Search results for " diffraction"

showing 10 items of 896 documents

X-ray diffraction measurements of Mo melting to 119 GPa and the high pressure phase diagram

2009

In this paper, we report angle-dispersive X-ray diffraction data of molybdenum melting, measured in a double-sided laser-heated diamond-anvil cell up to a pressure of 119 GPa and temperatures up to 3400 K. The new melting temperatures are in excellent agreement with earlier measurements up to 90 GPa that relied on optical observations of melting and in strong contrast to most theoretical estimates. The X-ray measurements show that the solid melts from the bcc structure throughout the reported pressure range and provide no evidence for a high temperature transition from bcc to a close-packed structure, or to any other crystalline structure. This observation contradicts earlier interpretation…

MolybdenumShock wave effectsDiffractionMaterials scienceShock (fluid dynamics)General Physics and Astronomychemistry.chemical_elementThermodynamicsMeltingCrystal structureAcoustic wave velocity ; High-pressure effects ; Melting ; Molybdenum ; Phase diagrams ; Shock wave effects ; X-ray diffractionX-ray diffractionUNESCO::FÍSICA::Química físicaHigh-pressure effectsCrystallographychemistryAcoustic wave velocityMolybdenumSpeed of soundHigh pressureX-ray crystallographyPhase diagramsPhysical and Theoretical Chemistry:FÍSICA::Química física [UNESCO]Phase diagram
researchProduct

The influence of the raw material and production method on the morphology, microstructure, chemical and phase composition of tetrabasic lead sulfate …

1992

Abstract Tetrabasic lead sulfate (4BS) produced by two different methods (solution and paste) and from two different raw materials (tetragonal PbO and leady oxide) were charaterized by different analytical techniques. The techniques applied were wet-chemical methods, scanning electron microscopy, transmission electron microscopy and X-ray powder diffraction. The preparation method was observed to be the most decisive factor influencing the structure and the morphology of the 4BS pastes in this study.

Morphology (linguistics)Renewable Energy Sustainability and the EnvironmentScanning electron microscopeChemistryOxideEnergy Engineering and Power TechnologyMineralogyRaw materialMicrostructureTetragonal crystal systemchemistry.chemical_compoundChemical engineeringTransmission electron microscopyElectrical and Electronic EngineeringPhysical and Theoretical ChemistryPowder diffractionJournal of Power Sources
researchProduct

Synthesis and characterization of indium oxide at high pressures

2018

Introducción: La naturaleza es sorprendente pero a la vez limitada. A mi entender, nada tiene más potencial que aplicar el ingenio humano para modificar lo que nos rodea y crear algo completamente nuevo. La Física de la Materia Condensada es un campo que actualmente está ganando importancia en la Física moderna. En virtud de los éxitos logrados en Física de la Materia Condensada se han producido enormes avances en el campo de la electrónica cuántica, de los semiconductores y de la ciencia de materiales, teniendo como resultado numerosas aplicaciones tecnológicas que han cambiado nuestras vidas drásticamente en los últimos 50 años. Una de las ramas de la Física de la Materia Condensada es el…

Multi-anvil pressDiamond-anvil cellCharacterization under pressureOptical absorptionPressure sensorUNESCO::FÍSICAEquations of stateNanocrystallinePressure transmitting mediumBulkPressure-temperature phase diagramParis-Edinburg pressX-ray diffractioncorundum-type structure (R-3c):FÍSICA [UNESCO]Indium oxide (In2O3)Raman spectroscopycubic structure (Ia-3)High-pressure high-temperature synthesisPbcn phaseAb initio calculationsPbca phaseScanning electron microscopySynchrotron radiation sources
researchProduct

Unraveling the packing pattern leading to gelation using SS NMR and X-ray diffraction: direct observation of the evolution of self-assembled fibers

2010

A detailed understanding of the mode of packing patterns that leads to the gelation of low molecular mass gelators derived from bile acid esters was carried out using solid state NMR along with complementary techniques such as powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and polarizing optical microscopy (POM). Solid state 13C{1H} cross polarization (CP) magic angle spinning (MAS) NMR of the low molecular mass gel in its native state was recorded for the first time. A close resemblance in the packing patterns of the gel, xerogel and bulk solid states was revealed upon comparing their 13C{1H}CPMAS NMR spectral pattern. A doublet r…

NMR spectra databaseCrystallographyDifferential scanning calorimetrySolid-state nuclear magnetic resonanceChemistryX-ray crystallographyMagic angle spinningResonanceGeneral ChemistrySinglet stateCondensed Matter PhysicsPowder diffractionSoft Matter
researchProduct

One-step growth of isolated CdO nanoparticles on r-sapphire substrates by using the spray pyrolysis methodology

2014

In spite of the remarkable properties of CdO, there are only a few reports on CdO nanostructures, especially on isolated NPs. In this paper, we analyze the growth of isolated CdO nanoparticles (NPs) on 0.5° miscut r-sapphire substrates by using the spray pyrolysis methodology in its classical configuration. A systematic study has been performed to optimize the growth parameters such as precursor concentration, growth time, spray rate and growth temperature to obtain CdO NPs (size: 6–10 nm to 35–100 nm depending on the growth conditions). The study shows the control over the size and density of the CdO nanoparticles that can be achieved by adjusting the growth parameters. The CdO nanoparticl…

