Search results for " MECHANICAL PROPERTIES"
showing 10 items of 72 documents
Performance evaluation of a bio-based composite building material made of natural resin mixed with hay
2016
Recent years have seen an increasing public interest in issues related to energy saving and environmental pollution reduction in the building sector. As a result, many directives have been issued, the most important being the Directive 2010/31/EU (EPBD Recast) on the energy performance of buildings, which requires that “Member States shall ensure that by 31 December 2020 all new buildings are nearly zero-energy buildings”. This goal can be obtained not only by reducing energy demand for heating and cooling, but also, for example, by improving building envelope performances. In this work, a first analysis of the thermal and structural behaviour of a biocomposite material, constituted by a na…
Green Composites Based on Hedysarum coronarium with Outstanding FDM Printability and Mechanical Performance
2022
The addition of natural scraps to biodegradable polymers has gained particular interest in recent years, allowing reducing environmental pollution related to traditional plastic. In this work, new composites were fabricated by adding 10% or 20% of Hedysarum coronarium (HC) flour to Poly (lactic acid) (PLA). The two formulations were first produced by twin screw extrusion and the obtained filaments were then employed for the fabrication of composites, either for compression molding (CM) or by fused deposition modeling (FDM), and characterized from a morphological and mechanical point of view. Through FDM it was possible to achieve dense structures with good wettability of the filler that, on…
Effect of stress and temperature on the thermomechanical degradation of a PE-LD/OMMT nanocomposites
2014
Thermomechanical degradation of nanocomposites is a topical issue that has not been fully investigated as demonstrated by the low number of papers available in the literature regarding this spe- cific aspect. In particular, with regards to low density polyethylene/clay nanocomposites, the degrada- tion behavior is very complex since it involves the degradation paths of both the polymer matrix and the organomodified nanoclay. In the present work, the effects of mechanical stress and temperature on the thermomechanical behavior of PE-LD/organomodified clay nanocomposites and the degradation paths were investigated by rheological, FT-IR and mechanical methods. The results have shown that the t…
Mechanical Characterization of Polysaccharide/polyaminoacid Hydrogels as Potential Scaffolds for Tissue Regeneration
2011
The mechanical properties of hydrogel scaffolds based on hyaluronic acid (HA) that were chemically crosslinked with α,β-poly(N-2-hydroxyethyl)(2-aminoethylcarbamate)-D,L-aspartamide (PHEA-EDA) were investigated. Variation of these properties as a function of three different PHEA-EDA amounts used to crosslink HA has been related to the reaction efficiency evaluated using a colorimetric assay. Moreover, the amount of unreacted amino groups that was still present in the hydrogels was related to the attachment behavior of human dermal fibroblasts to the hydrogel surface. The mechanical data and biological results suggest the suitability of the investigated hydrogels as scaffolds for the regener…
Effect of small amounts of poly(lactic acid) on the recycling of poly(ethylene terephthalate) bottles
2011
Abstract Poly(ethylene terephthalate) (PET) is one of the most used commodity polymers, especially for food and beverage applications, and its recycling is of great importance because of the possible use in the textile and construction industries. On the other hand, the interest in biodegradable polymers has led, in recent years, to the use of materials such as poly(lactic acid) (PLA) also in the food and beverage industry. The presence of small amounts of PLA in the PET waste can significantly affect the post-consumer recycling process. In this work, the effect of the presence of small amounts of PLA on the recycling of PET bottles is investigated by rheological, mechanical, morphological …
Local mechanical and morphological characterization of FSW butt joints
2006
In this paper the results of an experimental investigation into the local mechanical and morphological characterization of AA6082-T6 friction stir-welded (FSW) butt joints are illustrated. The softening effects of the welding process are highlighted through the use of micro-indentation tests on the top surface of the specimens. The effect of post-welding heat treatments was investigated, also
Numerical experimental analysis of hybrid double lap aluminum-CFRP joints
2015
Abstract Due to their reliability and ease of assembly, both the adhesively bonded and the mechanical joints are commonly used in different fields of modern industrial design and manufacturing, to joint composite materials or composites with metals. As it is well known, adhesively bonded joints are characterized by high stiffness and good fatigue life, although delamination phenomena localized near the free edges may limit their use, especially for applications where corrosive environments and/or moisture can lead to premature failure of the bonding. In these cases, a possible alternative is given by the well-known mechanical joints. On the contrary, these last joints (bolted, riveted) requ…
Accelerated weathering of PP based nanocomposites: Effect of the coupling agent
2013
.
Linking structure and mechanical properties via instrumented nanoindentations on well-defined morphology poly(ethylene) Polymer 50 8 1939-1947 2009
2009
Several poly(ethylene) samples with a broad range of morphologies were studied in this work using nanoindentations. The samples had degrees of crystallinity ranging from 30 to100% while their Young’s modulus ranged from few tens of MPa up to several GPa. Experimental conditions for the correct evaluation of Young’s modulus were at first identified, choosing a suitable loading rate in order to minimize viscoelastic effects on the unloading. The force curves, i.e. plots of applied load vs. penetration depth, were then analyzed following two common procedures available in the literature. None of these procedures leads to satisfying results when compared to other experimental techniques. Howeve…
Effect of Oxidized Potato Starch on the Physicochemical Properties of Soy Protein Isolate-Based Edible Films
2013
The influence of oxidized starch on the physicochemical properties of cast soy protein isolate films is determined in this study. Films were cast from heated (70 °C for 20 min) alkaline (pH=10) aqueous solutions of 7 % soy protein isolate containing 50 % (by mass) glycerol as a plasticizer and different levels of added oxidized starch (0, 5, 10, 15, and 20 %, by mass). For all types of films, opacity, contact angle, tensile strength, elongation at break, water vapour permeability, measured at 25 °C for four relative humidity differentials (30–53, 30–75, 30–84 and 30–100 %), differential scanning calorimetry and microstructure were determined after conditioning film specimens at 25 °C and 30…