Search results for " Ingegneri"

Towards A New Decision Support System for Design, Management and Operation of Wastewater Treatment Plants for the Reduction of Greenhouse Gases Emiss…

2015

The increasing attention paid to the environment has led to a reduction in the emissions from wastewater treatment plants (WWTPs). Moreover, the increasing interest in the greenhouse gas (GHG) emissions from WWTPs suggests that we reconsider the traditional tools used for designing and managing WWTPs. Indeed, nitrous oxide, carbon dioxide and methane can be emitted from wastewater treatment, significantly contributing to the greenhouse gas (GHG) footprint. The reduction of energy consumption as well as GHG emission are of particular concern for large WWTPs which treat the majority of wastewater in terms of both volume and pollution load. Nowadays, there is an increasing need to develop new …

Structure and Morphology Control in Polymer Forming Through the Thermal History

2011

Two examples of the application of the Continuous Cooling Transformation (CCT) method for investigating polymer solidification under processing conditions are illustrated. One example concerns the solidification behaviour of syndiotactic polystyrene (sPS) from the melt, showing an anomalous trend of density versus cooling rate, exhibiting a minimum around 1 °C/s. Once phase composition is obtained from WAXD deconvolution, density can be closely predicted, its minimum depending on the competition among crystalline phases upon increasing cooling rate. Another example regards the formation of Poly-Left Lactic Acid (PLLA) foams via Thermally Induced Phase Separation (TIPS) by starting from ther…

Polymer Solidification under Pressure and High Cooling Rates

2000

Abstract Polymer solidification under processing conditions is a complex phenomenon in which the kinetics of flow, high thermal gradients and high pressures determine the product morphology. The study of polymer structure formed under pressure has been mainly made using conventional techniques such as dilatometry and differential scanning calorimetry under isothermal conditions or non isothermal conditions but at cooling rates several orders of magnitude lower than those experienced in industrial processes. A new equipment has been recently developed and improved to study the crystallization of polypropylene when subjected to pressure and cooled rapidly. An experimental apparatus essentiall…

Characterization of PLLA scaffolds for biomedical applications

2017

The porosity and pore size distribution of three-dimensional scaffolds have direct implications on their biomedical applications (tissue engineering, drug delivery, and wound dressing). Accordingly, in this paper, a fast, facile, and conservative method relying on low-field nuclear magnetic resonance (LF-NMR) for the evaluation of mean pore size and pore size distribution of polymeric scaffolds is reported. The applicability of the technique is demonstrated on poly-L-lactic acid scaffolds fabricated using the thermal induced phase separation. Results obtained through LF-NMR are successfully compared to scanning electron microscope and X-ray microcomputed tomography micrographs.

Fate of aerobic granular sludge in the long-term: The role of EPSs on the clogging of granular sludge porosity

2016

This work aims to investigate the stability of aerobic granular sludge in the long term, focusing on the clogging of the granular sludge porosity exerted by the extracellular polymeric substances (EPSs). The effects of different cycle lengths (short and long-term cycle) on the granular sludge stability were investigated. Results obtained outlined that during the short duration cycle, the formation and breakage of the aerobic granules were continuously observed. During this period, the excess of EPS production contributed to the clogging of the granules porosity, causing their breakage in the long run. During the long-duration cycle, the extended famine period entailed a greater EPSs consump…

Rainwater Reuse in Urban Areas: A Mathematical Model and a Long-Term Modelling Approach

2018

Natural water resources are becoming increasingly limited due to global-scale climate change and water availability issues have become so severe that they must be addressed. Given these issues, reuse of wastewater and rainwater provides a promising way to cope with water shortages. This paper describes an investigation into the efficiency of rainwater usage systems. A conceptual model was built to assess the behaviour of rainwater tanks and their effectiveness in coping with water shortages. The study is based on a long-term simulation (12 years) of different rainwater reuse tank schemes. The associated reductions in residential freshwater demand (water reuse efficiency) and wet-weather run…

Treatment of high strength industrial wastewater with membrane bioreactors for water reuse: Effect of pre-treatment with aerobic granular sludge on s…

2019

Abstract In this study, the treatment of citrus wastewater with membrane bioreactors (MBRs) under different configurations was investigated for water reuse. In particular, one MBR and one aerobic granular sludge MBR (AGS + MBR) bench scale plants were operated for 60 days. The experimental campaign was divided into two periods. In Phase I, a conventional hollow fiber MBR was employed for the treatment of the raw high strength wastewater, whereas in Phase II a combination of in-series reactors (AGS + MBR) was adopted for the treatment of the high strength citrus wastewater The results demonstrated that both plant configurations enabled very high COD removal, with average values close to 99%.…

Price dispersion in the Italian airline industry: the role of competition and online travel agents

2013

An Early Beginning of Citizen Science: Adolescents Experiencing Urban Energy Usages and Air Pollution

2021

Here, we report on the process and development of high school science projects, which were inspired by a citizen science program focused on urban monitoring. We gathered and discussed two 1980s projects’ data, involving 2600 students, 80 teachers, 15 scientists and 20 stakeholders. We added recent survey data from speaking with the former participants. Our analysis revealed key findings: (1) the process of a student-driven science investigation engages students in the scientific practices; (2) it is important to bring together scientists, teachers and students, reflecting the importance of multi-dimensional learning; and (3) citizen science was born before the 1990s, when the term came into…

Biological nitrogen and phosphorus removal in membrane bioreactors: model development and parameter estimation

2012

Membrane bioreactors (MBR) are being increasingly used for wastewater treatment. Mathematical modeling of MBR systems plays a key role in order to better explain their characteristics. Several MBR models have been presented in the literature focusing on different aspects: biological models, models which include soluble microbial products (SMP), physical models able to describe the membrane fouling and integrated models which couple the SMP models with the physical models. However, only a few integrated models have been developed which take into account the relationships between membrane fouling and biological processes. With respect to biological phosphorus removal in MBR systems, due to th…