Search results for " MATERIALI"

Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding

2017

Abstract Aging resistance of jute reinforced laminates is compared with two jute/basalt hybrid laminates prepared with different stacking sequences (i.e., sandwich and intercalated configuration). To this aim, composites are exposed to cyclic conditions comprising hygrothermal stress and UV radiation to promote an accelerated aging, for a period of 84 days. Specimens of each laminate are tested after 14, 28, 56 and 84 days, respectively. Quasi-static flexural tests, Charpy impact tests and dynamic mechanical tests are performed according to international ASTM and ISO standards. Furthermore, scanning electron microscopy and differential scanning calorimetry are used to evaluate the morpholog…

Synthesis and thermoelectric characterisation of bismuth nanoparticles

2009

An effective method of preparation of bismuth nanopowders by thermal decomposition of bismuth dodecyl-mercaptide Bi(SC12H25)3 and preliminary results on their thermoelectric properties are reported. The thermolysis process leads to Bi nanoparticles due to the efficient capping agent effect of the dodecyl-disulfide by-product, which strongly bonds the surface of the Bi clusters, preventing their aggregation and significantly reducing their growth rate. The structure and morphology of the thermolysis products were investigated by differential scanning calorimetry, thermogravimetry, X-ray diffractometry, 1H nuclear magnetic resonance spectroscopy, scanning electron microscopy, and energy dispe…

Recycling polymer blends

2014

Nanomechanical Properties of Epoxy Composites with Carbon Fillers

2013

The key point of this study is investigation of nanomechanical properties of epoxy-based nanocomposites filled with different kinds of carbon nanofillers like exfoliated graphite, high surface-area carbon black, single-walled carbon nanotubes and multi-walled carbon nanotubes

Tunable radical scavenging activity of carbon nanotubes through sonication

2016

Abstract Carbon nanotubes (CNTs) having controlled radical scavenging activity have been achieved tuning the content of their lattice defects induced by an ultra-sound (us) treatment. The reactivity of CNTs, subjected to ultra-sonication for different time intervals, toward 1,1-diphenyl-2-pycryl (DPPH) and hydroxyl (•OH) radicals has been estimated and related to defect concentration, evaluated through Raman spectrometry. The radical scavenging efficiency of ultra-sound treated CNTs (us-CNTs) increases with increasing the content of the structural defects, suggesting that the defect resulting from us treatment can be capitalized to obtain an amplified and controlled radical scavenging activ…

Geometry and stacking sequence effect on composite spinnaker pole’s stiffness: experimental and numerical analysis

2006

Composite materials are widely employed in sailing sports, a possible application is for the mast pole or other sail poles. In the paper the attention is focused on the spinnaker poles mechanical performances; in particular the focus is on axial and ring compressive properties of three different carbon fibre/epoxy resin spinnaker poles, to investigate both the diameter and stacking sequence effect on the mechanical performance of the structure. Starting from the stacking sequence used in the production of a particular spinnaker pole, the effect of a lamina at 0- in the middle of wall thickness is investigated with the purpose to obtain a more stiff structure. Moreover to test the proposed s…

Evaluation of continuous filament mat influence on the bending behaviour of GFRP pultruded material via Electronic Speckle Pattern Interferometry

2017

Abstract Pultrusion is a process allowing the production of unidirectional (roving) fibre-reinforced polymer (FRP) structural elements with constant cross section. Recently, also civil engineers focused their attention on pultruded composite materials as alternative to traditional ones (e.g., concrete, steel). Furthermore, to improve the transverse strength and stiffness with respect to the fibres direction, continuous filament mat (CFM) is often placed within the stacking sequence. The CFM influence on the global mechanical behaviour is not considered by appropriate actual international standards. In this paper, the influence of the CFM layers on the mechanical behaviour of glass fibres pu…

Hybrid supramolecular gels of Fmoc-F/halloysite nanotubes: Systems for sustained release of camptothecin

2017

Supramolecular gel hybrids obtained by self-assembly of Fmoc-L-phenylalanine (Fmoc-F) in the presence of functionalized halloysite nanotubes (f-HNT) were obtained in biocompatible solvents and employed as carriers for the delivery of camptothecin (CPT) molecules. The synthesis of the new f-HNT material as well as its characterization are described. The properties of the hybrid hydrogels and organogels were analyzed by several techniques. The presence of small amounts of f-HNT allows good dispersion of the tubes and the subsequent formation of homogeneous gels. The experimental results show that f-HNT functions only as an additive in the hybrid gels and does not demonstrate gelator behavior.…

Cutting performance and indentation behaviour of diamond films on Co-cemented tungsten carbide

2000

Abstract Diamond films were grown by Hot Filament Chemical Vapour Deposition (HFCVD) on differently pretreated ISO-grade K10 cemented carbide (WC-5.8 wt.%Co) cutting inserts. Etching with diluted HNO3 and surface roughening by Murakami's reagent were used as substrate pretreatments. The adhesion of the films was evaluated by indentation tests. In order to obtain a reliable estimation of the adhesion by the slope of the crack radius–indentation load curves, a careful SEM measurement of the crack lengths was performed. Bare and diamond-coated cutting inserts were used for turning tests of Al2O3-reinforced aluminum alloy. The adhesion levels obtained from the indentation curves correlated well…

Salt-fog spray aging of jute-basalt reinforced hybrid structures. Flexural and low velocity impact response

2017

Abstract In this work, a study on the aging resistance of jute and jute-basalt interply hybrid laminates exposed to salt-fog is presented with the aim to investigate the possibility to enhance the durability of natural fiber reinforced composites for marine application by a ply-substitution approach. In particular, jute and basalt/jute reinforced composite plates were manufactured by vacuum assisted resin infusion in two different staking sequences (i.e., intercalated and sandwich-like basalt-jute) and aged under salt fog conditions. The effects of the accelerated aging at increasing times on the mechanical response of laminates were assessed in both quasi static (three point bending) and d…