Search results for " Simulation"
showing 10 items of 4034 documents
Large-Eddy Simulation of Flow and Heat Transfer in Compact Heat Exchangers
1994
LES results are presented for different heat exchanger geometries. Subgrid terms were usually computed by the Smagorinsky model; preliminary comparative results are also given for the ‘dynamic’ subgrid model. The numerical methods used were those implemented in a commercial general-purpose code (CFDS-FLOW3D); they included a finite-volume approach, colocated body-fitted grids, central differencing for the advection terms, the SIMPLEC algorithm, and Crank-Nicolson time stepping. Predictions arc compared with experimental measurements (including local Nu distributions), and with results from a low-Reynolds number k-e model. In most cases, LES was more ‘robust’ and required little more CPU tim…
Implantable collamer lens and femtosecond laser for myopia: comparison using an adaptive optics visual simulator.
2014
Purpose: To compare optical and visual quality of implantable collamer lens (ICL) implantation and femtosecond laser in situ keratomileusis (F-LASIK) for myopia. Methods: The CRX1 adaptive optics visual simulator (Imagine Eyes, Orsay, France) was used to simulate the wavefront aberration pattern after the two surgical procedures for -3-diopter (D) and -6-D myopia. Visual acuity at different contrasts and contrast sensitivities at 10, 20, and 25 cycles/degree (cpd) were measured for 3-mm and 5-mm pupils. The modulation transfer function (MTF) and point spread function (PSF) were calculated for 5-mm pupils. Results: F-LASIK MTF was worse than ICL MTF, which was close to diffraction-limited MT…
γ‐Agregation operators and some aspects of generalized aggregation problem
2010
We explore questions related to the aggregation operators and aggregation of fuzzy sets. No preliminary knowledge of the aggregation operators theory and of the fuzzy sets theory are required, because all necessary information is given in Section 2. Later we introduce a new class of γ‐aggregation operators, which “ignore” arguments less than γ. Due to this property γ‐aggregation operators simplify the aggregation process and extend the area of possible applications. The second part of the paper is devoted to the generalized aggregation problem. We use the definition of generalized aggregation operator, introduced by A. Takaci in [7], and study the pointwise extension of a γ‐agop. First publ…
Adjoint-based inversion for porosity in shallow reservoirs using pseudo-transient solvers for non-linear hydro-mechanical processes
2020
Abstract Porous flow is of major importance in the shallow subsurface, since it directly impacts on reservoir-scale processes such as waste fluid sequestration or oil and gas exploration. Coupled and non-linear hydro-mechanical processes describe the motion of a low-viscous fluid interacting with a higher viscous porous rock matrix. This two-phase flow may trigger the initiation of solitary waves of porosity, further developing into vertical high-porosity pipes or chimneys. These preferred fluid escape features may lead to localised and fast vertical flow pathways potentially problematic in the case of for instance CO2 sequestration. Constraining the porosity and the non-linearly related pe…
Quantification of diffuse and concentrated pollutant loads at the watershed-scale: an Italian case study
2009
In this study, diffuse and point source pollutant loads were evaluated using an Italian case study: the Nocella catchment, which has been subject to extensive monitoring. The Nocella catchment is located in Sicily (Italy) and has an area of about 60 km2. The river receives wastewater and stormwater from two urban areas drained by combined sewers. The two sewer systems, two wastewater treatment plants and a river reach were monitored during both dry and wet weather periods. Thereafter, an integrated catchment-scale model was applied to simulate point pollutant sources, i.e., pollution coming from the urban drainage system, and nonpoint pollutant sources, i.e., pollution coming from agricultu…
Analysis of Pollutant Emissions on City Arteries—Aspects of Transport Management
2021
The aim of the study is to present a methodology for analyzing pollution emissions in a medium-sized city using modern traffic simulations in the aspect of minimizing exhaust emissions. The scope of the research and the methods of analysis used differ from those applied in big cities projects that can be found in the literature, Therefore the progressive elaboration model has been applied methodically to formulate and carry out the feasibility study. To perform microscopic traffic simulations, the software Simulation of Urban Mobility (SUMO—German Aerospace Center (DLR), Berlin, Germany) was applied. Thanks to the simulations, changes in traffic organization were accurately identified in th…
Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties
2013
The role of the catechol moiety in the adhesive properties of mussel proteins and related synthetic materials has been extensively studied in the last years but still remains elusive. Here, a simplified model approach is presented based on a self-assembled monolayer (SAM) of upward-facing catechols thiol-bound to epitaxial gold substrates. The orientation of the catechol moieties is confirmed by spectroscopy, which also showed lack of significant amounts of interfering o-quinones. Local force-distance curves on the SAM measured by atomic force microscopy (AFM) shows an average adhesion force of 45 nN, stronger than that of a reference polydopamine coating, along with higher reproducibility …
Properties evolution of flax/epoxy composites under fatigue loading
2014
International audience; The tension-tension fatigue behaviour of flax fibre reinforced epoxy matrix composites have been investigated for specimens having [0]12, [90]12, [0/90]3S and [±45]3S lay-ups. The Probabilized Stress-Number of cycles (P-S-N) curves have been determined for each laminate type. The measured stress and strain data allowed to quantify the evolution of the mechanical properties, i.e. stiffness, damping and permanent strain as a function of imposed cycles. Especially, the stiffening phenomenon of flax reinforcements oriented parallel to the loading direction has been confirmed. However, due to the competition between damage development and the fibre stiffening, the increas…
New quantum Monte Carlo formulation for modeling trans-polyacetylene properties: specific heat calculation
2004
Abstract In this paper we propose a new hybridization scheme for numerical simulation based on the determinantal quantum Monte Carlo and analytical model to treat the vibration mode of one-dimensional trans -polyacetylene chain. We use both of the extended Hubbard model (EHM) and Peierls–Hubbard model to compute the specific heat for different assumptions. For both the two models, our results indicate that the behavior of the specific heat is characterized by a maximum. We also introduce the effect of dimerization through Peierls–Hubbard model. In this case it is found that the specific heat magnitude is slightly more important when compared to specific heat value found with the EHM case. M…
Torsional effects on the molecular polarizabilities of the benzothiazole (A)-benzobisthiazole (B) oligomer A-B13-A
1996
Abstract We outline a method for the calculation of multipole moments and molecular dipole-dipole ( ), dipole-quadrupole ( ), and quadrupole-quadrupole ( ) polarizabilities, which we have successfully applied to benzothiazole (A)-benzobisthiazole (B) oligomer A-B13-A. Three model rotational isomers have been characterized: (1) the fully planar (000) rotational isomer; (2) a conformation with each unit rotated 10° in the alternate direction (+−+), and (3) a rotational isomer with each unit rotated 10° in the same direction (+++). The dipole moment, μ , is smaller for isomers 000 and +−+ than for isomer +++. The calculation of , , and has been performed by use of the interacting induced dipol…