Search results for " Corrosion"

High magnification SEM observations for two types of granularity in a high burnup PWR fuel rim

1998

Abstract Rim microstructure of an UO2 pellet irradiated up to 61 GWd/tU, observed with high magnification scanning electron microscopy, presented two types of subgrains: polyhedral and round subgrains. Round subgrains were also observed on the surface of fabrication pores along the pellet radius. These round-shaped subgrains seem to be associated to free surface rearrangement. This new type of round subgrains was proved to be independent of the rim effect. Observations of the fuel structure in the vicinity of rim area evidenced two types of defects specific to rim effect: planar defects and small intergranular pores. Hypothesis is made that the accumulation of planar defects could generate …

Effect of Composition on the Photoelectrochemical Behavior of Anodic Oxides on Binary Aluminum Alloys

2006

The photoelectrochemical behavior of anodic films on Al alloys, containing titanium, tantalum, and tungsten (valve metals), has been studied as a function of alloy composition and anodizing conditions. Photocurrent spectroscopy has been used to get information on bandgap and the flatband potential values of different mixed oxides. Both insulator-like and semiconducting behavior has been observed for anodic oxides grown on Al-W and Al-Ti alloys dependent on alloy initial composition. Optical bandgap values, E opt g , of different oxides are in accordance with predictions based on the correlation between E opt g and the difference of electronegativities of the oxide constituents, indicating p…

Chloride role in the surface of nickel electrode

1998

The chloride ion participation in the dissolution process on nickel electrodes in acid media as well as in the formation of the passive layer and in the pitting corrosion induction were studied. Composite electrodes containing nickel powder dispersed in a polymeric matrix show similar processes to those observed in polycrystalline nickel. Furthermore, phenformine hydrochloride inhibits the dissolution process due to the adsorption of the organic cation on the metal surface, although it does not protect the metal from pitting corrosion. Electrochemical impedance spectroscopy data allowed us to propose a physical model for the role of chloride ion in the dissolution and passivation processes …

Sprouting and intussusceptive angiogenesis in postpneumonectomy lung growth: mechanisms of alveolar neovascularization

2013

In most rodents and some other mammals, the removal of one lung results in compensatory growth associated with dramatic angiogenesis and complete restoration of lung capacity. One pivotal mechanism in neoalveolarization is neovascularization, because without angiogenesis new alveoli can not be formed. The aim of this study is to image and analyze three-dimensionally the different patterns of neovascularization seen following pneumonectomy in mice on a sub-micron-scale. C57/BL6 mice underwent a left-sided pneumonectomy. Lungs were harvested at various timepoints after pneumonectomy. Volume analysis by microCT revealed a striking increase of 143 percent in the cardiac lobe 14 days after pneum…

Initial Surface Film on Magnesium Metal. A Characterization by X-ray Photoelectron Spectroscopy (XPS) and Photocurrent Spectroscopy (PCS)

2007

Abstract A detailed investigation of the initial film grown on mechanically polished Mg electrodes has been carried out by ex situ X-ray Photoelectron Spectroscopy (XPS) and in situ Photocurrent Spectroscopy (PCS), allowing to reach a detailed picture of the passive layer structure. The XPS data show that the films formed soon after mechanical treatment and immersion in aqueous electrolyte have a bilayer structure, consisting of an ultra-thin MgO inner layer (∼2.5 nm) and a Mg(OH) 2 external layer. The thickness of the Mg(OH) 2 layer is a function of immersion time and solution temperature. After mechanical treatment and immersion in aqueous solution at room temperature, the MgO/Mg(OH) 2 la…

Photocurrent Spectroscopy in Corrosion and Passivity Studies. A Critical Assessment

2016

Photocurrent Spectroscopy (PCS) is currently employed for the characterization of solid-state properties of semiconducting and insulating materials, since the knowledge of their band gap is a prerequisite to any possible application in different fields such as: solar energy conversion (photoelectrochemical and photovoltaic solar cells, photocatalysis) and microelectronics (high-k, high band-gap materials) (1-2). In the last 20-30 years an increasing number of scientists working in the area of corrosion has been attracted by this technique owing to its versatility and ability to scrutinize in situ corrosion layers and passive films having semiconducting or insulating behaviour. In previous w…

Physicochemical Characterization of Passive Films and Corrosion Layers by Differential Admittance and Photocurrent Spectroscopy

2009

Two different electrochemical techniques, differential admittance and photocurrent spectroscopy, for the characterization of electronic and solid state properties of passive films and corrosion layers are described and critically evaluated. In order to get information on the electronic properties of passive film and corrosion layers as well as the necessary information to locate the characteristic energy levels of the passive film/electrolyte junction like: flat band potential (Ufb), conduction band edge (EC) or valence band edge (EV), a wide use of Mott-Schottky plots is usually reported in corrosion science and passivity studies. It has been shown, in several papers, that the use of simpl…

Photoelectrochemical Techniques in Corrosion Studies

2005

Physico-chemical characterization and corrosion properties of friction stir welded Al2024-T4 alloys

2009

Performance of a historical cantilever reinforced concrete bridge with half-joint degradation

2022

The lack of maintenance of roadway concrete bridges built from the Second World War until the 70 s of the 20th century has led in recent years to an ever-increasing request for safety assessments. When bridge performance in terms of Serviceability Limit State (SLS) and Ultimate Limit State (ULS) has to be evaluated, in-situ visual inspections and load tests for safety and maintenance assessment have to be coupled with structural analysis. In order to identify a sound bridge structural model and to assess the actual conservation state, more refined models than those usually considered for section and reinforcement design should be used to reproduce the results of load tests and perform globa…