Search results for " Stainless steel"
showing 10 items of 51 documents
Galvanic deposition of Hydroxyapatite/Chitosan/Collagen coatings on 304 stainless steel
2021
The galvanic deposition method was used to deposit Hydroxyapatite/Chitosan/Collagen coatings on 304 stainless steel. Galvanic deposition is an alternative and valid way to fabricate bio-coatings with high biocompatibility and good anticorrosion properties. Physical-chemical characterizations were carried out to investigate chemical composition and morphology of the samples. Coatings consist of a mixture of calcium phosphate (Brushite and Hydroxyapatite) with chitosan and collagen. Corrosion tests were performed in the simulated body fluid (SBF) after different aging times. Results show that, in comparison with bare 304 stainless steel, coating shifts corrosion potential to anodic values and…
Galvanic Deposition of Hydroxyapatite/Chitosan/Collagen Coatings on 304 Stainless Steel
2021
The galvanic deposition method was used to deposit Hydroxyapatite/Chitosan/Collagen coatings on 304 stainless steel. Galvanic deposition is an alternative and valid way to fabricate bio-coatings with high biocompatibility and good anticorrosion properties. Physical-chemical characterizations were carried out to investigate chemical composition and morphology of the samples. Coatings consist of a mixture of calcium phosphate (Brushite and Hydroxyapatite) with chitosan and collagen. Corrosion tests were performed in the simulated body fluid (SBF) after different aging times. Results show that, in comparison with bare 304 stainless steel, coating shifts corrosion potential to anodic values and…
Increasing the shear capacity of reinforced concrete beams using pretensioned stainless steel ribbons
2017
In this work, the second part of an experimental campaign investigating the efficiency of an alternative retrofitting method for increasing the flexural and/or shear capacity in reinforced concrete beams, based on the use of prestressed stainless steel ribbons and steel angles, is presented and analytically reproduced. This group of tests focuses on the ability of the adopted retrofitting method to improve the shear strength and ultimate deformation of reinforced concrete structural elements. As described in a companion paper, the adopted retrofitting method is alternative to traditional techniques of reinforced concrete retrofitting, being easy to install and usually reversible, and charac…
One-step electrodeposition of superhydrophobic coating on 316L stainless steel
2021
Superhydrophobic coatings were fabricated through a one-step electrochemical process onto the surface of 316L stainless steel samples. The presence of hierarchical structures at micro/nanoscale and manganese stearate into the coatings gave superhydrophobicity to the coating, with contact angle of ~160°, and self-cleaning ability. Corrosion resistance of 316L samples was also assessed also after the electrodeposition process through Electrochemical Impedance Spectra recorded in an aqueous solution mimicking seawater condition.
Defects in Martensitic Stainless Steel 1.4031 (EN) Exposed to Friction as Seen by Positron Annihilation
2010
We present experimental results of measurements of the Doppler broadening of annihilation line and positron annihilation lifetimes in martensitic stainless steel 1.4031 (EN) samples exposed to the dry sliding under different loads. In particular, we tested the subsurface zone under the worn surfaces. As a main result, we obtained information about the defect profiles in this zone and the total extent of the damage region induced by the dry sliding.
Photoelectrochemical monitoring of rouging and de-rouging on AISI 316L
2017
Electrochemical conditions for inducing rouging on surface of AISI 316L in quasi neutral aqueous solution are studied. Potentiostatic polarization at 0.6 V vs. SSC at pH ∼ 7 allowed growth of colourless passive films with a band gap slightly lower than that estimated for the oxide grown on the SS surface by air exposure due to chromium dissolution. Under stronger anodic polarization (UE = 1.5 V vs. SSC) coloured passive films are formed, mainly constituted by iron oxide according to their band gap (Eg = 2.0 eV). Etching in citric acid at 60 °C results to be effective in removing rouging.
Chitosan-Coating Deposition via Galvanic Coupling
2019
A galvanic method to deposit chitosan coatings on stainless steel substrate is reported. Deposition of suitable coatings is desired to improve biocompatibility and corrosion resistance of metallic medical devices to be implanted in human body. In the present work, a thin hydrogel layer of chitosan was deposited on 304SS by a galvanic displacement reaction, which is advantageous first as it does not require external power supply. 304SS was immersed into an aqueous solution of chitosan/lactic acid and electrochemically coupled with magnesium acting as a sacrificial anode. SEM images showed the formation of a uniform layer of chitosan with a thickness controlled by deposition time. Corrosion t…
Investigations on friction and wear mechanisms of the PVD-TiAlN coated carbide in dry sliding against steels and cast iron
2006
Abstract The tribological behaviour of the monolayer PVD-titanium aluminium nitride (TiAlN) coated carbide inserts in unidirectional dry sliding against steel and cast iron counterparts was investigated using the pin-on-disc standard test with varying sliding speeds and normal loads. Three different materials of various machinability rates were used as the counterparts, namely the normalised medium carbon steel C45 equivalent to AISI 1045, austenitic stainless steel 1H18N9T equivalent to AISI 304 and gray cast iron EN-GJL-300 with flake-shaped graphite. A pin-on-disc device with round tool inserts was used to conduct friction and wear tests in which both the friction coefficient and the lin…
Experimental investigation of the cutting temperature when turning with coated indexable inserts
1999
Abstract This paper deals with an experimental investigation into the different factors which influence the temperature which occur at the coating/substrate–chip interface when machining a medium carbon steel and an austenitic stainless steel. Both flat-faced and grooved inserts coated with TiC, TiC/TiN and TiC/Al 2 O 3 /TiN were used. A standard K-type thermocouple embedded in the workpiece was used to convert measured efms to the interfacial temperature. Some optimal coating structures for high speed machining of these steels corresponding to the minimum interface temperature were selected. In particular, it was observed that by the proper selection of the thermal properties of the coatin…
Friction behaviour of heat isolating coatings in machining: mechanical, thermal and energy-based considerations
2003
Abstract This paper deals with possible modifications of the frictional behaviour exhibited during the cutting process resulting from the influence of the most-commonly used heat isolating coatings deposited on a WC-Co carbide substrate. For this study, three- and four-layered coatings with intermediate Al 2 O 3 ceramic layer and a monolayer TiAlN coating, which offer superior thermal protection of the carbide substrate, were examined. Orthogonal cutting tests were carried out by end-turning medium carbon steel and austenitic stainless steel workpieces. The experimental study was aimed at determining the fundamental frictional characteristics: dimensions of the tool-chip contact area, the f…