Search results for " equipment."
showing 10 items of 314 documents
Oil filled MV/LV Power Transformer Behavior in Narrow Band Power Line Communication Systems
2012
The aim of this paper is to characterize oil-filled power transformers in the narrow-band power-line communication (PLC) frequency range of 50-150 kHz. A new model is proposed for such type of a transformer, in the aforementioned frequency range of interest, in order to study its influence on the signal transmission and to investigate the possibility that the PLC signal can cross the power transformer itself. The new model is simpler than those previously proposed in literature, and it can be used in the whole frequency range available for NB PLC according to the CENELEC EN 50065-1 A-band. In order to validate the model, simulation and measurement results are compared for four oil-filled po…
Integrating Manufacturing Equipments Using a Shop Floor Control System
2006
A generic manufacturing system must interact with an environment characterized by a strong competition and by continuous technological changes. For this reason there is the necessity to make the system easily and economically modifiable in its hardware and software configuration. One of the main problems in making a manufacturing system re-configurable concerns its control system which has to be accordingly scalable and object oriented. This paper presents a methodology for making a manufacturing control system actually reconfigurable and adaptable to hardware changes in the manufacturing systems components. In particular, a PC-based shop-floor control system has been realized. Such system …
Genetic Algorithm Optimized Grid-based RF Fingerprint Positioning in Heterogeneous Small Cell Networks
2015
In this paper we propose a novel optimization algorithm for grid-based RF fingerprinting to improve user equipment (UE) positioning accuracy. For this purpose we have used Multi-objective Genetic Algorithm (MOGA) which enables autonomous calibration of gridcell layout (GCL) for better UE positioning as compared to that of the conventional fingerprinting approach. Performance evaluations were carried out using two different training data-sets consisting of Minimization of Drive Testing measurements obtained from a dynamic system simulation in a heterogeneous LTE small cell environment. The robustness of the proposed method has been tested analyzing positioning results from two different area…
Measurement Issues for the Characterization of Medium Voltage Grids Communications
2013
This paper is focused on the measurement issues and procedures for the characterization of medium voltage grids for narrowband power line communications (NB-PLCs), in the perspective of the use and integration of such technology into smart grids communication networks. The fundamentals are given for the characterization of the PLC channel, by means of noise and attenuation measurements. Suitable procedures are also developed for the characterization and modeling of the power system components in the frequency range of interest. Furthermore, the complete model of the PLC system is experimentally validated in a real case study.
Optical Fibre Control-Measurement Systems Of Compound HV/HP Electrical Equipment
1988
Responsible electrical equipment should be controlled during the work in care of their high reliability. Traditional control measurement systems cannot fulfil the task because of the hard conditions in which the equipment may operate (various electrical potentials, electromagnetic interferences, changes of temperature, etc.). The development of fibre optic transmission media and fibre optic sensors allows the construction of new control measurement systems for cooperation with such electrical equipment as: converters, generators, treLnsforniens, switch bays, busbards, etc. Those optical fibre structures, composed of bu-ses and sensors are subject of this paper. The main attention is paid to…
Research Toward The Optical Equipment For An Autonomous Robot For TviV Environment
1989
The paper consists of three major parts: basic technical problems in very high power/megavolt environment, signal processing and mechanical equipment for this environment, construction of a sensor equipped robot for this environment. The first part contains mainly metrological confinements and reliability considerations for the optical, optoelectronic and electronic part of a system. The second part contains mechanics and robotics problems. The result of these two parts is a choice of a system to be realized.
Medium Voltage Smart Grid: Experimental Analysis of Secondary Substation Narrow Band Power Line Communication
2013
This paper is focused on the possibility of employing narrow band power line communication (PLC) in medium voltage (MV) distribution networks. The topic is investigated by means of both simulations and experimental tests, which were carried out in the distribution network of Ustica Island. In detail, a two-way MV communication was tested between two secondary substations connected by an MV cable power line. Each substation has a by-pass connection at MV bus-bars and an MV/LV oil filled power transformer. In this paper, the MV and the PLC systems under test are described and the experimental tests are presented, which were carried out to evaluate the parameters of the simulation model. The a…
Controlled Fault-Tolerant Power Converters for Power Quality Enhancement
2013
Power quality depends generally on the interaction of electrical power with electrical equipments. If electrical equipments operate correctly and reliably without being damaged or stressed, a suitable level of power quality is assured. On the other hand, if the electrical equipment malfunctions, is unreliable, or is damaged during normal usage, power quality is poor and probably the economical loss could be important like the technical one. In the scenario of the Distributed Generation, power quality issues will be moreover important because an higher dissemination of power conditioning equipment will be requested and this obviously increases the sources of vulnerability of the electrical s…
Compact instrumentation for radiation tolerance test of flash memories in space environment
2010
Aim of this work is the description of a test equipment, designed to be integrated on board of a microsatellite, able to investigate the radiation tolerance of non-volatile memory arrays in a real flight experiment. An FPGA-based design was adopted to preserve a high flexibility degree. Besides standard Program/Read/Erase functions, additional features such as failure data screening and latch-up protection have been implemented. The instrument development phase generated, as a by-product, a non-rad-hard version of the instrument that allowed performing in-situ experiments using 60Co and 10 MeV Boron irradiation facilities on Ground. Preliminary measurement results are reported to show the i…
Effect of Channel-Quality Indicator Delay on HSDPA Performance
2007
This paper evaluates the effect of the channel estimation inaccuracy on the performance of an HSDPA system. This study provides some results from system level simulations that have been conducted over a very complete dynamic simulator which models an HSDPA system full compliant with specifications. This emulator allows performing multi-user transmission and link adaptation with a limited modulation and coding scheme (MCS) selection based on the channel quality indicator (CQI) modes. Many factors such as the user equipment (UE) speed, the employed scheduling algorithm or the traffic load have been considered in the assessment. Moreover the intrinsic constraints of a WCDMA system like HSDPA h…