Search results for " composites"
showing 10 items of 1620 documents
Single particle jumps and correlated ionic motions in glass-ceramics
1993
Using impedance spectroscopy, the ion transport in poorly Li-conducting aluminosilicate glass ceramics and their precursor glasses has been measured for temperatures 50 K < T < 550 K and covering a frequency range of more than 14 decades from 10 mHz up to 3 THz. In addition to the familiar cooperative ionic motion dominating at high temperatures, for the first time dielectric relaxation due to elementary hopping processes is observed well below room temperature.
Study of morphology, mechanical properties, and thermal degradation of polycarbonate-titania nanocomposites as function of titania crystalline phase …
2013
Titania nanoparticles were prepared using a sol–gel method and calcination at 2008C and 6008C to obtain anatase and rutile phases, respectively. The obtained powders were used to prepare polycarbonate (PC)-titania nanocomposites by melt compounding. The effect of different crystalline phases and amounts of titania, in the range 1–5 wt%, on the morphology, mechanical properties, and thermal degradation kinetics of PC was investigated. The results show that the filler modified the plasticity or rigidity of the polymer and influenced the degradation kinetics, in different ways depending on the type and amount of titania. POLYM. COMPOS.,
Fine tuning of the catalytic effect of a metal-free porphyrin on the homogeneous oxygen reduction.
2011
The catalytic effect of tetraphenylporphyrin on the oxygen reduction with ferrocene in 1,2-dichloroethane can be finely tuned by varying the molar ratio of the acid to the catalyst present in the solution. The mechanism involves binding of molecular oxygen to the protonated free porphyrin base, in competition with ion pairing between the protonated base and the acid anion present.
Hybrid Molecular Materials Based upon Organic π-Electron Donors and Inorganic Metal Complexes. Conducting Salts of Bis(ethylenediseleno)tetrathiafulv…
2002
Abstract The synthesis, structure and physical characterization of three new radical salts formed by the organic donor bis(ethylenediseleno)tetrathiafulvalene (BEDS-TTF or BEST) and the paramagnetic hexacyanoferrate(III) anion [Fe(CN)6]3− or the photochromic nitroprusside anion [Fe(CN)5NO]2− are reported: (BEST)4[Fe(CN)6] (1), (BEST)3[Fe(CN)6]2·H2O (2) and (BEST)2[Fe(CN)5NO] (3). Salts 1 and 3 show a layered structure with alternating organic (β–type packing) and inorganic slabs. Salt 2 shows an original interpenetrated structure probably due to the unprecedented presence of (BEST)2+ dications. The three salts are semiconductors although salt 1 exhibits a high room temperature conductivity …
Hydrolytic degradation of PLA/Posidonia Oceanica green composites: A simple model based on starting morpho-chemical properties
2021
Abstract In this work, we studied the degradability of PLA-based biocomposites containing Posidonia Oceanica flour at different loading levels and aspect ratios. Hydrolytic tests were carried out in neutral (pH = 7.4) and alkaline (pH = 10) environment. Time-dependent evolution of some key features, including residual mass and solution uptake, was monitored, and correlated with the changes observed in both morphology and chemical structure of the matrix. The results pointed out that biocomposites degraded much faster than neat PLA in both conditions, up to lose 70% of their initial weight after 1000 h immersion. A complex mechanism was unveiled, evidencing the crucial role of the fillers, c…
High performance PA6/CNTs nanohybrid fibers prepared in the melt
2012
Commercial and home-made carbon nanotubes (CNTs) were plasma treated under oxygen atmosphere and then added to polyamide 6 (PA6) in order to prepare fibres by melt spinning. For comparison, pristine nanofillers were used too. The effect of functionalization and of filler characteristics on the morphological, rheological, mechanical and electrical properties of the fibres was studied by TEM and SEM, rheological measurements, tensile and electrical conductivity tests. The results demonstrated that the functionalization led to a better mechanical performance and the morphological analysis confirmed that the adhesion, the dispersion and the alignment of the nanotubes within the polymer matrix w…
Synthesis and crystal structure of Na1+xV4P4O17(OH) (x ≈ 1.44)
1990
Abstract Hydrothermal synthesis starting from Na0.46VOPO4 · 1.58H2O leads to a new mixed-valence sodium vanadium phosphate: Na2.44V4P4O17(OH) (orthorhombic, space group Pnma; Z = 4; a = 13.723(5) A, b = 6.314(2) A, c = 16.139(4) A; R = 0.032 for 2659 reflections). In this phase, the interconnection of three complex types of infinite chains, built from VO6 octahedra and PO4 tetrahedra, sometimes edgeshared, defines tunnels partly occupied by a portion of the sodium atoms.
Electrochemical synthesis of sulfamides.
2021
Herein we demonstrate the first electrochemical synthesis protocol of symmetrical sulfamides directly from anilines and SO2 mediated by iodide. Sulfamides are an emerging functional group in drug design. Highlights are the direct use of SO2 from a stock solution and no necessity of any supporting electrolyte. Overall, the reaction has been demonstrated for 15 examples with yields up to 93%.
Effective conductivity in association with model structure and spatial inhomogeneity of polymer/carbon black composites
1996
The relationship between effective conductivity and cell structure of polyethylene/carbon composites as well as between effective conductivity and spatial distribution of carbon black are discussed. Following Yoshida's model both structures can, in a way, be said to be intermediate between the well known Maxwell-Garnett (MG) and Bruggeman (BR) limiting structures. Using TEM photographs on composites with various carbon blacks we have observed that the larger is Garncarek's inhomogeneity measure H of two-dimensional (2D) representative distribution of the carbon black, the smaller is the effective conductivity of the composite.
Heterogeneity at the glass transition: a review
1999
Theoretical concepts and experimental evidence of heterogeneity in glass-forming liquids and polymers are reviewed. The main purpose is to provide an introduction to theoretical developments and recent experiments which have led to rapidly increasing knowledge. Realizing that there is no consensus in regard to the various scenarios of the glass transition starting from rather different assumptions we try to give a balanced overview although we also compare and interrelate some of the approaches. The experimental part describes recent nuclear magnetic resonance, dielectric, and optical experiments from which dynamically distinguishable subensembles can be selected thus proving the existence …