
Organized assemblies of magnetic clusters
2003
Abstract In this work we have explored the possibilities to create layered organizations of the Mn 12 single-molecule magnets using the Langmuir–Blodgett technique or attaching these clusters onto a metal surface by preparing self-assembled monolayers (SAMs). In the first part we discuss the use of the Langmuir–Blodgett (LB) technique in order to obtain organized magnetic films formed by monolayers of these clusters. Two strategies have been used with this aim. The first one consists of mixing Mn 12 acetate or benzoate derivatives with an amphiphile, while the second procedure is based on the use of Mn 12 derivatives specifically designed to form LB films. An alternative method is that of p…
Decomposition of ammonium sulfate residue in a high solid/gas ratio suspension state with an industrial-scale reactor system (production line)
2015
Abstract Ammonium sulfate residue is a particulate solid and is produced during the manufacture of ammonium sulfate fertilizer. The residue used in this study contained a large portion of calcium carbonate, from which active lime (CaO) was recovered via thermal decomposition. We used a purpose-built device to decompose the residue in a semi-suspension state. We found that CaO had the highest activity when residue was decomposed at 850–900 °C. Our experiments indicated that ammonium sulfate residue should be decomposed in a suspension state to produce active CaO. Based on our laboratory test findings, an industrial-scale production line with a high solid/gas ratio in a suspension state was d…
Short-range order and luminescence in amorphous silicon oxynitride
2000
Abstract Using Si 2p core-level X-ray photoelectron spectroscopy, we found that the short-range order in amorphous silicon oxynitride (a-SiOxNy) can be quantitatively described by a random bonding model. Results also show that the second and even further neighbours of the Si in the network affect the chemical shifts of the X-ray photoelectron spectra. Cathodoluminescence and photoluminescence of a-SiOxNy with different compositions are also measured. A red band with energies of 1.8–1.9 eV, a blue band with an energy of 2.7 eV and ultraviolet bands with energies of 13.1, 3.4–3.6, 4.4–4.7 and 5.4eV were observed. The 1.8–1.9 eV band is attributed to the O and N atoms with an unpaired electron…
Glass-forming derivatives of 2-cyano-2-(4H-pyran-4-ylidene) acetate for light-amplification systems
2019
Abstract A series of 2-cyano-2-(4H-pyran-4-ylidene) acetate derivatives with triphenyl and 9H-carbazole moieties were synthesized and investigated, mostly for potential applications in organic solid state lasers. Synthesized compounds show remarkable amorphous film formation ability, tunable thermal properties (thermal stability varies from 190 °C to 387 °C and glass transition temperature from 94 °C up to 141 °C) with light absorption from 400 nm to 600 nm and photoluminescence from 600 nm up to 800 nm. Dyes with incorporated mono-styryl- electron donating fragment (KTB, KTBC and KTB3K) showed higher photoluminescence quantum yield (PLQY) (from 16% up to 23%), significantly lower amplified…