Search results for " Radiation."
showing 10 items of 2788 documents
Waveguiding properties of a photonic crystal fiber with a solid core surrounded by four large air holes
2009
The polarization-dependent guiding properties of a hexagonal-lattice photonic crystal fiber with a solid-core surrounded by four large air holes are investigated. The appearance of a polarization dependent cutoff frequency, together with several parameters as the birefringence, the modal effective area, the group velocity dispersion and the polarization dependent loss are analyzed. A collection of fibers with different structural parameters were fabricated and characterized. An effective anti-guide structure from at least 450 nm to 1750 nm, a polarizing fiber with a polarization dependent loss of 16 dB/m at 1550 nm, and an endlessly singlemode polarization-maintaining fiber with group biref…
Measurement and correction of atmospheric effects in O<inf>2</inf>-B and O<inf>2</inf>-A absorption bands in the context of s…
2014
Under sun-light illumination, the shape of the atmospheric oxygen bands (O 2 -B, 687 nm and O 2 -A, 760 nm) of the vegetation radiance is modified by chlorophyll fluorescence. However for far-range measurements, atmospheric effects also modify this shape. In this study, measurements in O 2 -A and O 2 -B absorption bands have been performed at different altitudes up to 3123 m over bare soil and wheat fields. It is observed that bands depth increase significantly with altitude. In O 2 -B band, the total magnitude of variation is of the same order of magnitude as the change induced by vegetation fluorescence, while it is much greater in O 2 -A band. We used MODTRAN 4 to correct measurements fr…
Plasmonic and diffractive nanostructures for light trapping—an experimental comparison
2015
Metal nanoparticles and diffractive nanostructures are widely studied for enhancing light trapping efficiency in thin-film solar cells. Both have achieved high performance enhancements, but there are very few direct comparisons between the two. Also, it is difficult to accurately determine the parasitic absorption of metal nanoparticles. Here, we assess the light trapping efficiencies of both approaches in an identical absorber configuration. We use a 240 nm thick amorphous silicon slab as the absorber layer and either a quasi-random supercell diffractive nanostructure or a layer of self-assembled metal nanoparticles for light trapping. Both the plasmonic and diffractive structures strongly…
Influence of the electro-optical properties of an a-Si:H single layer on the performances of a pin solar cell
2012
We analyze the results of an extensive characterization study involving electrical and optical measurements carried out on hydrogenated amorphous silicon (α-Si:H) thin film materials fabricated under a wide range of deposition conditions. By adjusting the synthesis parameters, we evidenced how conductivity, activation energy, electrical transport and optical absorption of an α-Si:H layer can be modified and optimized. We analyzed the activation energy and the pre-exponential factor of the dark conductivity by varying the dopant-to-silane gas flow ratio. Optical measurements allowed to extract the absorption spectra and the optical bandgap. Additionally, we report on the temperature dependen…
Amplified spontaneous emission in thin films of quasi-2D BA3MA3Pb5Br16 lead halide perovskites
2021
Quasi-2D (two-dimensional) hybrid perovskites are emerging as a new class of materials with high photoluminescence yield and improved stability compared to their three-dimensional (3D) counterparts. Nevertheless, despite their outstanding emission properties, few studies have been reported on amplified spontaneous emission (ASE) and a thorough understanding of the photophysics of these layered materials is still lacking. In this work, we investigate the ASE properties of multilayered quasi-2D BA3MA3Pb5Br16 films through the dependence of the photoluminescence on temperature and provide a novel insight into the emission processes of quasi-2D lead bromide perovskites. We demonstrate that the …
Optical gain, spontaneous and stimulated emission of surface plasmon polaritons in confined plasmonic waveguide
2010
International audience; We develop a theoretical model to compute the local density of states in a confined plasmonic waveguide. Based on this model, we derive a simple formula with a clear physical interpretation for the lifetime modification of emitters embedded in the waveguide. The gain distribution within the active medium is then computed following the formalism developed in a recent work [Phys. Rev. B 78, 161401 (2008)], by taking rigorously into account the pump irradiance and emitters lifetime modifications in the system. We finally apply this formalism to describe gain–assisted propagation in a dielectric–loaded surface plasmon polariton waveguide.
Kinetics of different processes in human insulin amyloid formation.
2007
Human insulin has long been known to form amyloid fibrils under given conditions. The molecular basis of insulin aggregation is relevant for modeling the amyloidogenesis process, which is involved in many pathologies, as well as for improving delivery systems, used for diabetes treatments. Insulin aggregation displays a wide variety of morphologies, from small oligomeric filaments to huge floccules, and therefore different specific processes are likely to be intertwined in the overall aggregation. In the present work, we studied the aggregation kinetics of human insulin at low pH and different temperatures and concentrations. The structure and the morphogenesis of aggregates on a wide range…
Use of radiation sources with mercury isotopes for real-time highly sensitive and selective benzene determination in air and natural gas by different…
2015
A new analytical portable system is proposed for the direct determination of benzene vapor in the ambient air and natural gas, using differential absorption spectrometry with the direct Zeeman effect and innovative radiation sources: capillary mercury lamps with different isotopic compositions ((196)Hg, (198)Hg, (202)Hg, (204)Hg, and natural isotopic mixture). Resonance emission of mercury at a wavelength of 254 nm is used as probing radiation. The differential cross section of benzene absorption in dependence on wavelength is determined by scanning of magnetic field. It is found that the sensitivity of benzene detection is enhanced three times using lamp with the mercury isotope (204)Hg in…
Photon absorption by aqueous TiO2 dispersion contained in a stirred photoreactor
1991
We present a simple experimental method which allows the evaluation of the absorbed photon flow. The method is based on measurements of transmitted photon rates (by means of standard actinometer solutions) for different reactor thicknesses and/or catalyst concentrations. The method was applied to phenol degradation reaction carried out in a stirred batch phtotoreactor containing aqueous TiO 2 (anatase) dispersion, directly irradied by a 1,500 W Xe lamp
Rate of photon absorption and turnover number: two parameters for the comparison of heterogeneous photocatalytic systems in a quantitative way
1993
Abstract In order to correctly compare the performance of different photocatalytic systems using polycrystalline semiconductor oxides, two parameters are proposed: the rate of photon absorption (rpa) and the turnover number (tn). From these quantities the quantum yield (qy), which indicates the efficiency of the absorbed photons for promoting a reaction event, can be determined. The phenol photodegradation reaction, carried out in aqueous dispersions of polycrystalline TiO2 (anatase) of different preparation methods and sources, has been used as “test reaction” in order to determine the tn, rpa and qy values.