NanostructureMaterials scienceChemical engineeringX-ray photoelectron spectroscopyTransmission electron microscopyGeneral Chemical EngineeringNucleationNanoparticleNanotechnologyGeneral ChemistrySubstrate (electronics)CrystalliteSelected area diffractionRSC Advances
researchProduct

Electrochemical deposition of Ag2Se nanostructures

2017

Abstract AgSe based nanostructures (nanowires or nanotubes) were obtained by electrodeposition. A systematic investigation was carried out, varying concentration of the precursors, pH of the electrolytic solution, ligands, and deposition mode, to study the effect of all these parameters on the growth of nanostructures. Nanostructure morphology depends also on the type of metal that was used as support, due to the secondary reaction of hydrogen evolution. On Ni support, the H2 evolution reaction led to formation of only nanotubes, while on copper substrate also nanowires were obtained. Composition of nanostructures depends strongly on solution pH. X-ray diffraction and Raman spectroscopy sho…

NanostructureMaterials scienceNanostructureNanowire02 engineering and technologyElectrolyteCondensed Matter PhysicInorganic compound010402 general chemistryElectrochemistry01 natural sciencesChemical synthesiMetalsymbols.namesakeGeneral Materials ScienceMechanics of MaterialMechanical Engineering021001 nanoscience & nanotechnologyCondensed Matter Physics0104 chemical sciencesX-ray diffractionCrystallographySettore ING-IND/23 - Chimica Fisica ApplicataChemical engineeringMechanics of Materialsvisual_artX-ray crystallographyRaman spectroscopyvisual_art.visual_art_mediumsymbolsOrthorhombic crystal systemMaterials Science (all)0210 nano-technologyRaman spectroscopy
researchProduct

Initial stages of self-assembled InAs/InP(001) quantum wire formation

2007

4 páginas, 2 figuras.-- PACS codes: 78.67.Lt; 68.65.La; 68.37.Ps.-- Comunicación oral presentada a la 14ª International Conference on Molecular Beam Epitaxy - MBE XIV celebrada en Tokio (Japón) del 3 al 8 de Septiembre de 2006.

NanostructureMaterials scienceReflection high-energy electron diffractionCondensed matter physicsQuantum wireA3. Molecular beam epitaxyRelaxation (NMR)NucleationB2. Semiconducting indium phosphideCondensed Matter PhysicsA1. NucleationInorganic ChemistryReflection (mathematics)Electron diffractionA1. NanostructuresMaterials ChemistryMolecular beam epitaxyJournal of Crystal Growth
researchProduct

Synthesis and characterization of highly ordered cobalt-magnetite nanocable arrays.

2006

Magnetically tunable, high-density arrays of coaxial nanocables within anodic aluminum oxide (AAO) membranes have been synthesized. The nanocables consist of magnetite nanowires surrounded by cobalt nanotube sheaths and cobalt nanowires surrounded by magnetite nanotube sheaths. These materials are a combination of separate hard (Co) and soft (Fe3O4) magnetic materials in a single nanocable structure. The combination of two or more magnetic materials in such a radial structure is seen as a very powerful tool for the future fabrication of magnetoresistive, spin-valve and ultrafast spin-injection devices with nonplanar geometries. The nanocable arrays were prepared using a supercritical-fluid …

NanotubeFabricationMaterials scienceMagnetoresistanceSurface PropertiesNanowirechemistry.chemical_elementNanotechnologylaw.inventionBiomaterialschemistry.chemical_compoundMagneticsMicroscopy Electron TransmissionX-Ray DiffractionlawAluminum OxideNanotechnologyGeneral Materials ScienceParticle SizeMagnetiteNanotubesNanowiresMagnetic storageTemperatureGeneral ChemistryCobaltFerrosoferric OxidechemistryNanoparticlesCoaxialCobaltBiotechnologySmall (Weinheim an der Bergstrasse, Germany)
researchProduct

Preparation and recrystallization behavior of spray-dried co-amorphous naproxen–indomethacin

2016

To improve the dissolution properties and the physical stability of amorphous active pharmaceutical ingredients, small molecule stabilizing agents may be added to prepare co-amorphous systems. The objective of the study was to investigate if spray-drying allows the preparation of co-amorphous drug-drug systems such as naproxen-indomethacin and to examine the influence of the process conditions on the resulting initial sample crystallinity and the recrystallization behavior of the drug(s). For this purpose, the process parameters inlet temperature and pump feed rate were varied according to a 2(2) factorial design and the obtained samples were analyzed with X-ray powder diffractometry and Fo…

NaproxenRecrystallization (geology)Materials scienceIndomethacinPharmaceutical Science02 engineering and technology030226 pharmacology & pharmacylaw.invention03 medical and health sciencesCrystallinityNaproxen0302 clinical medicinelawmedicineCrystallizationDissolutionAnti-Inflammatory Agents Non-SteroidalGeneral MedicineFactorial experiment021001 nanoscience & nanotechnologyAmorphous solidCrystallographyChemical engineeringSpray dryingCrystallization0210 nano-technologyPowder DiffractionBiotechnologymedicine.drugEuropean Journal of Pharmaceutics and Biopharmaceutics
researchProduct

Investigation of composition of archeological Helmets, type Montefortino

2019

In this work, a preliminary non invasive and non destructive investigation, performed on two helmets, is presented.

Neutron diffraction XRF Cu based alloysHelmets Montefortino type
researchProduct