Search results for " Infrared"
showing 10 items of 945 documents
On-line gel permeation chromatography–attenuated total reflectance–Fourier transform infrared determination of lecithin and soybean oil in dietary su…
2007
Gel permeation chromatography (GPC) with attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry detection has been proposed for the simultaneous determination of lecithin and soybean oil in dietary supplements. The method involves the extraction of analytes with dichloromethane in an ultrasound water bath and the injection of 2 ml of centrifuged and filtered extracts into the system integrated by two Envirogel GPC columns (19 mm x150 mm, 19 mm x 300 mm) coupled on-line. Dichloromethane was used as mobile phase. A method has been developed to select the most appropriated wavenumber to be used for the determination of each considered compound from the calculation of a…
Multifunctional two-photon active silica-coated Au@MnO Janus particles for selective dual functionalization and imaging.
2014
Monodisperse multifunctional and nontoxic Au@MnO Janus particles with different sizes and morphologies were prepared by a seed-mediated nucleation and growth technique with precise control over domain sizes, surface functionalization, and dye labeling. The metal oxide domain could be coated selectively with a thin silica layer, leaving the metal domain untouched. In particular, size and morphology of the individual (metal and metal oxide) domains could be controlled by adjustment of the synthetic parameters. The SiO2 coating of the oxide domain allows biomolecule conjugation (e.g., antibodies, proteins) in a single step for converting the photoluminescent and superparamagnetic Janus nanopar…
Contact and contactless diffuse reflectance spectroscopy: potential for recovery monitoring of vascular lesions after intense pulsed light treatment.
2011
Optical fiber contact probe diffuse reflectance spectroscopy and remote multispectral imaging methods in the spectral range of 400 to 1100 nm were used for skin vascular malformation assessment and recovery tracing after treatment by intense pulsed light. The results confirmed that oxy-hemoglobin relative changes and the optical density difference between lesion and healthy skin in the spectral region 500 to 600 nm may be successfully used for objective appraisal of the therapy effect. Color redness parameter a* = 2 is suggested as a diagnostic border to distinguish healthy skin and vascular lesions, and as the indicator of phototreatment efficiency. Valuable diagnostic information on large…
Ligand effects on the structures and magnetic properties of tricyanomethanide-containing copper(II) complexes.
2007
The preparation, crystal structure and magnetic properties of four heteroleptic copper(II) complexes with the tricyanomethanide (tcm(-)) and the heterocyclic nitrogen donors 3,6-bis(2-pyridyl)pyridazine (dppn), 2,5-bis(2-pyridyl)pyrazine (2,5-dpp), 2,3-bis(2-pyridyl)pyrazine (2,3-dpp) and 2,3-bis(2-pyridyl)quinoxaline (2,3-dpq) are reported, {[Cu(2)(dppn)(OH)(tcm)(2)] x tcm}(n) (1), {[Cu(2,5-dpp)(tcm)] x tcm}(n) (2), {[Cu(2)(2,3-dpp)(2)(tcm)(3)(H(2)O)(0.5)] x tcm x 0.5H(2)O}(n) (3) and [Cu(2,3-dpq)(tcm)(2)](n) (4). 1 has a ladder-like structure with single mu-1,5-tcm ligands forming the sides and a bis-bidentate dppn and a single mu-hydroxo providing the rung. Each copper atom in 1 exhibits…
Evaluation and management of hemorrhoids: Italian society of colorectal surgery (SICCR) consensus statement
2015
Hemorrhoids are one of the most common medical and surgical diseases and the main reason for a visit to a coloproctologist. This consensus statement was drawn up by the Italian society of colorectal surgery in order to provide practice parameters for an accurate assessment of the disease and consequent appropriate treatment. The authors made a careful search in the main databases (MEDLINE, PubMed, Embase and Cochrane), and all results were classified on the basis of the grade of recommendation (A-C) of the American College of Chest Physicians.
Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites.
2013
Abstract The aim of this paper is to study the possibility of using of Arundo donax L. fibers as reinforcement in polymer composites. The fibers are extracted from the outer part of the stem of the plant, which widely grows in Mediterranean area and is diffused all around the world. To use these lignocellulosic fibers as reinforcement in polymer composites, it is necessary to investigate their microstructure, chemical composition and mechanical properties. Therefore, the morphology of A. donax L. fibers was investigated through electron microscopy, the thermal behavior through thermogravimetric analysis and the real density through a helium pycnometer. The chemical composition of the natura…
Structural characterization of Nigerian coals by X-ray diffraction, Raman and FTIR spectroscopy
2010
Abstract The structural parameters of six Nigerian coals were determined by X-ray diffraction, Raman and FTIR spectroscopy. This study reveals that the coals contain crystalline carbon of turbostratic structure with some amount of highly disordered amorphous carbon. The average lateral sizes ( L a ), stacking heights ( L c ) and interlayer spacing ( d 002 ) of the crystallite structures calculated from the X-ray intensities range from 16.47 to 25.70, 8.12 to 13.25 and 3.48 to 3.58 A, respectively. The L a values derived from the Raman spectra analyses using the classical linear relationship between 1/ L a and the D/G band ratio are higher (27.53–34.67 A) than values obtained from X-ray diff…
ATR-FTIR and XRD quantification of solid mixtures using the asymptotic constant ratio (ACR) methods. Application to geological samples of sodium and …
2019
Two asymptotic constant ratio methods applied to the quantification of individual components of solid samples using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD) are described. The methods involve the measurement of the peak current/peak areas of selected signals (diffraction peaks in XRD and absorption bands in ATR-FTIR) relative to the signal of standard added in constant proportion to the sample and the sample enriched with the analyte following the usual standard additions methodology. The proposed method compensates the absorption effects appearing in XRD and the presence of overlapping absorption bands of interferents by me…
Polarized Fourier transform infrared microscopy as a tool for structural analysis of adsorbates in molecular sieves
1992
Using FTIR microscopy with polarized IR radiation on silicalite I single crystals fully loaded with p-xylene, the existence of an ordered adsorbate could be proven for the first time by IR spectroscopy. By analyzing the polarized absorption bands the orientation of the p-xylene molecules relative to the host structure could be determined. The results agree well with structural data obtained from X-ray diffraction experiments. These first results suggest that polarized IR microscopy could develop into a powerful tool for the analysis of adsorbate structures, assisting in complete structure resolution by diffraction techniques
Water Sorption on Mesoporous Aluminosilicate MCM-41
1995
Characterization of the interaction of water with the highly ordered mesoporous solid MCM-41 (pore diameter ∼2.5 nm) is undertaken with the aid of several techniques (adsorption gravimetry, X-ray diffraction, Fourier transform infrared spectroscopy, and controlled rate-evolved gas analysis). The relatively complex water-MCM-41 interactions are characterized by a type V isotherm indicating an initial repulsive character followed by a capillary condensation step of the adsorbate. This highlights both hydrophobic and hydrophilic properties of this potential model mesoporous adsorbent.