Search results for " ionization"
showing 10 items of 621 documents
Ultra Trace Determination Scheme for26Al by High-Resolution Resonance Ionization Mass Spectrometry using a Pulsed Ti:Sapphire Laser
2008
We propose an ultra trace analysis approach for 26Al by high-resolution Resonance Ionization Mass Spectrometry (RIMS) using a pulsed narrow band-width Ti:Sapphire laser. For ensuring efficient ionization and high isotopic selectivity in RIMS of Al, we developed an injection seeded pulsed Ti:Sapphire laser with high repetition rate operation at up to 10 kHz. The laser produced an output power of 2 W and a spectral band-width of ~20 MHz with a repetition rate of 7 kHz. A first demonstration of its performance was done by detecting stable 27Al using RIMS.
First observation of a resonance ionization signal on242mAm fission isomers
1992
The feasibility of a hyperfine spectroscopy on242mAm fission isomers has been demonstrated at the low target production rate of 10/s. The experimental method employed is based on resonance ionization spectroscopy in a buffer gas cell with detection of the ionization process by means of the fission decay of the isomers. The resonance ionization has been performed in two steps, utilizing an excimer dye laser combination with a repetition rate of 300 Hz. The first resonant step proceeds through theJ=7/2 term at 21440.35 cm−1, which has been excited with the tuncable dye laser beam of a wavelength of 466.28 nm, the second non-resonant step is achieved with the 351 nm radiation of the excimer la…
Radiation detected resonance ionization spectroscopy on208Tl and242fAm
1993
An ultra-sensitive laser spectroscopic method has been developed for the hyperfine spectroscopy of short-lived isotopes far off stability produced by heavy ion induced nuclear reactions at very weak intensity (> 1/s). It is based on resonance ionization spectroscopy in a buffer gas cell with radiation detection of the ionization process (RADRIS). As a first on-line application of RADRIS optical spectroscopy at242fAm fission isomers is in progress at the low target production rate of 10/s. The resonance ionization has been performed in two steps utilizing an excimer dye laser combination with a repetition rate of 300 Hz. The first resonant step proceeds through terms which correspond to wave…
Laser preparation of bunched ion beams
1997
Abstract Laser ionization at ISOLDE is performed with high repetition laser beams in the ion source unit and for daughter elements with low repetition lasers synchronized with laser desorption from a secondary target. We are preparing an implementation of thermal adsorption followed by laser desorption and laser ionization in the target ion source unit of ISOLDE. The combination of resonance ionization with thermal bunching allows the preparation of bunched and chemically pure ion beams. Bunched ion beams of Mg or Ca are prepared for post-acceleration at REX-ISOLDE. In order to investigate the process of adsorption and pulsed laser desorption, experiments are performed with Ba vapour. In a …
MELISSA: Laser ion source setup at CERN-MEDICIS facility. Blueprint
2019
The Resonance Ionization Laser Ion Source (RILIS) has become an essential feature of many radioactive ion beam facilities worldwide since it offers an unmatched combination of efficiency and selectivity in the production of ion beams of many different chemical elements. In 2019, the laser ion source setup MELISSA is going to be established at the CERN-MEDICIS facility, based on the experience of the workgroup LARISSA of the University Mainz and CERN ISOLDE RILIS team. The purpose is to enhance the capability of the radioactive ion beam supply for end users by optimizing the yield and the purity of the final product. In this article, the blueprint of the laser ion source, as well as the key …
Off-line studies of the laser ionization of yttrium at the IGISOL facility
2007
A laser ion source is under development at the IGISOL facility, Jyvaskyla, in order to address deficiencies in the ion guide technique. The key elements of interest are those of a refractory nature, whose isotopes and isomers are widely studied using both laser spectroscopic and high precision mass measurement techniques. Yttrium has been the first element of choice for the new laser ion source. In this work we present a new coupled dye-Ti:Sapphire laser scheme and give a detailed discussion of the results obtained from laser ionization of yttrium atoms produced in an ion guide via joule heating of a filament. The importance of not only gas purity, but indeed the baseline vacuum pressure in…
Very high specific activity erbium 169Er production for potential receptor-targeted radiotherapy
2019
Erbium 169Er is one of the most interesting radiolanthanides for new potential receptor-targeted β− therapy applications due to its low energy β− emissions, very low intensity ɣ rays and the possibility to use 68Ga or 44Sc as companion for diagnostic in a theranostics approach. Currently it can be produced in reactors through the neutron activation of highly enriched 168Er. The low specific activity of the produced carrier-added 169Er is limiting its use for receptor-targeted therapy. Nonetheless it is used for radiosynoviorthesis of small joints. The aim of this work is to develop a new large-scale production method for the supply of very high specific activity 169Er. Highly enriched 168Er…
RILIS-ionized mercury and tellurium beams at ISOLDE CERN
2017
This paper presents the results of ionization scheme development for application at the ISOLDE Resonance Ionization Laser Ion Source (RILIS). Two new ionization schemes for mercury are presented: a three-step three-resonance ionization scheme, ionizing via an excitation to a Rydberg level and a three-step two-resonance ionization scheme, with a non-resonant final step to the ionization continuum that corresponded to a factor of four higher ionization efficiency. The efficiency of the optimal mercury ionization scheme was measured, together with the efficiency of a new three-step three resonance ionization scheme for tellurium. The efficiencies of the mercury and tellurium ionization schemes…
Resonance ionization schemes for high resolution and high efficiency studies of exotic nuclei at the CRIS experiment
2019
© 2019 This paper presents an overview of recent resonance ionization schemes used at the Collinear Resonance Ionization Spectroscopy (CRIS) setup located at ISOLDE, CERN. The developments needed to reach high spectral resolution and efficiency will be discussed. Besides laser ionization efficiency and high resolving power, experiments on rare isotopes also require low-background conditions. Ongoing developments that aim to deal with beam-related sources of background are presented. ispartof: Nuclear Instruments & Methods In Physics Research Section B-Beam Interactions With Materials And Atoms vol:463 pages:398-402 ispartof: location:SWITZERLAND, CERN, Geneva status: published
Certification of a 41Ca dose material for use in human studies (IRMM-3703) and a corresponding set of isotope reference materials for 41Ca measuremen…
2005
Abstract The long-living radioisotope 41Ca could overcome current limitations in assessing the impact of interventions on bone health in controlled human studies. Changes in bone Ca metabolism can be identified directly via the induced changes in 41Ca excretion from 41Ca-labelled bones via the n(41Ca)/n(40Ca) ratio in urine. A 41Ca dose material (IRMM-3703), for use in human studies, was produced by IRMM within the EC funded project OSTEODIET. The 41Ca base material was purified and the purified solution is certified for both isotopic composition and amount content by isotope dilution mass spectrometry. The 44Ca-enriched isotope reference material, IM-6009, was used as spike and the natural…