Search results for " industry."
showing 10 items of 2285 documents
The feasibility of pulsed light processing in the meat industry
2019
Abstract Today, the increasing demand for minimally processed foods that are nutritious, sensorially acceptable, and free from microbial, chemical and physical hazards, challenges research and development to establish alternative methods to reduce the level of bacterial contamination. As one of the newly developing non-thermal methods, pulsed light is a technology for the fast, mild, and residue-free surface decontamination of meat and meat contact materials in the meat processing environment. This review provides specific information on pulsed light technology and the feasibility of its application for unpackaged and packaged meat and meat products as well as meat contact materials. The ad…
Material Substitution for Automotive Applications: A Comparative Life Cycle Analysis
2012
Lightweight materials have become an important strategy in the automotive industry to enable vehicle weight reduction and reduce fuel consumption. However, when developing specific strategies, the overall benefits of any material should be analyzed throughout its life cycle to comprehend energy/environmental differences that arise during its processing and its final use. A key example is aluminum which despite having great potential in the use phase requires large amounts of energy to process. This paper provides a comparison between aluminum and steel utilizing a life-cycle approach. This approach reveals the importance of incorporating a recycling strategy to leverage aluminum’s low-weigh…
Effect of Temperature on N2O and NO Emission in a Partial Nitrification SBR Treating Reject Wastewater
2017
Temperature is a very important parameter during nitritation, having a direct effect on ammonia oxidation rate (AOR) and enzymatic activities which relate to both N2O and NO emission. This study aims at investigating the effect of temperature on AOR, N2O and NO production in an enriched ammonia oxidizing bacteria (AOB) sequencing batch reactor (SBR) performing partial nitrification (PN) of synthetic reject wastewater. To achieve that, a SBR was subject to several shifts in temperature (in the range of 30 to 15 °C, 5 °C for each decrease). Cycle studies, which contain two aeration phases, were conducted under each temperature. The results showed that AOR specific exponentially correlates wit…
Start-up and Operation of Laboratory-Scale Thermophilic Upflow Anaerobic Sludge Blanket Reactors Treating Vegetable Processing Wastewaters
1997
Thermophilic anaerobic treatment of hot vegetable processing wastewaters was studied in laboratory-scale UASB reactors at 55°C. The high-strength wastewater streams, deriving from steam peeling and blanching of carrot, potato and swede were used. The reactors were inoculated with mesophilic granular sludge. Stable thermophilic methanogenesis with about 60% COD removal was reached within 28 days. During the 134 day study period the loading rate was increased up to 24 kg COD m−3 day−1. High treatment efficiency of more than 90% COD removal and concomitant methane production of 7·3 m3 CH4 m−3 day−1 were achieved. The anaerobic process performance was not affected by the changes in the wastewat…
Surface Pretreatment Boosts the Performance of Supramolecular Affinity Materials on Quartz Crystal Microbalances for Sensor Applications
2013
A Teflon-like coating is the key for the boost in sensitivity of quartz microbalances for the tracing of airborne analytes. Since the undesired signals for the interfering compounds are suppressed and the ones for the targeted compounds (e.g., peroxide explosives) are enhanced, the PCA output is improved.
Study of surface layers and ejected powder formed by oxidation of titanium substrates with a pulsed Nd:YAG laser beam.
2009
Laser treatment of a titanium surface at certain conditions initiates the formation of titanium oxide layers as well as micro (nano) scale powder ejected from the surface of the substrate. The resultant morphology of the surface as well as the size and the structure of the particles are all strongly dependent on the treatment parameters (laser fluence, pulse frequency, overlap parameter, etc.). In this study, titanium substrates were treated with an industrial pulsed Nd:YAG laser in air, with varying parameters. Surface layers and ejected materials were compared using scanning and transmission electron microscopy, X-ray diffraction and Raman spectroscopy. The rutile phase of TiO(2) dominate…
Removal of Surface Oxygen Vacancies Increases Conductance Through TiO(2) Thin Films for Perovskite Solar Cells
2019
[Image: see text] We report that UV–ozone treatment of TiO(2) anatase thin films is an efficient method to increase the conductance through the film by more than 2 orders of magnitude. The increase in conductance is quantified via conductive scanning force microscopy on freshly annealed and UV–ozone-treated TiO(2) anatase thin films on fluorine-doped tin oxide substrates. The increased conductance of TiO(2) anatase thin films results in a 2% increase of the average power conversion efficiency (PCE) of methylammonium lead iodide-based perovskite solar cells. PCE values up to 19.5% for mesoporous solar cells are realized. The additional UV–ozone treatment results in a reduced number of oxygen…
Characterization of poly(4-vinylpyridine 1-oxide) by free-solution capillary electrophoresis and micellar electrokinetic chromatography
2008
The migration characteristics of poly(4-vinylpyridine 1-oxide) (PVP-NO) in phosphate buffers of acidic pH (20 mM H 3 PO 4 or NaH 2 PO 4 ) have been studied using both free-solution capillary electrophoresis (FSCE) and MEKC. To inhibit adsorption, 250 mM o-phosphoethanolamine (2-aminoethyl dihydrogen phosphate) was used. In FSCE, PVP-NO showed a narrow peak and a broader band, both having anionic behavior. These peak and band were attributed to the free and aggregated or micellized PVP-NO forms, respectively. According to surface tension measurements, the CMC of SDS in the BGE was 1.8 and 0.48 mM in the absence and in the presence of 1000 μpg/mL PVP-NO, respectively, and the association of t…
Characterization and determination of poly(vinylpyrrolidone) by complexation with an anionic azo-dye and nonequilibrium capillary electrophoresis
2009
Using capillary zone electrophoresis in nonequilibrium conditions, the complexes of poly(vinylpyrrolidone) (PVP) with anionic azo-dyes dissociate following a first-order kinetics. Two peaks due to the remaining PVP-dye complexes and the equilibrium concentration of the free dye, plus an exponential region due to the dye liberated by the complexes during the electrophoretic run, are obtained. This behaviour was closely similar to that described in the literature for protein-probe and DNA-protein mixtures, upon application of the technique known as nonequilibrium capillary electrophoresis of equilibrium mixtures or NECEEM. Using Congo Red and Acid Blue 113, information about the maximal stoic…
Hyperbranched Polyglycerol-Based Lipids via Oxyanionic Polymerization: Toward Multifunctional Stealth Liposomes
2010
We describe the synthesis of linear-hyperbranched lipids for liposome preparation based on linear poly(ethylene glycol) (PEG) and hyperbranched polyglycerol (PG). Molecular weights were adjusted to values around 3000 g/mol with varying degrees of polymerization of the linear and the branched segments in analogy to PEG-based stealth lipids; polydispersities were generally low and below 1.3. The hydrophobic anchors were introduced into the lipid structures as initiators for the anionic polymerization of ethylene oxide and are either based on cholesterol or on different aliphatic glyceryl ethers. Complete incorporation of the apolar initiators was evidenced by MALDI-ToF analysis at all stages …