Search results for " array"
showing 10 items of 895 documents
Detection, characterization and sizing of hydrogen induced cracking in pressure vessels using phased array ultrasonic data processing
2016
Abstract Pressure vessels operating in sour service conditions in refinery environments can be subject to the risk of H₂S cracking resulting from the hydrogen entering into the material. This risk, which is related to the specific working conditions and to the quality of the steel used, shall be properly managed in order to maintain the highest safety at a cost-effective level. Nowadays the typical management strategy is based on a risk based inspection (RBI) evaluation to define the inspection plan used in conjunction with a fitness for service (FFS) approach in defining if the vessel, although presenting dangerous defects such as cracks, can still be considered “fit for purpose” for a giv…
A Selective Change Driven System for High-Speed Motion Analysis.
2016
Vision-based sensing algorithms are computationally-demanding tasks due to the large amount of data acquired and processed. Visual sensors deliver much information, even if data are redundant, and do not give any additional information. A Selective Change Driven (SCD) sensing system is based on a sensor that delivers, ordered by the magnitude of its change, only those pixels that have changed most since the last read-out. This allows the information stream to be adjusted to the computation capabilities. Following this strategy, a new SCD processing architecture for high-speed motion analysis, based on processing pixels instead of full frames, has been developed and implemented into a Field …
A wavelet-based demosaicking algorithm for embedded applications
2010
This paper presents an alternative to the spatial reconstruction of the sampled color filter array acquired through a digital image sensor. A demosaicking operation has to be applied to the raw image to recover the full-resolution color image. We present a low-complexity demosaicking algorithm processing in the wavelet domain. Produced images are available at the output of the algorithm either in the spatial representation or directly in the wavelet domain for high-level post processing in the latter domain. Results show that the computational complexity has been lowered by a factor of five compared to state of the art demosaicking algorithms.
Optimal extension of multispectral image demosaicking algorithms for setting up a one-shot camera video acquisition system
2022
Multispectral images are acquired using multispectral cameras equipped with CCD or CMOS sensors which sample the visible or near infrared spectrum according to specific spectral bands. A mosaic of multispectral MSFA filters is superimposed on the surface of the sensors to acquire a raw image called an MSFA image. In the MSFA image, only one spectral band is available per pixel, the demosaicking process is necessary to estimate the multispectral image at full spatio-spectral resolution. Motivated by the success of single-sensor cameras capturing the image in a single exposure that use CFA filters, we performed a comparative study of a few recent color image demosaicking algorithms and experi…
Influence of the differentiation system on the analytical parameters for the spectrophotometric determination of clonazepam in urine
1991
Abstract Electronic and mathematical differentiation of the ultraviolet visible spectra were compared from the study of the analytical parameters of the direct determination of clonazepam in urine samples. Third-order derivative spectra were used. The mathematical differentiation provides higher sensitivity, a lower limit of detection, and better accuracy and precision than the electronic one. The use of a diode array instrument provides lower sensitivity than that found using a conventional spectrometer; however, the limit of detection obtained in both cases is of the same order.
Exploring hand-portable nano-liquid chromatography for in place water analysis: Determination of trimethylxanthines as a use case.
2020
Abstract Analytical performance and optimization of figures of merit of a portable nano liquid chromatograph (NanoLC) with UV detection at 255 nm have been established for in place analysis. Methylxanthines: caffeine, theophylline and theobromine were selected as target analytes. A fast lab method based on IT-SPME coupled on line with capillary liquid chromatograph (CapLC) with diode array detection (DAD) was employed for comparative studies. IT-SPME and solid phase extraction were coupled off-line to NanoLC for improving instrumental parameters, mainly detection capacity and selectivity. IT-SPME or SPE/portable NanoLC based methods were superior in terms of chromatographic resolution and o…
Estimation of the presence of unmetabolized dialkyl phthalates in untreated human urine by an on-line miniaturized reliable method
2015
Abstract At present, human exposure to dialkyl phthalates is assessed through urinary measurement of their metabolites due mainly to contamination in their analysis by their ubiquitous presence. An on-line miniaturized method and the processing of the untreated urine samples have been the key factors for minimizing contamination and achieving unbiased results. Di(2-ethylhexyl) (DEHP), diethyl (DEP), dibutyl (DBP) and mono-ethylhexyl (MEHP) phthalates in urine samples have been included in the study; MEHP as metabolite of the main dialkyl phthalate such as DEHP. On-line in-tube solid-phase microextraction (IT-SPME)-capillary liquid chromatography (CapLC) with diode array detection (DAD) is e…
Conceptual design of the TRACE detector readout using a compact, dead time-less analog memory ASIC
2015
[EN] The new TRacking Array for light Charged particle Ejectiles (TRACE) detector system requires monitorization and sampling of all pulses in a large number of channels with very strict space and power consumption restrictions for the front-end electronics and cabling. Its readout system is to be based on analog memory ASICs with 64 channels each that sample a View the MathML source window of the waveform of any valid pulses at 200 MHz while discarding any other signals and are read out at 50 MHz with external ADC digitization. For this purpose, a new, compact analog memory architecture is described that allows pulse capture with zero dead time in any channel while vastly reducing the tota…
Transfer matrix method applied to the parallel assembly of sound absorbing materials
2013
International audience; The transfer matrix method (TMM) is used conventionally to predict the acoustic properties of laterally infinite homogeneous layers assembled in series to form a multilayer. In this work, a parallel assembly process of transfer matrices is used to model heterogeneous materials such as patchworks, acoustic mosaics, or a collection of acoustic elements in parallel. In this method, it is assumed that each parallel element can be modeled by a 2 × 2 transfer matrix, and no diffusion exists between elements. The resulting transfer matrix of the parallel assembly is also a 2 × 2 matrix that can be assembled in series with the classical TMM. The method is validated by compar…
Performance of the Fully Digital FPGA-Based Front-End Electronics for the GALILEO Array
2014
In this work we present the architecture and results of a fully digital Front End Electronics (FEE) read out system developed for the GALILEO array. The FEE system, developed in collaboration with the Advanced Gamma Tracking Array (AGATA) collaboration, is composed of three main blocks: preamplifiers, digitizers and preprocessing electronics. The slow control system contains a custom Linux driver, a dynamic library and a server implementing network services. The digital processing of the data from the GALILEO germanium detectors has demonstrated the capability to achieve an energy resolution of 1.53 per mil at an energy of 1.33 MeV.