Search results for " Ingegneri"
showing 10 items of 809 documents
Pressure Retarded Osmosis: a Membrane Process for Environmental Sustainability
2016
Salinity Gradient Power (SGP) based on the controlled mixing between two solutions at different salinities is a viable alternative to produce power from renewable sources. Pressure Retarded Osmosis (PRO) is one of the most promising technologies proposed so far for the exploitation of such energy source. Apart from the typical source of salinity gradients, namely river water and seawater, more and more interest has been raised recently towards the use of non-conventional saline solutions. In this work, water originating from a sewage treatment plant is used as the dilute solution (feed solution), while brine exiting from a desalination plant is used as the concentrate (draw solution), thus …
Physical properties and Extracellular Polymeric Substances pattern of aerobic granular sludge treating hypersaline wastewater.
2017
The modification of the physical properties of aerobic granular sludge treating fish-canning wastewater is discussed in this paper. The structure and composition of the Extracellular Polymeric Substances (EPSs) were analyzed at different salinity levels and related to granules stability. Results outlined that the total EPSs content increased with salinity, despite the EPSs increment was not proportional to the salt concentration. Moreover, the EPSs structure was significantly modified by salinity, leading to a gradual increase of the not-bound EPSs fraction, which was close to the 50% of the total EPSs content at 75 g NaCl L-1. The increasing salt concentration modified also the EPSs compos…
Comparison between kinetics of autochthonous marine bacteria in activated sludge and granular sludge systems at different salinity and SRTs.
2019
Biological nutrient removal performances and kinetics of autochthonous marine biomass in forms of activated sludge and aerobic granular sludge were investigated under different salinity and sludge retention time (SRT). Both the biomasses, cultivated from a fish-canning wastewater, were subjected to stepwise increases in salinity (+2 gNaCl L−1), from 30 gNaCl L−1 up to 50 gNaCl L−1 with the aim to evaluate the maximum potential in withstanding salinity by the autochthonous marine biomass. Microbial marine species belonging to the genus of Cryomorphaceae and of Rhodobacteraceae were found dominant in both the systems at the maximum salinity tested (50 gNaCl L−1). The organic carbon was remove…
Comparison between moving bed-membrane bioreactor (MB-MBR) and membrane bioreactor (MBR) systems: Influence of wastewater salinity variation
2014
Two pilot plant systems were investigated for the treatment of wastewater subject to a gradual increase of salinity. In particular, a membrane bioreactor (MBR) and a moving bed biofilm membrane bioreactor (MB-MBR) were analyzed. Carbon and ammonium removal, kinetic constants and membranes fouling rates have been assessed. Both plants showed very high efficiency in terms of carbon and ammonium removal and the gradual salinity increase led to a good acclimation of the biomass, as confirmed by the respirometric tests. Significant biofilm detachments from carriers were experienced, which contributed to increase the irreversible superficial cake deposition. However, this aspect prevented the por…
Simultaneous nitritation-denitritation for the treatment of high-strength nitrogen in hypersaline wastewater by aerobic granular sludge
2015
Abstract Fish processing industries produce wastewater containing high amounts of salt, organic matter and nitrogen. Biological treatment of such wastewaters could be problematic due to inhibitory effects exerted by high salinity levels. In detail, high salt concentrations lead to the accumulation of nitrite due to the inhibition of nitrite-oxidizing bacteria. The feasibility of performing simultaneous nitritation and denitritation in the treatment of fish canning wastewater by aerobic granular sludge was evaluated, and simultaneous nitritation–denitritation was successfully sustained at salinities up to 50 gNaCl L −1 , with a yield of over 90%. The total nitrogen concentration in the efflu…
Physical features of Health Care Waste
2008
A monitoring work was recently carried out in two major Health Care Facilities (HCFs) in Italy, both located in Palermo, to obtain information on waste generation rates. Monitoring consisted in weighing infectious waste containers for 15 days in 4 Departments for each health care facility. From values obtained monthly production, specific weights and Production Indexes were calculated. The main producers of waste appeared Oncological DH and Resuscitation for both HCFs, with more than 4 and 3 kg measured per occupied place and day, respectively. About specific weight, apparent bulk values always below 200 kg/m3 were calculated. From the short observation performed it seems that notable impro…
Health Care Waste production: measures and estimates in “V. Cervello” Hospital, Palermo, Italy.
2009
A monitoring work was carried out in May/June 2007 in one large hospital located in Palermo. The monitoring consisted in weighing the infectious waste containers filled in some Departments purposely chosen. As a second stage of the work a comparison was attempted between the results obtained from the waste production monitoring and the Hospital’s purchases recorded in the same time. A restricted list of purchased products out of the general one was extracted. Such list allows one to calculate approximately the mass of medical devices purchased and their composition. To these materials a reasonable change in humidity after use was attributed. It was possible in this deductive way to draw a p…
Solution-Based Processing for Scaffold Fabrication in Tissue Engineering Applications: A Brief Review
2021
The fabrication of 3D scaffolds is under wide investigation in tissue engineering (TE) because of its incessant development of new advanced technologies and the improvement of traditional processes. Currently, scientific and clinical research focuses on scaffold characterization to restore the function of missing or damaged tissues. A key for suitable scaffold production is the guarantee of an interconnected porous structure that allows the cells to grow as in native tissue. The fabrication techniques should meet the appropriate requirements, including feasible reproducibility and time- and cost-effective assets. This is necessary for easy processability, which is associated with the large …
Novel dual-flow perfusion bioreactor for in vitro pre-screening of nanoparticles delivery: design, characterization and testing
2021
An advanced dual-flow perfusion bioreactor with a simple and compact design was developed and evaluated as a potential apparatus to reduce the gap between animal testing and drug administration to human subjects in clinical trials. All the experimental tests were carried out using an ad hoc Poly Lactic Acid (PLLA) scaffold synthesized via Thermally Induced Phase Separation (TIPS). The bioreactor shows a tunable radial flow throughout the microporous matrix of the scaffold. The radial perfusion was quantified both with permeability tests and with a mathematical model, applying a combination of Darcy's Theory, Bernoulli's Equation, and Poiseuille's Law. Finally, a diffusion test allowed to in…
Preparation and characterization of PLLA-HA scaffolds for bone tissue engineering
2013
In this work, the possibility to produce composite - Poly-L-lactic acid (PLLA) and Hydroxyapatite (HA) - porous scaffolds via Thermally Induced Phase Separation for bone tissue engineering applications was investigated. Several PLLA/HA ratios were tested (70/30, 50/50, 30/70 and 20/80 wt/wt) and the as-obtained scaffolds were characterized via Scanning Electron Microscopy (SEM), Wide Angle X-Ray Diffraction (WAXD) and compression test. The results showed that the presence of HA does not influence the phase separation process. Morphological analysis revealed an open structure with interconnected pores and HA embedded in the polymer matrix. This evidence was confirmed by WAXD analysis; where …