Search results for " Structural"
showing 10 items of 1751 documents
Load carrying capacity of RC compressed columns strengthened with steel angles and strips
2012
Abstract In this paper a comparison between the analytical expressions for the prediction of the load carrying capacity of strengthened reinforced concrete (RC) columns with steel angles and strips is made. Expressions examined consider: the strength contribution due to the confinement effects induced by transverse strips; the composite action due to steel angles and unconfined concrete core; the strength contribution due to the composite actions of angles and concrete core taking into account that steel angles are subjected to axial force and bending moment and concrete core is confined by transverse strips. Design rules given by recent codes for the design of the strengthened columns are …
Multi-objective optimization of nitinol stent design.
2017
Nitinol stents continuously experience loadings due to pulsatile pressure, thus a given stent design should possess an adequate fatigue strength and, at the same time, it should guarantee a sufficient vessel scaffolding. The present study proposes an optimization framework aiming at increasing the fatigue life reducing the maximum strut strain along the structure through a local modification of the strut profile.The adopted computational framework relies on nonlinear structural finite element analysis combined with a Multi Objective Genetic Algorithm, based on Kriging response surfaces. In particular, such an approach is used to investigate the design optimization of planar stent cell.The r…
Review of push-out and shear response of hybrid steel-trussed concrete beams
2018
The hybrid steel trussed concrete beams examined in the present study are comprised of two principal components, i.e., a steel joist with inclined rebars, realized in industry, which is welded to a smooth steel plate and then embedded within the concrete cast in situ. The paper presents first the state of the art on laboratory tests and analytical modeling of the steel-to-concrete stress transfer mechanism investigated by push-out tests. Next, the most relevant scientific contributions currently available in the technical literature regarding experimental investigation on actual shear behavior are summarized and discussed. Lastly codes and analytical models are reviewed.
Modeling of out-of-plane behavior of masonry walls
2009
The flexural behavior of rectangular masonry sections is investigated by considering nonlinear stress-strain in compression and limited-tension material. A preliminary analysis shows that, with variation in the parameters specializing with the adopted conventional constitutive law, the experimentally observed behavior of different kinds of masonry materials can be approximated. Subsequently, moment-curvature dimensionless curves are derived numerically by satisfying the equilibrium equations of the section. In the case of negligible tensile strength these curves exhibit a typical shape that can be approximated by analytical expressions; consequently, suitable functions are proposed that are…
A Banki–Michell turbine for in-line water supply systems
2017
The design of a novel Banki-Michell type turbine, to be located in existing water pipelines, is proposed. The turbine has a very efficient diffuser which allows the turbine to be compact and, most important, to have in-line flanges for minimal piping modifications at existing sites. This turbine combines a simple geometry with stable efficiency in a wide range of water discharges. The design procedure estimates the outer diameter of the impeller, its width and the geometry of the diffuser. A series of experimental tests has been carried out to measure the efficiency of the proposed turbine prototype. The turbine was tested in two different configurations, with and without rotational velocit…
Experimental Investigation for Degradation Analysis of an RC Italian Viaduct and Retrofitting Design
2020
AbstractThe degradation state of RC bridge structures is one of the most important and difficult aspects to be interpreted. For these structures, structural analysis using FEM requires a reliable d...
Stochastic seismic analysis of MDOF structures with nonlinear viscous dampers
2009
Fluid damper devices in civil structures such as buildings or bridges are commonly used as energy absorbers for seismic protection. The problem in the response analysis of structures with filled dampers mainly consists in the fact that, due to the strongly nonlinear behavior of such equipments, the response spectrum (RS) technique fails. In this paper by using the concept of power spectral density function compatible with the elastic RS and the statistical linearization technique, the equivalent damping ratio is obtained. It is shown that once the system is linearized, results obtained by Monte Carlo simulation and those obtained by stochastic analysis are in good agreement. Copyright © 200…
Progress in the initial design activities for the European DEMO divertor: Subproject "Cassette"
2017
Abstract Since 2014 preconceptual design activities for European DEMO divertor have been conducted as an integrated, interdisciplinary R&D effort in the framework of EUROfusion Consortium. Consisting of two subproject areas, ‘Cassette’ and ‘Target’, this divertor project has the objective to deliver a holistic preconceptual design concept together with the key technological solutions to materialize the design. In this paper, a brief overview on the recent results from the subproject ‘Cassette’ is presented. In this subproject, the overall cassette system is engineered based on the load analysis and specification. The preliminary studies covered multi-physical analyses of neutronic, thermal,…
Design and optimization of bonded patch repairs of laminated composite structures
2015
International audience; The present study proposes a method for design optimization of external patched repairs. The tensile behavior of notched specimens with patched repair was studied using finite element analysis and compared with experimental results. It was found that high stress concentrations along the transverse edges of circular patches and/or at the longitudinal edges of the hole leads to early damage initiation in the parent plate. The damage initiation site and its propagation depend on the patch in-plane stiffness. The optimal patch design can be characterized by a strength ratio R*. The overall design of the patch repair can be considered using a dimensionless design paramete…
Analytical evaluation of steel–concrete composite trussed beam shear capacity
2015
A calculation method for the prediction of the shear resistance of precast composite beams, named Hybrid Steel Trussed-Concrete Beams (HSTCBs), is herein proposed. HSTCBs are constituted by a prefabricated steel truss embedded within a concrete matrix cast in situ so that, after curing, the two materials work together in the mechanical response of the composite structural element, the steel truss behaving as reinforcement of the beam. The proposed analytical model is developed on the basis of the results of a reference experimental campaign of three-point bending tests available in the literature, carried out on specimens of HSTCB designed in order to attain a shear failure. Furthermore, th…