Search results for " Metals and Alloys"
showing 10 items of 90 documents
A new route for the preparation of flexible skin–core poly(ethylene-co-acrylic acid)/polyaniline functional hybrids
2011
Abstract Surface modification of polymeric films is a way to obtain final products with high performance for many specific and ad hoc tailored applications, e.g. in functional packaging, tissue engineering or (bio)sensing. The present work reports, for the first time, on the design and development of surface modified ethylene–acrylic acid copolymer (EAA) films with polyaniline (PANI), with the aim of inducing electrical conductivity and potentially enable the electronic control of a range of physical and chemical properties of the film surface, via a new “grafting from” approach. In particular, we demonstrate that PANI was successfully polymerized and covalently grafted onto flexible EAA su…
Polyamide/carbonaceous particles nanocomposites fibers: Morphology and performances
2015
In this work, the influence of carbonaceous particles with different sizes and shapes on the morphology and mechanical performances of polyamide (PA)-based fibers was investigated. Graphene nanoplatelets (GNP) are compared with spherical and rod-like carbon fillers such as carbon black (CB) and multiwall carbon nanotubes (CNTs). The increments of the complex viscosity as well as elastic and loss moduli, in the melt state, assessed by rheological analysis, are reduced by modifying polyamide (PA) matrix with nanofillers in a following order: CNTs > GNP > CB. All the nanocomposites, however, show viscosity and moduli higher than those of neat PA. The CB loading causes a mere increase of the vi…
On the role of multi-functional polyhedral oligomeric silsesquioxane in polystyrene-zinc oxide nanocomposites
2014
Abstract Multi-functional trisilanol phenyl (TSPH) and trisilanol isobutyl (TSIB) polyhedral oligomeric silsesquioxane (POSS) have been used in the formulation of advanced polystyrene (PS)-zinc oxide (ZnO) nanocomposites. The neat matrix and PS/ZnO-based nanocomposites have been characterized through rheological, morphological, mechanical, and dynamic thermo-mechanical analysis. Both TSPH and TSIB are able to improve the dispersion of ZnO into the polystyrene matrix; furthermore, adding TSIB leads to better results because it facilitates better solubility into the PS matrix and interaction/reaction with the ZnO nanopowder. Finally, the optical properties and photo-oxidative resistance of th…
Theory of vibrational anomalies in glasses
2015
Abstract The theory of elasticity with spatially fluctuating elastic constants (heterogeneous-elasticity theory) is reviewed. It is shown that the vibrational anomalies associated with the boson peak can be qualitatively and quantitatively explained in terms of this theory. Two versions of a mean-field theory for solving the stochastic equation of motion are presented: the coherent-potential approximation (CPA) and the self-consistent Born approximation (SCBA). It is shown that the latter is included in the former in the Gaussian and weak-disorder limit. We are able to discuss and explain cases in which the change of the vibrational spectrum by varying an external parameter can be accounted…
Profiles and Sources of PAHs in Sediments from an Open-Pit Mining Area in the Peruvian Andes
2015
The Peruvian Andes are one of the most productive areas for mining and therefore also one of the most exposed to these sources of pollution. This article reports the characterization of Polycyclic Aromatic Hydrocarbons (PAHs) in sediments of Cerro de Pasco area (Peru) located close to a large open-pit mine and, in recent years, several reports have provided evidence of environmental contamination and related health problems. Investigations were carried out into the fifteen PAHs identified by the US-Environment Protection Agency (US-EPA) as requiring priority monitoring, other non US-EPA listed PAHs and perylene were also investigated in order to obtain further information on their origins. …
Olive mill wastewaters decontamination based on organo-nano-clay composites
2019
Abstract Green composites for environmental applications were successfully prepared by intercalation of the biosurfactant Quillaja saponin onto montmorillonite mineral clay on varying pH and surfactant/clay ratio. Equilibrium adsorption isotherms were constructed and the system was characterized by performing TGA and XRD analyses. The efficiency of the surfactant-modified clay in the removal of the organic content present in olive mill wastewaters (OMW) was evaluated by means of spectrophotometric measurements. The interest for this cogent issue comes from the consideration that, despite their high pollutant content, OMW can be considered as a potential resource of several organic compounds…
Variability of the Si-O-Si angle in amorphous-SiO2 probed by electron paramagnetic resonance and Raman spectroscopy
2009
We report an experimental investigation by electron paramagnetic resonance (EPR) and Raman spectroscopy on a variety of amorphous silicon dioxide materials. Our study by EPR have permitted us to point out that the splitting of the primary hyperfine doublet of the Eγ′ center shows a relevant sample-to-sample variability, changing from ∼41.8 to ∼42.6 mT in the set of materials we considered. The parallel study by Raman spectroscopy has enabled us to state that this variability is attributable to the different Si-O-Si angle characterizing the matrices of the different materials. © 2009 Elsevier B.V. All rights reserved.
Improvement of the photo-stability of polystyrene-block-polybutadiene-block-polystyrene through carbon nanotubes
2015
Abstract The photo-stability of Polystyrene-Polybutadiene-Polystyrene (SBS) based nanocomposites containing bare multi-walled carbon nanotubes (CNTs) and carbon nanotubes bearing carboxylic functional groups (CNTs-COOH) in comparison to that of pristine SBS has been studied. The photo-oxidation of pristine SBS occurs through crosslinking reactions and oxidized species formation and both these processes begin at early stage of exposure. The formation of crosslinking, formerly in polybutadiene phase, assessed by spectroscopical (FTIR), mechanical, dynamic mechanical and rheological analysis, leads to occurrence of internal mechanical stresses in the solid state and the SBS samples become prem…
Pull-off adhesion of hybrid glass-steel adhesive joints in salt fog environment
2016
The aim of this paper was to evaluate the durability behaviour of glass/steel adhesive joints exposed to salt fog environmental conditions for ten weeks, according to ASTM B117 standard. To this scope, pull-off mechanical tests were carried out in order to evaluate the performances evolution and damage phenomena of the adhesive joints during the ageing exposition. Two different types of adhesives were compared (i.e. epoxy and polyurethane ones). Moreover, the effects of the glass surface condition and the presence of a basalt mat layer within the adhesive thickness were evaluated. The mechanical performances were related with the occurred failure mechanisms. Epoxy-based joints showed higher…
Symmetric naphthalenediimidequaterthiophenes for electropolymerized electrochromic thin films
2015
A new symmetric naphthalenediimidequaterthiophene (s-NDI2ODT4) was synthesized and exhibited the capability to electropolymerize alone or with EDOT affording polymers with controlled donor/acceptor monomer ratios. s-NDI2ODT4-EDOT-based copolymers showed low band gaps, wide optical absorption ranges extending to the near IR region, tuned electrical properties, thin-film surface morphology and hydrophilicity as well as high coloration efficiency in electrochromic devices.