Search results for " Mixing"
showing 10 items of 270 documents
Polarization backward-wave four-wave mixing in BaTiO_3:Fe using the photovoltaic effect
1997
We report the first study to our knowledge of polarization backward-wave four-wave mixing in a BaTiO3:Fe crystal and compare the results of our measurements with the calculations performed within the model of photovoltaic charge transport. Two identically polarized pump waves and one orthogonally polarized signal wave are sent to a sample in a plane normal to the crystal’s C axis; a phase-conjugate wave with polarization identical to that of the signal wave is generated. With a 2-mm-thick sample a phase-conjugate reflectivity Rpc≈0.01 is reached; for a 1-cm-thick sample, amplified reflection should be possible.
Investigation into the gas mixing effect in ECRIS plasma using Kα and optical diagnostics
2018
Mixing a lighter gas species into the plasma of an ECRIS is known to enhance high charge state production of the heavier gas species. With this investigation, Kα diagnostics, optical emission spectroscopy and the measured charge state distribution of the extracted beam were combined to shed more light on the physics governing this phenomenon. Kα diagnostics data from two ion sources, the JYFL 14 GHz ECRIS and the GTS at iThemba LABS, are presented to gain confidence on the observed trends. The results seem to favor ion cooling as the most likely mechanism responsible for the favorable influence of the gas mixing.Mixing a lighter gas species into the plasma of an ECRIS is known to enhance hi…
Bi-layer PCL/PLA scaffold prepared by melt for interface tissue engineering
2017
The development of porous multilayer devices allow controlling chemical, physical and mechanical properties by tuning the properties of each single layer. For instance, this feature is of main concern for the production of porous devices designed to regenerate diseased zones at the interface of tissue presenting intrinsic anisotropic structures that gradually change from one tissue to another. In this context, synthetic biodegradable polymers commonly used biomedical applications include polylactic acid (PLA) and polycaprolactone (PCL). In this work, a novel bi-layered multiphasic scaffold (BLS) is presented. It is composed by a PLA-layer presenting pore size in the range of 90-110 μm while…
Effect of preparation method on the properties of poly(methyl methacrylate)/mesoporous silica composites
2019
The preparation method of a polymer composite and the filler loading are amongst the factors that influence the properties of the final composites. This article studies the effect of these factors on the thermal stability and thermal degradation kinetics of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites filled with small amounts of MCM-41. The PMMA/MCM-41 composites were prepared through in situ polymerisation and melt mixing methods, with MCM-41 loadings of 0.1, 0.3, and 0.5 wt.%. The presence of MCM-41 increased the thermal stability of PMMA/MCM-41 composites prepared by melt mixing, but in the case of the in situ polymerised samples, the MCM-41 accelerated the deg…
Alignment-free, all-spliced fiber laser source for CARS microscopy based on four-wave-mixing
2012
An environmentally-stable low-repetition rate fiber oscillator is developed to produce narrow-bandwidth pulses with several tens of picoseconds duration. Based on this oscillator an alignment-free all-fiber laser for multi-photon microscopy is realized using in-fiber frequency conversion based on four-wave-mixing. Both pump and Stokes pulses for coherent anti-Stokes Raman scattering (CARS) microscopy are readily available from one fiber end, intrinsically overlapped in space and time, which drastically simplifies the experimental handling for the user. The complete laser setup is mounted on a home-built laser scanning microscope with small footprint. High-quality multimodal microscope image…
Polarization Modulation Instability in All-Normal Dispersion Microstructured Optical Fibers With Quasi-Continuous Pump
2019
We report the experimental observation of the polarization modulation instability (PMI) effect in all-normal dispersion (ANDi) microstructured optical fibers (MOFs) with quasi-continuous pumping. The small unintentional birefringence (~10-5), that any realistic non-polarization maintaining MOF exhibits, contributes to this nonlinear effect. PMI can produce two sidebands whose polarization state is orthogonal to the polarization of the pump. In this work, only one type of PMI process is observed, i.e., when the pump is polarized along the slow axis of the fiber and sidebands are generated in the fast axis mode. This PMI process was studied experimentally in two ANDi fibers with different dis…
Stable isotope analysis reveals trophic segregation between the invasive zebra mussel Dreissena polymorpha and the native duck mussel Anodonta anatin…
2022
AbstractNon-indigenous freshwater bivalves negatively affect invaded ecosystems through different mechanisms, including inter-specific competition for trophic resources. Here, we investigated in Lake Trasimeno (Central Italy) the diet of the invasive Dreissena polymorpha and the native Anodonta anatina. δ15N and δ13C stable isotopes were measured in winter and summer in bivalves, phytoplankton, and sedimentary organic matter (SOM); the relative dietary contributions of the two resources were determined using Bayesian mixing models. To elucidate the different carbon and nitrogen pools characterizing the study site, isotopic analyses were extended to zooplankton and to representatives of the …
On the designing of densely dispersion-managed optical fiber systems for ultrafast optical communication
2003
We present some theoretical and experimental results which suggest the possibility of constructing a non-empirical methodology of designing optical transmission systems with ultra high bit-rate per channel. Theoretically, we present an average dispersion decreasing densely dispersion-managed (A4dm) fiber system, which exhibits many advantages over the densely dispersion-managed fiber system, such as the possibility of transmitting chirp-free Gaussian pulses at 160 Gbit/s per channel over transoceanic distances, with a reduced energy and minimal intra-channel interaction. Experimentally we present generation of a 160-GHz picosecond pulse train at 1550 nm using multiple four-wave mixing tempo…
Nonzero |U_e3| from charged lepton corrections and the atmospheric neutrino mixing angle
2013
After the successful determination of the reactor neutrino mixing angle theta(13) not equal 0.16 not equal 0, a new feature suggested by the current neutrino oscillation data is a sizeable deviation of the atmospheric neutrino mixing angle theta(23) from pi/4. Using the fact that the neutrino mixing matrix U = (UeU nu)-U-dagger, where U-e and U-nu result from the diagonalisation of the charged lepton and neutrino mass matrices, and assuming that U-nu has a i) bimaximal (BM), H) tri-bimaximal (TBM) form, or else Hi) corresponds to the conservation of the lepton charge L' = L-e - L mu - L-tau (LC), we investigate quantitatively what are the minimal forms of U-e, in terms of angles and phases …
Local photo-oxidation of individual single walled carbon nanotubes probed by femtosecond four wave mixing imaging
2014
Photo-oxidation of individual, air-suspended single walled carbon nanotubes (SWCNTs) is studied by femtosecond laser spectroscopy and imaging. Individual SWCNTs are imaged by four wave mixing (FWM) microscopy under an inert gas (Ar or N2) atmosphere. When imaging is performed in an ambient air atmosphere, the decay of the FWM signal takes place. Electron microscopy shows that SWCNTs are not destroyed and the process is attributed to photoinduced oxidation reactions which proceed via a non-linear excitation mechanism, when irradiation is performed with ∼30 fs pulses in the visible spectral region (500-600 nm). Photo-oxidation can be localized in specific regions of SWCNTs within optical reso…