Search results for " beam"
showing 10 items of 1274 documents
Investigations of TiO2 films deposited by different techniques
1991
High refractive TiO2 films deposited by reactive electron beam evaporation, reactive ion plating and dip coating have been characterized by optical spectroscopy, electron spectroscopy for chemical analysis, Rutherford backscattering spectroscopy, nuclear reaction analysis and Raman spectroscopy. The spectral refractive index n exhibits a strong dependence on the deposition conditions. These findings will be connected to variations in density, stoichiometry, hydrogen content (H2O) and binding structure of the layers. A strong correlation is found between optical quantities and microscopic properties of TiO2 films.
First Fourier-transform ion cyclotron resonance signals of very highly charged atomic ions
1994
We report on the first application of Fourier-transform ion cyclotron resonance mass spectrometry to the very highly charged ions produced in the high-energy electron beam ion trap (SuperEBIT) at the Lawrence Livermore National Laboratory. Initial results are described, and spectra are presented from ions as highly charged as Cs53+.
Resonant Ionization Laser Ion Source for Radioactive Ion Beams
2009
A resonant ionization laser ion source based on all‐solid‐state, tunable Ti:Sapphire lasers is being developed for the production of pure radioactive ion beams. It consists of a hot‐cavity ion source and three pulsed Ti:Sapphire lasers operating at a 10 kHz pulse repetition rate. Spectroscopic studies are being conducted to develop ionization schemes that lead to ionizing an excited atom through an auto‐ionization or a Rydberg state for numerous elements of interest. Three‐photon resonant ionization of 12 elements has been recently demonstrated. The overall efficiency of the laser ion source measured for some of these elements ranges from 1 to 40%. The results indicate that Ti:Sapphire lase…
Vulvar and Vaginal Cancers
2021
Vulvar cancer and vaginal cancer are relatively rare tumors, typically affecting elder women, although they still represent the fourth and fifth, respectively, most common cancers in the gynecologic oncology field. Treatment of the early stages includes surgery and radiotherapy (external beam radiotherapy and brachytherapy). The sentinel lymph node sampling procedure is becoming the new standard of care in vulvar cancer. Chemotherapy has a role in combination with radiotherapy for the locoregional management or as palliative therapy for stage IV patients.
Demonstration of an efficient pumping scheme for a 7.36-nm Ni-like samarium soft x-ray laser
2010
The demonstration of a 7.36 nm Ni-like Sm soft x-ray laser pumped by 36 J of a Nd:glass chirped pulse amplification laser is presented. Double-pulse single-beam non-normal incidence pumping was applied for the efficient soft x-ray laser generation. Here the applied technique included a new single optic focusing geometry for large beam diameters, a single-pass grating compressor traveling-wave tuning capability and an optimized high energy laser double-pulse. This scheme has the potential for even shorter wavelength soft x-ray laser pumping.
Ytterbium-doped fibers for high-power fiber lasers
2021
Ytterbium (Yb) doped optical fibers are widely used in high-power applications and ultrafast lasing since they show adequate power-handling capability and provide desirable beam quality. Yb-doped fibers with large core area can support high power but often act as a multimode fiber and compromise the output beam quality. Hence, it is important to attain a proper balance between the power-handling capability and the beam quality. Yb-doped fibers as a gain medium in pulsed fiber laser systems are prone to nonlinear optical effects due to the presence of high peak power in the ultrashort pulses. Nonlinearity such as self phase modulation (SPM) affects the width and the shape of the pulse, both …
MoSi2 laser cladding—elaboration, characterisation and addition of non-stabilized ZrO2 powder particles
2003
International audience; The cladding process using laser beam radiation comprises different operational regimes, depending on the involved lasers (usually CO2 or Nd:YAG) and materials. A series of experiments has been carried out to investigate Nd:YAG laser cladding using MoSi2 powder. Procedures and operating parameters for producing clad layers has been developed and their properties evaluated. The feasibility of the laser cladding technique, using a high power Nd:YAG laser, by projecting MoSi2 powder on steel substrate was demonstrated. The results indicate a low density of cracks, elevated powder catchment efficiency (between 65 and 90%) and hardness values around 1200–1300 HV. Our goal…
Magnesium alloys (WE43 and ZE41) characterisation for laser applications
2004
International audience; One of the most important parameters in laser treatment is the quantity of beam energy absorbed by the substrate. Despite its important role played in laser processes, this factor is rarely available for the laser sources wavelengths and at high temperatures reached during such treatments. A series of experiments were carried out in order to characterise, from this point of view, two types of magnesium alloys, WE43 and ZE41, often used in laser applications (cladding, alloying, welding, etc.). The results represent an important step in order to understand Mg-alloys behaviour under laser beam action.
MoSi2 laser cladding—A new experimental procedure: double-sided injection of MoSi2 and ZrO2
2003
International audience; In the last decade, development of low density advanced material systems for service at temperatures up to 1300 °C was one of the goals of many researches. This kind of material should mainly have moderate fracture toughness and should exhibit oxidation resistant behaviour at low and intermediate temperature. One of the most studied materials continues to be the intermetallic compound MoSi2. The molybdenum disilicide has been considered as an attractive candidate due to its melting point (2030 °C) and excellent oxidation resistance at high temperatures. The main problem associated with the MoSi2 layer synthesized using laser beam is the layer fragility. To avoid this…
Light scattering - diagnostic methods for colloidal dispersions
1993
Abstract The increasing demand from the colloid research community for quick and noninvasive experimental techniques as well as the rapid progress of modern optics and electronics have led to a considerable expansion in the field of light scattering. This review introduces the basic concepts with some emphasis on novel approaches like the study of interacting particle systems, multiple scattering techniques, and non ergodic samples. Particular attention is then devoted to recent experimental progress towards more compact and rugged instruments.