Search results for " Stainless steel"
showing 10 items of 51 documents
The role of coatings in controlling the cutting process when turning with coated indexable inserts
1998
Abstract This paper is concerned with the variations in the specific cutting pressure and the tool–chip interface temperature that occur when machining a medium carbon steel and an austenitic stainless steel with TiC-, TiC/TiN- and TiC/Al2O3/TiN- coated inserts. Extensive experimental studies involving the cutting force and the interface temperature were performed. A standard thermocouple embedded in the workpiece was used to determine the cutting temperature. Two new parameters were introduced in order to compare both the mechanical and thermal loadings of the tool–chip contact for coated flat-faced and grooved inserts. Some optimal coating structures for high speed machining of these stee…
Study of Coating/Work Material Interaction in Turning with Chip Forming Inserts
1997
This paper presents some interesting and novel results of an experimental study on the influence of the coating structure on the behaviour of the tribo-contact between the tool and the chip. The experiments involved TiC, TiC/TiN and TiC/Al2O3/TiN — coated flat-faced and grooved inserts in conjunction with a medium carbon steel and an austenitic stainless steel. Extensive experimental studies involving the cutting force and the tool-chip interface temperature were carried out. Two new parameters were introduced in order to compare both the mechanical and thermal loadings of the tool-chip contact for the two shapes of the rake face. Some optimal coating structures for high speed machining of …
Thermal Characterization of the Chip-Tool Interface When Using Coated Turning Inserts
2000
Abstract This paper reports some results of extensive experimental investigations of the thermal interactions between the coating/substrate and the moving surface of the chip. Semi-orthogonal cutting when bar turning a medium carbon steel and an austenitic stainless steel was carried out. Both flat-faced and grooved inserts coated with TiC, TiC/TiN, and TiC/Al 2 O 3 /TiN were tested. A standard K-type thermocouple embedded in the workpiece was used to convert measured efm's to the interfacial temperatures. In addition, the chiprake contact length and the area of contact were determined by using computer processing of scanned contact images. The minimum steady-state temperature at the interf…
Thermogalvanic corrosion of Alloy 31 in different heavy brine LiBr solutions
2012
Thermogalvanic corrosion generated between two electrodes of Alloy 31, a highly-alloyed austenitic stainless steel (UNS N08031), has been investigated imposing different temperature gradients in three deaerated LiBr solutions, under open circuit conditions by using a zero-resistance ammeter (ZRA). Besides EIS spectra were acquired in order to explain the obtained results. On the whole, cold Alloy 31 electrodes were anodic to hot Alloy 31 electrodes, since an increase in temperature favoured the cathodic behaviour of the hot electrode. Thermogalvanic corrosion of Alloy 31 in the LiBr solutions studied was not severe, although it negatively affects the corrosion resistance of the cold anode. …
Dissimilar material lap joints by Friction Stir Welding of Steel and Titanium Sheets: Process Modeling
2013
In the paper a continuum based FEM model for Friction Stir Welding of different material lap joint made out of thin stainless steel and titanium sheets is proposed. The simulation campaign was made out using the 3D Lagrangian implicit code DEFORM{trade mark, serif} by means of a rigid-visco-plastic approach. The model, already set up and tuned for FSW process of similar materials and geometrical configurations takes into account the different mechanical and thermal behavior of the two materials and the microstructural evolution of the considered titanium alloy in the same joint. Additionally, it is able to predict temperature, phase, strain and strain rate distributions and evolution at the…
Study of the Hydrogen Embrittlement Sensitivity of an X4CrNiMo 16.5.1 Stainless Steel and the Associated Electron Beam Weld
2015
X4CrNiMo 16.5.1 steel (commercial name APX4) is a low carbon martensitic stainless steel known for its remarkable mechanical characteristics and its good resistance to corrosion. The use of APX4 in the manufacture of high pressure gas vessels requires a thorough understanding of its resistance to Hydrogen Embrittlement (HE) as the gas can contain traces of hydrogen, and martensitic steels, and their welds, are generally very sensitive to HE. This paper deals with the first part of this study, involving the characterization of the microstructure and the mechanical properties of each zone of the electron beam weld (melted zone and four different heat affected zones), and the investigation of …
Positron Annihilation Study of Defects Induced by Various Cutting Methods in Stainless Steel Grade 304
2011
We report in this article the comparison of the subsurface zones (SZs) in austenitic stainless steel 304 samples created by three cutting techniques, i.e., the laser cutting (LC), abrasive water jet (AWJ), and traditional milling cutting (MC). The crystal lattice defects distribution in this zone were investigated using the positron annihilation method. It was shown that the MC creates the great number mainly edge dislocations decorated by vacancies. Their concentration decreases with the increase of the depth from the cut surface. The total depth of the SZ is extended up to 150 μm from the cut surface. Similar dependency was observed for the AWJ machining but the total depth is much lower,…
Evolution of microstructures and mechanical properties during dissimilar electron beam welding of titanium alloy to stainless steel via copper interl…
2013
Abstract The influence of operational parameters on the local phase composition and mechanical stability of the electron beam welds between titanium alloy and AISI 316L austenitic stainless steel with a copper foil as an intermediate layer has been studied. It was shown that two types of weld morphologies could be obtained depending on beam offset from the center line. Beam shift toward the titanium alloy side results in formation of a large amount of the brittle TiFe2 phase, which is located at the steel/melted zone interface and leads to reducing the mechanical resistance of the weld. Beam shift toward the steel side inhibits the melting of titanium alloy and, so, the formation of brittle…
Mechanical properties and corrosion behaviour of low carbon martensitic stainless steel after machining
2014
The influence of different combinations of cutting conditions on the mechanical behaviour (microhardness), the microstructure and the corrosion behaviour in NaCl solution (using the electrochemical microcell technique and pulse potentiodynamic testing) of a low carbon martensitic stainless steel (grade X4CrNiMo16.5.1 stainless steel) after tempering treatment was studied. Microhardness was increased on the machined surface. In addition, the electrochemical experiments have shown that the machined materials have a heterogeneous electrochemical behaviour. Significant effect of machining on pitting corrosion was noticed. The pitting potential was found to decrease as the microhardness increase…