Search results for " Synthesis"
showing 10 items of 1625 documents
Characteristics of LiFePO4 obtained through a one step continuous hydrothermal synthesis process working in supercritical water
2009
International audience; The olivine-like material LiFePO4 was prepared via a continuous hydrothermal synthesis process working from subcritical to supercritical water conditions. The influence of some processing parameters–temperature and reaction time–was investigated in terms of material purity, grain size and morphology. Supercritical conditions were found to be attractive to synthesize in one step a well-crystallized material without impurities. The primary particles size was in the nanometric range. They showed a natural tendency to form micron size agglomerates, which were supposed to be the cause of the limited capacity, as demonstrated through a cross study using laser particle size…
Particle size and morphology control of the negative thermal expansion material cubic zirconium tungstate
2009
Cubic ZrW2O8 is a negative thermal expansion (NTE) material that is of interest as filler in controlled thermal expansion composites. It is easily accessible from a hydrated precursor, ZrW2O7(OH)2·2H2O, which can be obtained by hydrothermal synthesis. Different reaction conditions were investigated to gain control over the morphology, and to minimize the particle size. Optimized procedures resulted in rod-shaped particles with widths of 10–30 nm and lengths of 200–500 nm, which showed little agglomeration. The particle size and morphology of the precursor are preserved during conversion to the NTE phase at 600–650 °C.
Manganese iron oxide superparamagnetic powder by mechanochemical processing. Nanoparticles functionalization and dispersion in a nanofluid
2012
Manganese ferrite nanoparticles were synthesized using a High-Energy Ball-Milling mechanochemical method. After 1 h of milling, the process produces a material consisting of single crystalline domain nanoparticles having a diameter of about 8 nm. Chemical properties of the synthesized powders allow an easy functionalization with citric acid. Both as-obtained and functionalized samples show superparamagnetic behaviour at room temperature, and the functionalized powder is stably dispersible in aqueous media at physiological pH. The average hydrodynamic diameter is equal to similar to 60 nm. Nanoparticles obtained by the reported High-Energy Ball-Milling method can be synthesized with high yie…
Flash microwave synthesis of trevorite nanoparticles.
2008
Nickel ferrite nanoparticles have several possible applications as cathode materials for rechargeable batteries, named 'lithium-ion' batteries. In this study, NiFe{sub 2}O{sub 4} was prepared by microwave induced thermohydrolysis. The obtained nanoparticles were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), BET method, transmission electron microscopy (TEM) and small angle X-ray scattering (SAXS). All the results show that the microwave one-step flash synthesis leads in a very short time to NiFe{sub 2}O{sub 4} nanoparticles with elementary particles size close to 4-5 nm, and high specific surfaces (close to 240 m…
Synthesis of Titanate Nanotubes Directly Coated with USPIO in Hydrothermal Conditions: A New Detectable Nanocarrier
2011
International audience; Abstract: For the first time, titanate nanotubes (TiONts) coated with USPIO (ultrasmall superparamagnetic iron oxide) without polymer functionalization and directly obtained during TiONts formation is reported. The coating of these tubes was performed directly during the TiONts hydrothermal synthesis. After this treatment, in strongly basic conditions, USPIO particles kept their structure and magnetic properties while their size distribution slightly increased. By coupling zeta-potential measurements and TEM observations at different pH it appeared that interactions between nanotubes and USPIO were not electrostatic. This study presents the new design of a titanate n…
Synthesis of self-standing Pd nanowires via galvanic displacement deposition
2009
This work shows that it is possible to obtain self-standing Pd nanowires into anodic alumina membranes by a simple metal displacement deposition. By using a proper arrangement, specifically designed in order to optimize the process, polycrystalline Pd nanowires were deposited from a solution containing Pd(NH3)4(NO3)2 as precursor. Morphological analysis showed the formation of perfectly aligned nanowires with a uniform diameter throughout the entire length. This last parameter was controlled by both the deposition time and the ratio between the anodic area (active metal) and the cathodic area (pore bottom). Keywords: Displacement deposition, Template synthesis, Palladium nanowires, Alumina …
One-pot synthesis of ZnO nanoparticles supported on halloysite nanotubes for catalytic applications
2020
Abstract A versatile catalyst based on halloysite and zinc oxide (HNT@ZnO) was prepared, for the first time, starting from ZnO commercial bulk form as Zn precursor source, in a one-pot procedure. This strategy gives the possibility to obtain small ZnO nanoparticles loaded on the HNT surface without the use of inorganic salts which envisage the removal of undesired anions and therefore a calcination process at high temperature. It was found that the presence of halloysite improved the UV–vis spectral absorption ability of ZnO. The hybrid was successful used as photocatalyst for the methylorange and rhodamine B degradation. In addition, after eight consecutive cycles for the methylorange phot…
Advances in organic and organic-inorganic hybrid polymeric supports for catalytic applications
2016
In this review, the most recent advances (2014–2016) on the synthesis of new polymer-supported catalysts are reported, focusing the attention on the synthetic strategies developed for their preparation. The polymer-supported catalysts examined will be organic-based polymers and organic-inorganic hybrids and will include, among others, polystyrenes, poly-ionic liquids, chiral ionic polymers, dendrimers, carbon nanotubes, as well as silica and halloysite-based catalysts. Selected examples will show the synthesis and application in the field of organocatalysis and metal-based catalysis both for non-asymmetric and asymmetric transformations.
High-pressure synthesis of boron-rich chalcogenides B12S and B12Se
2022
The authors thank Drs. I. Dovgaliuk and T. Chauveau for assistance with Rietveld analysis; and Drs. V. Bushlya and A. Jamali for help with EDX/SEM measurements. This work was financially supported by the European Union's Horizon 2020 Research and Innovation Program under Flintstone2020 project (grant agreement No 689279).
Particle size effects on the structure and emission of Eu3+: LaPO4 and EuPO4 phosphors
2018
The authors acknowledge the financial support of the Ministry of Education, Science and Technological Development of the Republic of Serbia (Projects nos. 45020 and 172056). T.G acknowledges to the ERDF PostDoc project No. 1.1.1.2/VIAA/1/16/215 (1.1.1.2/16/I/001).