Search results for " Detection"
showing 10 items of 1676 documents
Multitemporal Cloud Masking in the Google Earth Engine
2018
The exploitation of Earth observation satellite images acquired by optical instruments requires an automatic and accurate cloud detection. Multitemporal approaches to cloud detection are usually more powerful than their single scene counterparts since the presence of clouds varies greatly from one acquisition to another whereas surface can be assumed stationary in a broad sense. However, two practical limitations usually hamper their operational use: the access to the complete satellite image archive and the required computational power. This work presents a cloud detection and removal methodology implemented in the Google Earth Engine (GEE) cloud computing platform in order to meet these r…
Bollard Segmentation and Position Estimation From Lidar Point Cloud for Autonomous Mooring
2022
This article presents a computer-aided object detection and localization method from lidar 3-D point cloud data. This topic of interest is in the framework of autonomous mooring, where the ship is tied to the rigid structure on-shore (bollard) for autonomous maritime navigation. Using shape and features priors, unlike matching the whole object template to the experimental 3-D point cloud representation of the scene, two customized algorithms: 1) 3-D feature matching (3-DFM) and 2) mixed feature-correspondence matching (MFCM) are presented. The proposed algorithms discriminate and extract the 3-D points corresponding to the noncooperative bollard's surface from the background, thus capable o…
Electrophysiological Correlates of Change Detection during Delayed Matching Task: A Comparison of Different References
2017
Detecting the changed information between memory representation and incoming sensory inputs is a fundamental cognitive ability. By offering the promise of excellent temporal resolution, event-related potential (ERP) technique has served as a primary tool for studying this process with reference of the linked mastoid (LM). However, given that LM may distort the ERP signals, it is still undetermined whether LM is the best reference choice. The goal of the current study was to systematically compare LM, reference electrode standardization technique (REST) and average reference (AR) for assessing the ERP correlates of change detection during a delayed matching task. Colored shapes were adopted …
Effects of heat treatments on the properties of copper phthalocyanine films deposited by glow-discharge-induced sublimation
2006
Copper phthalocyanine films have been deposited by glow-discharge-induced sublimation. The films have undergone postdeposition heat treatments in air at 250 and 290 °C for different times, ranging from 30 min to 14 h. The properties of as-deposited and heated films have been investigated by different techniques in order to determine the effects of heat treatments on the film properties. Fourier transform infrared analysis and UV−visible optical absorption analysis point out a gradual evolution of the film structure from a mixture of α and β polymorphs to the only β polymorph in the sample heated at 290 °C for 14 h. A pronounced decrease of carbon and nitrogen atomic percentages against an o…
Influence of plasma chemistry on impurity incorporation in AlN prepared by plasma enhanced atomic layer deposition
2013
Impurities in aluminum nitride films prepared by plasma enhanced atomic layer deposition using NH3-, N2/H2- and N2-based plasmas are investigated by combining time-of-flight elastic recoil detection analysis (ERDA) and Fourier transform infrared spectroscopy. Different atomistic growth mechanisms are found to exist between the plasma chemistries. N2-plasma is shown as not suitable for the low-temperature deposition of AlN. Films deposited by NH3- and N2/H2-based processes are nitrogen rich and heavily hydrogenated. Carbon impurities exist at higher concentrations for the N2/H2-processes. The discovery of nitrile groups in the films indicates that carbon impurities can be partially attribute…
Studies on atomic layer deposition of MOF-5 thin films
2013
International audience; Deposition of MOF-5 thin films from vapor phase by atomic layer deposition (ALD) was studied at 225-350 degrees C. Zinc acetate (ZnAc2) and 1,4-benzenedicarboxylic acid (1,4-BDC) were used as the precursors. The resulting films were characterized by UV-Vis spectrophotometry, Fourier transform infrared spectroscopy (FTIR), optical microscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), time-of-flight elastic recoil detection analysis (TOF-ERDA), isopropanol adsorption tests, and nanoindentation. It was found out that the as-deposited films were amorphous but crystallized in humid conditions at room temperature. The crystalline films h…
Benzene monitoring by micro-machined sensors with SnO2 layer obtained by using micro-droplet deposition technique
2011
International audience; SnO2 thin layers were deposited by the way of the micro-droplet technique. The sensor substrate consisted of a thin membrane developed on oxidised silicon wafer. The sensing layers were deposited by means of the micro-droplet technique into thin layers of about 100 nm. Such devices were tested for benzene detection. The obtained results showed a very high sensitivity for this chemical compound since 500 ppb were detected. The results presented in this paper were not focused on the reactional mechanism of benzene detection but rather on the development of a cheap and sensitive sensor using sol-gel and micro-droplet processes. Since these layers were elaborated using s…
Detection and monitoring of carbon monoxide using cobalt corroles film on Love wave devices with delay line configuration
2011
Among specific sensitive materials synthesized for chemical sensor development, cobalt corrole have shown attractive capabilities for CO detection [1, 2]. In this paper, we investigate the possibility to exploit such materials to develop surface acoustic wave (SAW)-based sensors. We actually demonstrate that SAW devices using delay line configuration allow investigating the molecular recognition occurring in non-conductive sensing layers of cobalt corroles. We have monitored phase variations of SAW devices versus various CO concentrations. Moreover, a specific testing setup has been developed to precisely dose CO at low concentrations, to avoid any CO leakage in the environment, to systemat…
Porous materials applied to biomarker sensing in exhaled breath for monitoring and detecting non-invasive pathologies
2020
International audience; Overview of the use of porous materials for gas sensing to analyze the exhaled breath of patients for disease identification.The quantification of specific gases among thousand of VOCs (Volatile Organic Compounds) present in the human breath at the ppm/ppb level can be used to evidence the presence of diseases in the human body. The detection of these biomarkers in human exhaled breath through a noninvasive approach is an important field of research which is still attracting important attention to this day. A portable device working at room temperature and usable directly on exhaled breath samples is still a challenge requiring a sensing material with high performanc…
Ultra-thin film sensors based on porphyrin-5-ylphosphonate diesters for selective and sensitive dual-channel optical detection of mercury(II) ions
2020
International audience; Reusable dual-channel optical sensors for Hg2+ ions were prepared by Langmuir-Schaefer (LS) method from amphiphilic (trans-A2)BC-type porphyrins functionalized at meso-positions of the tetrapyrrolic macrocycle by sterically demanding diethoxyphosphoryl and mesityl groups as well as electron donating RO, RS or RNH substituents (R = n-C8H17). These three novel amphiphilic porphyrin derivatives were synthesized in good yields and their floating films at the air⎯water interface were investigated. In these monolayers, porphyrin molecules display a slipped stack-of-card orientation, but their strong π stacking is prohibited by bulky diethoxyphosphoryl and mesityl groups. T…