Search results for " Fuel Cell"
showing 10 items of 169 documents
A circuit model of a 5kW fuel cell
2013
In the last few years, industrial research has been focused on renewable energy sources. Owing to combined heat-power generation option, fuel cells have attracted much interest for a wide variety of research areas. Household appliances are still the most promising applications. Fuel cell modeling is still a critical topic to focus on, affecting each stage of power system design. This paper describes an empirical method to model a proton exchange membrane fuel cell. The modeling approach is applied to a 5kW Nuvera PowerFlow fuel cell. A circuit model is proposed for further applications. PSPICE implementation is described and the parameters tuning procedure is discussed. Simulation and exper…
Life cycle energy and environmental impacts of a solid oxide fuel cell micro-CHP system for residential application
2019
Abstract Fuel cells are considered one of the key technologies to reach the ambitious European goal of a low carbon economy, by reducing CO2 emissions and limiting the production of other pollutants. The manuscript presents an assessment of the life cycle energy and environmental performances of a solid oxide fuel cell system for household applications using primary data from the manufacturing phase and experimental data for the start-up and operation phases. The Life Cycle Assessment methodology is applied, based on a functional unit of 1 MJ of exergy and includes the life cycle steps from the raw materials extraction to the maintenance. The results show a particular relevance of the opera…
Methanol fuel processor and PEM fuel cell modeling for mobile application
2010
International audience; The use of hydrocarbon fed fuel cell systems including a fuel processor can be an entry market for this emerging technology avoiding the problem of hydrogen infrastructure. This article presents a 1 kW low temperature PEM fuel cell system with fuel processor, the system is fueled by a mixture of methanol and water that is converted into hydrogen rich gas using a steam reformer. A complete system model including a fluidic fuel processor model containing evaporation, steam reformer, hydrogen filter, combustion, as well as a multi-domain fuel cell model is introduced. Experiments are performed with an IDATECH FCS1200™ fuel cell system. The results of modeling and experi…
Effect of mode of operation, substrate and final electron acceptor on single-chamber membraneless microbial fuel cell operating with a mixed community
2018
Abstract Waste minimization and circular thinking are to be achieved in order to cope with the limited amount of resources of our planet. In this perspective, bio-electrochemical systems (BESs) can contribute to the global balance with their ability to extract chemical residual energy from wastewater and transform it directly into electrical current. BESs development has been limited by the cost connected to reactor design, in which membranes and cathode catalyst constituted a major drawback. In this paper we report the optimization process of a simple reactor without membranes or precious catalyst that produced 47.1 mW m−2, which is more than what achieved with configurations including mem…
Nano composite membrane-electrode assembly formation for fuel cell-modeling aspects
2007
Long term stability is an essential requirement for fuel cell applications in automobile and stationary energy systems. In these systems the agglomeration of the catalyst nanoparticles is a well-known phenomenon which cannot be easily overcome or compensated for by re-designing the system. A direct result of this occurrence is the irreversible decrease of the electrochemical performance. Irregularities in electric field distribution are one root cause for migration and subsequent agglomeration of the catalyst nanoparticle. In this work, the impact of the electrode mechanical deformation on electric field distribution was studied using a computer modeling approach. Model of a Proton Exchange…
Preliminary Tests On A Miniaturized Hybrid Pv-Pemfc System
2007
A regenerative hybrid PV-PEMFC low power system is a suitable solution to replace batteries and to supply small electric devices placed in remote areas with no grid connection. Such a system was designed and built including a PV array, electrolyzer, PEMFC stack (6We) and hydrogen storage tank. As well known a hybrid PV-PEMFC energy system may represent a reliable solution to the renewable energy storage problem. Hydrogen produced by such a system is a clean fuel, suitable to replace traditional fuels which contain carbon damaging the environment. The paper reports results of a preliminary, non-dynamic experimental analysis performed on the system in order to study the effects of the anode p…
Hydrogen Supplied Wireless Charging System for Electric Vehicles
2020
The aim of this work is the experimental characterization of a Wireless Charging System based on IPT (Inductive Power Transfer) supplied by a PEMFC (Proton Exchange Membrane Fuel Cell) in order to verify the possibility of its installation in not electrified areas. A hydrogen-based supply system is designed and assembled with the purpose of having an EV (electrical vehicle) charging station not connected to the main power grid. An efficiency analysis of the wireless transmission system is carried out taking into account external parameters such as distance and misalignment between the transmitter coil and the receiver coil, verifying the integration potentialities of both IPT and fuel cell …
Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated …
2007
Abstract One of challenges in improving the performance and cost-effectiveness of solid oxide fuel cells (SOFCs) is the development of suitable interconnect materials. Recent researches have enabled to decrease the operating temperature of the SOFC from 1000 to 800 °C. Chromia forming alloys are then among the best candidates for interconnects. However, low electronic conductivity and volatility of chromium oxide scale need to be solved to improve interconnect performances. In the field of high temperature oxidation of metals, it is well known that the addition of reactive element into alloys or as thin film coatings, improves their oxidation resistance at high temperature. The elements of …
Metallic interconnects for solid oxide fuel cell: Effect of water vapour on oxidation resistance of differently coated alloys
2009
International audience; The need of interconnect to separate fuel and oxidant gasses and connect individual cells into electrical series in a SOFC stack appears as one of the most important point in fuel cell technology. Due to their high electrical and thermal conductivities, thermal expansion compatibility with the other cell components and lowcost, ferritic stainless steels (FSS) are nowconsidered to be among the most promising candidate materials as interconnects in SOFC stacks. Despite the formation at 800 ◦C of a protective chromia Cr2O3 scale, it can transform in volatile chromium species, leading to the lost of its protectiveness and then the degradation of the fuel cell. A previous…
PEM electrolyzer characterization with carbon-based hardware and material sets
2021
Abstract The research and development of proton exchange membrane water electrolysis (PEMWE) is an upcoming and growing area due to a rising interest in hydrogen as an energy carrier. Operating conditions are harsher than in a fuel cell system, particularly because the potentials required for the oxygen evolution reaction are significantly higher. In commercial water electrolysis systems, this is compensated by typically using titanium material sets that are often protected against oxidation through coating processes. Such material choices make small scale research hardware and porous transport layers expensive and difficult to source. In this work, we show that the stability of traditional…