Search results for " Ingegneri"
showing 10 items of 809 documents
Methodological Approach to Studying the dynamics of production networks: a Discrete Event Simulation Model
2013
This paper shows how discrete-event simulation represents an appropriate tool for approaching the dynamics of production networks. Three important factors influencing production network dynamics, specifically finite production capacity, manufacturing lead time, and its variability are discussed and a basic discrete-event simulation model is presented. Such model, which in its basic form represents a simple retail/distribution two-stage supply chain, is then extended in order to take into account those factors that can not be included in a classical control theoretical model.
Comparative study of the environmental footprints of marinas on European Islands
2021
AbstractPorts have been key elements in Europe's economic development. This situation is even more relevant on islands, which are highly dependent on the maritime sector. Consequently, over the years, ports with diverse functionalities have been established both in mainland Europe and on its outlying islands. This article discusses the environmental impact of leisure marinas on European islands, especially as they are closely linked to economic development through tourism. The aim is to study the environmental impact of these infrastructures by determining the carbon and water footprints of marinas on European islands in the Atlantic and the Mediterranean. The results obtained enable the au…
Oil-degrading bacteria from a membrane bioreactor (MBR) system for treatment of saline oily waste: isolation, identification and characterization of …
2015
This study was focused on the microbial community characterization during operation of a Membrane Bioreactor System, used for the treatment of saline oily wastes, originated from marine transportation. A collection of forty-two (42) strains was obtained during microbiological screening and the bacterial diversity analyzed by amplification and 16S rRNA sequencing. Taxonomic analysis has shown a high level of identity with recognized sequences for a total of seven (7) distinct bacterial genera (Alcanivorax, Erythrobacter, Marinobacter, Microbacterium, Muricauda, Rhodococcus and Rheinheimera). The biotechnological potential of all isolates was identified by the estimate of two key factors, suc…
Application of the Oxic-Settling-Anaerobic Process in a Membrane Bioreactor for Excess Sludge Reduction
2017
The main goal of this study was the evaluation of the excess sludge reduction in a MBR for biological nitrogen removal (BNR) through the implementation of the Oxic-Settling-Anaerobic (OSA) process. For this purpose, a MBR pilot plant (42 L volume) was realized according to a pre-denitrification scheme. The whole experimentation was divided into two periods, named Period 1 and Period 2, respectively. In Period 1 the pilot plant was started-up and the excess sludge production was evaluated. In Period 2 the plant configuration was partially modified by inserting an anaerobic reactor into the return activated sludge (RAS) line to realize an OSA configuration. In Period 1, the Yobs resulted equa…
Minimizing membrane bioreactor environmental footprint by multiple objective optimization.
2020
This paper presents a modelling study aimed at minimizing the environmental foot print of a membrane bioreactor (MBR) for wastewater treatment. Specifically, an integrated model for MBR was employed in view of the management optimization of an MBR biological nutrient removal (BNR) pilot plant in terms of operational costs and direct greenhouse gases emissions. The influence of the operational parameters (OPs) on performance indicators (PIs) was investigated by adopting the Extended-FAST sensitivity analysis method. Further, a multi-objective analysis was performed by applying the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The results show-up that the sludge …
Sensitivity and uncertainty analysis of an integrated ASM2d MBR model for wastewater treatment
2018
Abstract An integrated membrane bioreactor (MBR) model was previously proposed and tested. The model provides a comprehensive and detailed description of the nitrogen biological removal processes with respect to up-to-date literature. This paper presents a sensitivity and uncertainty analysis aimed at identifying the key factors affecting the variability of the model predictions. The Standardized Regression Coefficients (SRC) method was adopted for the sensitivity analysis. The uncertainty analysis was employed by running Monte Carlo simulations by varying only the value of the key factors affecting the model outputs. The sensitivity analysis combined with the uncertainty analysis applied h…
Simultaneous sludge minimization, biological phosphorous removal and membrane fouling mitigation in a novel plant layout for MBR.
2020
Abstract The integration of one anaerobic reactor in the mainstream (AMSR) of a pre-denitritication-MBR was evaluated with the aim to achieve simultaneous sludge minimization and phosphorous removal. The excess sludge production was reduced by 64% when the AMSR was operated under 8 h of hydraulic retention time (HRT). The highest nutrients removal performances referred to organic carbon (98%), nitrogen (90%) and phosphorous (97%) were obtained under 8 h of HRT. In contrast, prolonged anaerobic-endogenous conditions were found to be detrimental for all nutrients removal performances. Similarly, the lowest membrane fouling tendency (FR = 0.65∙1011 m−1 d−1) was achieved under 8 h of HRT, where…
Biological minimization of excess sludge in a membrane bioreactor: Effect of plant configuration on sludge production, nutrient removal efficiency an…
2018
Abstract Excess sludge minimization was studied in a MBR with pre-denitrification scheme. Sludge minimization, nitrogen removal performance and membrane fouling tendency were investigated in two configurations, characterized by a different position of the sludge retention reactor (SRR). In particular, the SRR was placed: i) in the return activated sludge line (Anaerobic Side-Stream Reactor – ASSR configuration) and ii) in the mainstream between the anoxic and aerobic reactor (Anaerobic Main-Stream Reactor – AMSR configuration). The achieved results demonstrated that the ASSR enabled a higher excess sludge reduction (74% vs 32%), while achieving lower biological nitrogen removal (BNR) (TN = …
Integrated fixed-film activated sludge membrane bioreactors versus membrane bioreactors for nutrient removal: A comprehensive comparison
2018
Abstract This research elucidates the pollutants (nutrients and carbon) removal performance and nitrous oxide (N2O) emissions of two pilot plants. Specifically, a University of Cape Town (UCT) Membrane Bioreactor (MBR) plant and an Integrated Fixed Film Activated Sludge (IFAS)-UCT-MBR plant were investigated. The plants were fed with real wastewater augmented with acetate and glycerol in order to control the influent carbon nitrogen ratio (C/N). The short-term effect of the inlet C/N ratio variation (C/N = 5 mgCOD/mgN and C/N = 10 mgCOD/mgN) on the behaviour of both plants was investigated. The results showed that the IFAS-UCT-MBR configuration provided the best performance in terms of poll…
Biofouling management in anaerobic membrane bioreactors
2020
Abstract This chapter is aimed at providing an insight on the main issues around the membrane fouling in anaerobic membrane bioreactors (AnMBRs). The analysis presented here shows that membrane fouling in AnMBRs is attributed to three major factors: membrane features, operating conditions, and wastewater characteristics. Several ad-hoc strategies have been implemented in literature to mitigate membrane fouling in AnMBRs, such as gas sparging, media addition, chemical cleaning, and membrane rotation/vibration. Among them, gas sparging is considered the most expensive strategy due to the high power requirement of the gas blower (up to 1.345 kWh m− 3). An accurate experimental and modeling ana…