Search results for " layer"
showing 10 items of 1022 documents
Low Current Density Driving Leads to Efficient, Bright and Stable Green Electroluminescence
2013
Electroluminescent devices have the potential to reshape lighting and display technologies by providing low-energy consuming solutions with great aesthetic features, such as flexibility and transparency. In particular, light-emitting electrochemical cells (LECs) are among the simplest electro-luminescent devices. The device operates with air-stable materials and the active layer can be resumed to an ionic phosphorescent emitter. As a consequence, LECs can be assembled using solution-process technologies, which could allow for low-cost and large-area lighting applications in the future. High efficiencies have been reported at rather low luminances (<50 cd m(-2)) and at very low current densi…
Characterization of micro-fibrillated cellulose fiber suspension flow using multi scale velocity profile measurements
2017
Rheological properties and boundary layer flow behavior of Micro Fibrillated Cellulose (MFC) suspended in water was studied using a novel velocity profiling rheometric technique. The method is based on measuring stationary velocity profiles of fluid flow in a straight tube simultaneously by Doppler Optical Coherence Tomography (DOCT) and by Ultrasound Velocity Profiling (UVP). The high resolution DOCT provides velocity profiles near the transparent tube wall, while UVP yields corresponding information in the interior parts of the flow. The data from the two instruments is combined into a comprehensive velocity profile including both the thin boundary layer near the wall and the interior par…
Antimicrobial Bilayer Nanocomposites Based on the Incorporation of As-Synthetized Hollow Zinc Oxide Nanotubes
2020
© 2020 by the authors.
Preliminary study on the laser cleaning of stainless steels after high temperature oxidation
2000
Abstract The objective of the present work was to estimate the influence of pulsed laser irradiation on the removal of the oxide layer, which is developed on the surface of stainless steels during their exposure to high temperature oxidation. In general, this layer is a protective one, mainly against corrosion. However, in many manufacturing applications or maintenance work, the removal of the oxides is necessary; for example, the metallic surfaces should be cleaned before welding, otherwise the presence of oxides increases the tendency to brittle behaviour of the joint. In this study, a pulsed Nd:YAG laser (λ=1.064 μm, 10 ns) was used for the surface cleaning of three stainless steels with…
Interaction effect of Nd:YAG laser and universal adhesive system for dentin sealing
2020
Made available in DSpace on 2021-06-25T10:46:55Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-01-01 Background: To evaluate the influence of the association of the universal adhesive system to different energy densities of the Nd:YAG laser on the hydraulic conductance of dentin. Material and Methods: Fifty bovine dentin discs were made. The samples were stratified into four groups (n = 10) according to the treatment performed; SBU- Adper Single Bond Universal (3M ESPE), SBU_60 - SBU associated with the Nd:YAG laser (60mJ, 10Hz, 0.6W - 47.77 J / cm²), SBU_80 - SBU associated with the Nd:YAG laser (80mJ, 10Hz, 0.8 W - 63.69 J / cm2) and C – dentin without treatment (smear layer). Hyd…
Comparative study of debris and smear layer removal with EDTA and Er,Cr:YSGG laser.
2018
Background To evaluate in vitro, the ability in removing debris and Smear Layer of 17% EDTA and Er,Cr:YSGG laser. Material and methods 58 unirradicular teeth were instrumented with MTwo® and divided into 3 groups according to irrigation protocol: 17%EDTA, laser and a combination of 17%EDTA and laser. All samples were analyzed in the apical and middle third with Scanning Electron Microscope. The Chi-cuadrado and McNemar tests were used to determine the statistical analysis and data processing and analysis was performed with the statistical package StatGraphics Centurion XVI. Results Debris analysis showed statistical significant differences when compared EDTA vs laser and EDTA vs EDTA+laser …
A Comparative Evaluation of Smear Layer Removal Using Apical Negative Pressure (EndoVac), Sonic Irrigation (EndoActivator) and Er:YAG laser -An In Vi…
2017
Background This study aimed to compare the smear layer removing efficacy of the EndoActivator, EndoVac and Er:YAG laser in extracted mandibular premolars, at the apical, middle and coronal third of root canal, through scanning electron microscopy. Material and methods 40 extracted mandibular premolars were decoronated to a standardized length of 12 mm. Specimens were shaped to ProTaper F4 size and irrigated with 5.25% sodium hypochlorite at 370C between instrumentation. Teeth were divided into four groups (n=10), one control (needle irrigation) and three experimental, according to the irrigant activation technique used i.e. sonic irrigation (EndoActivator), apical negative pressure (EndoVac…
Structural defects in Hg1−xCdxI2 layers grown on CdTe substrates by vapor phase epitaxy
1997
Hg1−xCdxI2 20–25-μm-thick layers with a uniform composition in the range of x = 0.1–0.2 were grown on CdTe substrates by vapor phase epitaxy (VPE). The growth was carried out using an α-HgI2 polycrystalline source at 200 °C and in the time range of 30–100 h. The layers were studied by scanning electron microscopy (SEM) and high resolution synchrotron x-ray topography (SXRT). The SEM and SXRT images of Hg1−xCdxI2 VPE layers allow one to identify the defects affecting the layer structure. The two main types of structural defects in the layers are subgrain boundaries and densely spaced striations similar to those referred generally to as vapor grown HgI2 bulk crystals. The effect of the growth…
Properties of atomic layer deposited nanolaminates of zirconium and cobalt oxides
2018
Producción Científica
Room-temperature plasma-enhanced atomic layer deposition of ZnO: Film growth dependence on the PEALD reactor configuration
2017
Room-temperature plasma-enhanced atomic layer deposition (PEALD) of ZnO was studied by depositing the films using diethylzinc and O2 plasma from inductively-coupled plasma (ICP) and capacitively-coupled plasma (CCP) plasma source configurations. The CCP-PEALD was operated using both remote and direct plasma. It was observed that the films deposited by means of remote ICP and CCP were all highly oxygen rich, independently on plasma operation parameters, but impurity (H, C) contents could be reduced by increasing plasma pulse time and applied power. With the direct CCP-PEALD the film composition was closer to stoichiometric, and film crystallinity was enhanced. The ZnO film growth was observe…