Search results for " interface"
showing 10 items of 1741 documents
Metal film growth on regular and defective MgO(001) surface: A comparative ab initio simulation and thermodynamic study
2006
Abstract In order to understand the difference in metallic film growth modes on perfect and defective oxide substrates, we have combined ab initio B3LYP periodic calculations on the slab models of the corresponding Me/MgO(0 0 1) interfaces (Me = Ag, Cu) with thermodynamic theory of solid solutions. For a defectless magnesia surface, we confirm the experimentally observed submonolayer growth of 3D metallic islands (Ag possesses a higher trend than Cu). Formation of Fs centers (neutral O vacancies) on the substrate markedly enhances metal atom adsorption as compared to physisorption over regular sites on a defect-free substrate. For the first time, we predict that the presence of these surfac…
Quantitative phase analysis and thickness measurement of surface-oxide layers in metal and alloy powders by the chemical-granular method
1998
The principles of the chemical-granular analysis of metal and alloy powders are reviewed and the results are compared with those provided by the spectroscopic analytical techniques XPS, AES and SIMS, including ion etching in their depth-profiling mode, when they are applied to the same materials. Several examples are analysed and it is shown that the chemical-granular method alone can provide the very same information as depth profiling. However, it is averaged over a macroscopic powder sample in contrast to one or a few single particles. Nevertheless, it is the combination of the chemical-granular and depth-profiling analyses that really provides an unparalleled description in quantitative…
The structure of pumice: An XPS and27Al MAS NMR study
1992
In order to investigate the surface structure of pumice, an amorphous aluminosilicate, samples of pumice and of standards of silica and alumina have been studied by x-ray photoelectron spectroscopy (XPS). The effect of a mild acid leaching was also considered. The analysis of the Si 2p, Al 2p and O 1s photoelectron peaks and the Si KLL and O KLL Auger peaks indicated that pumice is formed by tetrahedral silica with some units being replaced by aluminate, AlO2−. The acid treatment decreases the alkali and the aluminate ions. X-ray photoelectron spectra of the valence band of pumices and of standards of Al2O3 and SiO2 agree with the core-level results. To support the conclusions from the XPS …
Motional Resistance Evaluation of the Quartz Crystal Microbalance to Study the Formation of a Passive Layer in the Interfacial Region of a Copper|Dil…
2015
A hyphenated technique based on vis–NIR spectroscopy and electrochemical quartz crystal microbalance with motional resistance monitoring was employed to investigate the dissolution of copper in acid media. Changes in motional resistance, current, mass, and absorbance during copper dissolution allow the evolution of the interfacial region of copper|diluted sulfuric solution to be understood. In particular, motional resistance is presented in this work as a useful tool to observe the evolution of the passive layer at the interface. During the forced copper electrodissolution in sulfuric solution, SO4(2–) favors the formation of soluble [Cu(H2O)6]2+. On the contrary, OH– involves the formation…
MoO (x≤2) ultrathin film growth from reactions between metallic molybdenum and TiO2 surfaces
2001
Abstract Exposures to oxygen at room temperature and annealings under vacuum were carried out on deposits obtained from molybdenum interacting with (1 1 0) TiO 2 surfaces in order to obtain molybdenum oxide ultra thin films. Exposures to oxygen at room temperature show that the interfacial molybdenum oxide layers resulting from the TiO 2 /Mo interactions are inactive towards oxygen whereas the metallic molybdenum clusters, which grew on top of the interfacial layers, oxidise into MoO 3 . Besides, during annealings under vacuum, substrate oxygen anions can diffuse into the deposit. Thus, between 400 and 500°C, molybdenum oxide layers are progressively oxidised into MoO 2 . Moreover, from the…
Reactivity between molybdenum and TiO2(110) surfaces: evidence of a sub-monolayer mode and a multilayer mode
2005
Small amounts of molybdenum (from 0.03 to 1.3 eqML) were deposited on non-stoichiometric TiO 2 (1 1 0) surface. The deposits were investigated by means of LEED and X-ray/UV photoemission using synchrotron radiation. For the smallest coverage (<0.2 eqML), deposition leads to oxidation of molybdenum into species close to Mo 4+ .In such a case, states appearing in TiO 2 band gap are mainly due to reduced titanium. For higher coverages, metallic behaviour of molybdenum is observed. This phenomenon was explained, thanks to first principle calculations, as a decrease of the Mo-O interactions for the benefit of the Mo-Mo interactions as the surface molybdenum atom density increases.
Capillary Hysteresis in Nanopores: Theoretical and Experimental Studies of Nitrogen Adsorption on MCM-41
1995
Capillary hysteresis in cylindrical nanopores has been studied using MCM-41 as the prime example of a mesoporous material. These materials, due to their regular pore structure, can be considered to be candidates for reference adsorbents for standardizing adsorption measurements and methods for characterization of porous solids. They provide a unique opportunity for verification of theoretical models employed for predicting phase equilibrium in confined geometry. Three samples with monodisperse pore channels have been synthesized and examined using X-ray diffraction (XRD). Nitrogen adsorption isotherms were modeled using nonlocal density functional theory (NLDFT) in a wide range of pore size…
A Density Functional Theory study on gold cyanide interactions: The fundamentals of ore cleaning
2010
We have employed Density Functional Theory calculations to study the adsorption of CN, CN− and KCN on Au(111) and Au(211) surfaces and compare the obtained results to CO. The adsorption of CN, CN−, and KCN are exothermic with respect to the gas-phase moieties, and the adsorption energy increases at steps. Our results show that the binding mechanism of CN− is different from that of CO. The projected LDOS indicates that the bond between the flat surface and CN shows very small overlap between metal and CN states. This overlap increases provided that extra charge is present or low-coordinated Au atoms are available. Charge transfer is analyzed via the Bader method and the Electron Localization…
Study of interface diffusion of Ti and TiN PVD layers by Bremsstrahlung-induced AES
1992
The influence of heat treatment in ultrahigh vacuum (UHV) on Ti and TiN layers coated by physical vapour deposition (PVD) has been studied by AES, XPS and bremsstrahlung-induced AES. It could be concluded that up to 500 o C (1 h) the Ti layer does not change significantly. At the TiN/steel substrate interface, however, a counter-diffusion of nitrogen and adventitious oxygen takes place, resulting in partial nitridation of the steel substrate and oxidation of the coating
Recombination processes in rare-earth doped MAl2O4(M = Ca, Sr) persistent phosphors investigated by optically-detected magnetic resonance
2007
Single crystalline MAl 2 O 4 (M = Ca and Sr) persistent phosphors, which are nominally pure or additionally doped with Eu and Nd or Dy, respectively, were investigated for their recombination luminescence (RL) and microwave-induced changes in the RL at low temperatures. The analysis of the optically-detected electron paramagnetic resonance (EPR) spectra, recorded after ultraviolet excitation at 4.2 K, shows that intrinsic donor and acceptor centres are involved in the recombination process. Spectral dependent RL-EPR measurements on undoped CaAl 2 O 4 (CAO) and SrAl 2 O 4 (SAO) show that we deal with only one donor but at least two different acceptors. The g value of the donor is 1.99 in CAO…