Search results for " absorption spectroscopy"
showing 10 items of 293 documents
Synchrotron Radiation-Based Micro-XANES and Micro-XRF Study of Unsuccessfully Produced Egyptian Blue from the Late Hellenistic Production Site of Kos…
2021
International audience; This paper examines the production technology of Egyptian blue, an ancient artificial pigment, through the investigation of an unsuccessfully produced pellet derived from the Hellenistic production site of Kos (Dodecanese, Greece). This heterogeneous material was investigated by a combination of laboratory and synchrotron radiation-based (SR) techniques: scanning electron microscopy coupled with energy-dispersive Xray spectrometry, micro-Raman spectroscopy, high-resolution SR micro-X-ray fluorescence spectroscopy, and SR micro-X-ray absorption near-edge structure spectroscopy (XANES), at the ID21 beamline of the European Synchrotron Radiation Facility. Principal comp…
Copper, iron and zinc determinations in human milk using FAAS with microwave digestion
2000
Abstract A method for determining copper, iron and zinc in human milk was optimized and validated. It includes microwave mineralization of the sample and measuring the elements by flame atomic absorption spectroscopy (FAAS). Only 2 ml of milk is needed, and the method is free of matrix interferences. The values obtained for the detection limits (0.07; 0.07; 0.11 μg/ml milk, for copper, iron and zinc) precision of the method, intra-assay (2.9; 5.2; 6.1%RSD for copper, iron and zinc) and accuracy, evaluated using recovery assays (98.8; 100.4; 95.9% for copper, iron and zinc) show that the method is useful for the purpose mentioned. Moreover, the method is rapid and simple, and the determinati…
On-line bidirectional electrostacking of chromium(III) and chromium(VI) for flame atomic absorption spectrometry determination
2000
Abstract An on-line bidirectional electrostacking-flow injection-flame atomic absorption spectrometry method has been developed for the simultaneous separation, pre-concentration and determination of Cr(III) and Cr(VI). The electrostacking-flow injection unit was established, the pH and components of the support buffer and sample medium were investigated. Results indicated that the ionic mobility, electric field strength and sample area cross-section are the main influence factors on the electrostacking. The calibration range for both, Cr(III) and Cr(VI), was from 20 to 400 μg l −1 . The limit of detection was 7 μg l −1 for three-times the standard deviation of blank values using a electros…
Flow injection flame atomic absorption analysis of Fe and Mn in cement samples
1993
A new procedure has been developed for the determination of Fe and Mn in cements. It consists in dispersing 50 mg of the solid sample in 25 ml of 0.15 mol/l HNO3 and 0.12 mol/l HCl solution. Acid slurries are heated at 50°C for 10 min and then different volumes of the slurry are injected into a water carrier stream. This previous acid treatment leaches the elements to be determined and permits the use of acid solutions as standards. For the Mn determination, the use of a single line flow injection manifold provides a limit of detection of 0.03 mgl−1 and a dynamic range up to 6 mgl−1. For the determination of Fe, the on-line dispersion of samples, using a well stirred mixing chamber, increas…
Determination of chromium(III) and chromium(VI) in mineral water by bidirectional electrostacking and electrothermal atomic absorption spectrometry
2001
Abstract A feasibility investigation was carried out on the use of bidirectional electrostacking for simultaneous separation and pre-concentration of Cr(III) and Cr(VI) and their electrothermal atomic absorption spectrometry (ETAAS) determination. The bidirectional electrostacking manifold was improved, and the effects of sample tube cross-section and electrostacking time on the pre-concentration factor were investigated. Results indicate that the sample tube cross-section and electrostacking time are the main influence factors on the electrostacking pre-concentration, as well as the electric field strength and ionic mobility. The method developed was suitable for the simultaneous separatio…
Atomic absorption spectrometric determination of molybdenum in lubricating oils with use of emulsions
1985
Abstract Samples (0.1 g) containing molybdenum disulphide are digested with aqua regia or with a (1 + 1) hydrofluoric/nitric acid mixture, without complete destruction of the matrix, and the molybdenum is determined in an air/acetylene flame, after emulsification with a non-ionic surfactant (Nemol K-39). The detection limit is ca. 30 μg Mo g−1, and the r.s.d. is 2.9% for 6 analyses of a sample containing 6.5 mg Mo g−1.
On-line microwave oven digestion flame atomic absorption analysis of solid samples
1990
Abstract A manifold has been developed for on-line microwave oven digestion and flame atomic absorption spectrometric (FAAS) determination of metallic elements in solid samples. The use of a closed flow system permits sample treatment before analysis by FAAS, the direct injection of slurries avoids a filtration step and the interconnection of two conventional rotary injection valves allows the rapid introduction of samples and standards. The determination of lead in sewage sludge was employed as a test system for the proposed on-line sample digestion manifold. The procedure has a limit of detection of 0.2 μg Pb g−1.
A comparative study of flame atomic-absorption methods for determination of zinc in serum and blood plasma
1983
Seven selected methods for determination of zinc in blood plasma by flame atomic-absorption spectroscopy have been compared. Analytical characteristics such as sensitivity, detection limit, precision, analytical recovery, accuracy and physical interferences were studied. Two of the seven methods are recommended as the most suitable for the purpose.
Direct determination of lead in human milk by electrothermal atomic absorption spectrometry
1999
Abstract Infants are particularly sensitive to the toxic effects of lead. Since milk is their only or main food it is important to know the contribution of milk to lead intake. The purpose of this study was to develop a direct method for determining the lead content of human milk by electrothermal atomic absorption spectrometry when a deuterium lamp is the only background correction available. The optimum conditions for lead determination in breast milk: sample dilution in Triton ×-100, modifier (75 μg of palladium) and nitric acid contents (2%) and the graphite furnace program (mineralization: 1100°C; atomization: 2300°C) were selected. The analytical parameters are: linearity (20–300 ng m…
Simultaneous determination of As, Cd, Cr and Pb in aqua regia digests of soils and sediments using electrothermal atomic absorption spectrometry and …
2002
A method was developed for the simultaneous multi-element determination of As, Cd, Cr and Pb in aqua regia digests of soils and sediments using an electrothermal atomic absorption spectrometer with a transversely heated graphite atomizer and longitudinal Zeeman-effect background correction. A fast furnace program with no pyrolysis stage or chemical modifier was used, and the total duration of the time-temperature program of the graphite furnace was 45 s. The method detection limits calculated from blank samples were 9.5 μg l−1, 0.18 μg l−1, 6.2 μg l−1 and 2.5 μg l−1 for As, Cd, Cr and Pb, respectively. Sample preparation procedures are briefly described. The accuracy of the method was confi…